Is vanadium a good electrical conductor?

Is vanadium a good electrical conductor?
by

1 Answer

Answer :

Vanadium has slightly less resisitivity than lead, but approximately 11 times that of copper. It is not normally used as an electrical conductor, but is used in redox flow batteries and certain semiconductor applications.
by

Related questions

What is the sign of vanadium ?

Description : What is the sign of vanadium ?

Last Answer : V Vanadium's signal

What is the atomic mass of vanadium ?

Description : What is the atomic mass of vanadium ?

Last Answer : This is the atomic mass of 51

A vanadium electrically, if the magnetic moment (spin only) of the vanadium product is 1.73 B.M. and the mass of electrode decreases by 102 mg during

Description : A vanadium electrically, if the magnetic moment (spin only) of the vanadium product is 1.73 B.M. and the mass of electrode decreases by 102 mg during

Last Answer : A vanadium electrically, if the magnetic moment (spin only) of the vanadium product is 1.73 B.M. and ... current efficiency 100%, At. wt. of V = 51)

A compound of vanadium has a magnetic moment `(mu)` of 1.73 BM. If the vanadium ion in the compound is present as `V^(x+)` then, the value of x is ?

Description : A compound of vanadium has a magnetic moment `(mu)` of 1.73 BM. If the vanadium ion in the compound is present as `V^(x+)` then, the value of x is ?

Last Answer : A compound of vanadium has a magnetic moment `(mu)` of 1.73 BM. If the vanadium ion in the compound is present as `V ... of x is ? A. 1 B. 2 C. 3 D. 4

What is the formula for Vanadium (V) sulfide?

Description : What is the formula for Vanadium (V) sulfide?

Last Answer : vanadium2sulfide5

What is chemical formula for vanadium carbonate?

Description : What is chemical formula for vanadium carbonate?

Last Answer : Vanadium carbonate has the chemical formula V(CO3)2.

Is vanadium cutlery better than stainless steel?

Description : Is vanadium cutlery better than stainless steel?

Last Answer : Any cutlery containing vanadium will hold its edge longer but also be harder to sharpen when dull.

Which of the following elements is obtained from the sea algae? (1) Argon (2) Sulphur (3) Vanadium (4) Iodine

Description : Which of the following elements is obtained from the sea algae? (1) Argon (2) Sulphur (3) Vanadium (4) Iodine

Last Answer : (4) Iodine Explanation: Fusus vesiculosus is a brown seaweed and is also known as bladder wrack or red algae, according to the National Institutes of Health (NTH). Red marine algae ... dietary supplements. The high iodine content in red marine algae can lead to hypothyroidism or hyperthyroidism.

Which of the following elements is obtained from sea weeds? (1) Iodine (2) Vanadium (3) Argon (4) Sulphur

Description : Which of the following elements is obtained from sea weeds? (1) Iodine (2) Vanadium (3) Argon (4) Sulphur

Last Answer : (1) Iodine Explanation: Seaweed is rich in iodine, a trace element essential for healthy thyroid function and a healthy metabolism. Iodine is particularly vital for pregnant and lactating women. Seaweed also contains zinc and anti-okidants, which help strengthen immunity.

The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Description : The term PVC used in the plastic industry stands for - (1) polyvinyl chloride (2) polyvinyl carbonate (3) phosphor vanadium chloride (4) phosphavinyl chloride

Last Answer : (1) polyvinyl chloride Explanation: Polyvinyl chloride is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. About 40 million tones are produced per year.

Which of the following elements is obtained from sea weeds? (1) Argon (2) Sulphur (3) Vanadium (4) Iodine

Description : Which of the following elements is obtained from sea weeds? (1) Argon (2) Sulphur (3) Vanadium (4) Iodine

Last Answer : (4) Iodine Explanation: Ribbon seaweeds(sp. laminaria) contain iodine compounds which they obtain by extracting iodide ions from seawater.

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

. Invar contains the highest percentage of (A) Vanadium (B) Iron (C) Tungsten (D) Cobalt

Description : . Invar contains the highest percentage of (A) Vanadium (B) Iron (C) Tungsten (D) Cobalt

Last Answer : (B) Iron

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

__________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (D) Molybdenum

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (C) Tungsten

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Last Answer : (B) Tungsten, chromium and vanadium

Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Last Answer : (B) Cobalt, chromium and tungsten

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

Corrosion resisting properties of cast iron are significantly improved by the addition of 12 - 15% of (A) Tungsten (B) Vanadium (C) Silicon (D) All (A), (B) & (C)

Description : Corrosion resisting properties of cast iron are significantly improved by the addition of 12 - 15% of (A) Tungsten (B) Vanadium (C) Silicon (D) All (A), (B) & (C)

Last Answer : (C) Silicon

Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Last Answer : (A) Chromium

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Which of the following has no effect on the carbide forming tendency insteels?(A) Molybdenum(B) Phosphorus(C) Chromium(D) Vanadium

Description : Which of the following has no effect on the carbide forming tendency insteels? (A) Molybdenum (B) Phosphorus (C) Chromium (D) Vanadium

Last Answer : (B) Phosphorus

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Last Answer : (B) Iron

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

__________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Last Answer : (B) No

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Last Answer : (B) Cobalt, chromium & tungsten

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

__________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (C) Cobalt

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (A) Molybdenum

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : (A) Manganese

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : r: Option A

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Last Answer : Answer: Option D

PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Description : PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Last Answer : Answer: Option B

Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Description : Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Last Answer : Answer: Option D

The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Description : The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Last Answer : Answer: Option C

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

It may also be minimized by adding minimizes called stabilizers. These may be: a) Vanadium/Titanium b) Titanium/Niobium c) Niobium/Vanadium d) Vanadium/Titanium/Niobium

Description : It may also be minimized by adding minimizes called stabilizers. These may be: a) Vanadium/Titanium b) Titanium/Niobium c) Niobium/Vanadium d) Vanadium/Titanium/Niobium

Last Answer : b) Titanium/Niobium