Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring

Vanadium steel is generally used for
(A) Railway switches and crossing
(B) Bearing balls
(C) Magnets
(D) Axles and spring
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process is known as

Description : Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process is known as

Last Answer : Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process ... hardening B. sheradising C. annelaing D. tempering

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

As shown in the illustration, all 'MS' contacts are opened and closed by means of ________. EL-0073 A. operating coils B. magnets C. manual operation of the master switches D. solenoid switches

Description : As shown in the illustration, all 'MS' contacts are opened and closed by means of ________. EL-0073 A. operating coils B. magnets C. manual operation of the master switches D. solenoid switches

Last Answer : Answer: C

Tractors can be generally classified by number of or wheels A. Axles C. Single Wheel

Description : Tractors can be generally classified by number of or wheels A. Axles C. Single Wheel

Last Answer : Axles

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Description : In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Last Answer : Answer: Option B

Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Last Answer : Answer: Option D

The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Description : The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Last Answer : Answer: Option C

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

In a railway track, two rails are joined end to end with a gap in between them because – (1) steel can be saved (2) accidents due to contraction in winter can be avoided (3) air-gaps are necessary for bearing the weight of running train (4) accidents due to expansion in summer can be avoided.

Description : In a railway track, two rails are joined end to end with a gap in between them because – (1) steel can be saved (2) accidents due to contraction in winter can be avoided (3) air-gaps are necessary for bearing the weight of running train (4) accidents due to expansion in summer can be avoided.

Last Answer : (4) accidents due to expansion in summer can be avoided. Explanation: The volume of materials changes depending on current temperature. Usually heat makes them expand, and cold leads them to contract. ... on the tracks. The same applies in many other fields of engineering, i.e. bridge building.

In a railway track, two rails are joined end to end with a gap tin between them because? A. Steel can be saved B. Accidents due to contraction in winter can be avoided C. Air gaps are necessary for bearing the weight of running train D. Accidents due to expansion in summer can be avoided (Answer) E. All of these

Description : In a railway track, two rails are joined end to end with a gap tin between them because? A. Steel can be saved B. Accidents due to contraction in winter can be avoided C. Air gaps are necessary ... of running train D. Accidents due to expansion in summer can be avoided (Answer) E. All of these

Last Answer : D. Accidents due to expansion in summer can be avoided (Answer)

In a railway track, two rails are joined end to end with a gap in between thembecause (1) steel can be saved (2) accidents due to contraction in winter can be avoided (3) air-gaps are necessary for bearing the weight of running train (4) accidents due to expansion in summer can be avoided.

Description : In a railway track, two rails are joined end to end with a gap in between thembecause (1) steel can be saved (2) accidents due to contraction in winter can be avoided (3) air-gaps are necessary for bearing the weight of running train (4) accidents due to expansion in summer can be avoided.

Last Answer :  accidents due to expansion in summer can be avoided.

If metres is the distance between extreme axles of a vehicle, its gross load should not exceed (A) 1525 (L + 4.3) - 14.7 L2 (B) 1526 (L + 5.3) - 14.7 L2 (C) 1525 (L + 6.3) - 14.7 L2 (D) 1525 (L + 7.3) - 14.7 L2

Description : If metres is the distance between extreme axles of a vehicle, its gross load should not exceed (A) 1525 (L + 4.3) - 14.7 L2 (B) 1526 (L + 5.3) - 14.7 L2 (C) 1525 (L + 6.3) - 14.7 L2 (D) 1525 (L + 7.3) - 14.7 L2

Last Answer : Answer: Option D

Permanent magnets are made of high carbon steel and (A) 15% of cobalt (B) 20% of cobalt (C) 35% of cobalt (D) 45% of cobalt

Description : Permanent magnets are made of high carbon steel and (A) 15% of cobalt (B) 20% of cobalt (C) 35% of cobalt (D) 45% of cobalt

Last Answer : Answer: Option D

Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Description : Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Last Answer : (D) Carbon chrome

Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Description : Which of the following contains maximum percentage of carbon? (A) Boiler plate steel (B) Rail steel (C) Saws for cutting steel (D) Railway spring steel

Last Answer : (C) Saws for cutting steel

Along high ways confirmatory route markers are generally fixed (A) Before the crossing on the left side (B) After the crossing on the left side (C) Before the crossing on the right side (D) After the crossing on the right side

Description : Along high ways confirmatory route markers are generally fixed (A) Before the crossing on the left side (B) After the crossing on the left side (C) Before the crossing on the right side (D) After the crossing on the right side

Last Answer : Answer: Option B

Is vanadium cutlery better than stainless steel?

Description : Is vanadium cutlery better than stainless steel?

Last Answer : Any cutlery containing vanadium will hold its edge longer but also be harder to sharpen when dull.

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

__________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (D) Molybdenum

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (C) Tungsten

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Last Answer : (B) Tungsten, chromium and vanadium

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Last Answer : (A) Chromium

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

__________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (C) Cobalt

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (A) Molybdenum

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : (A) Manganese

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : r: Option A

Permanent magnets are generally made of

Description : Permanent magnets are generally made of

Last Answer : Alnico alloys

electromagnets generally function as holding magnets. (a) Tractive (b) Portative (c) Either of the above (d) None of the above

Description : electromagnets generally function as holding magnets. (a) Tractive (b) Portative (c) Either of the above (d) None of the above

Last Answer : (b) Portative

The place where a railway line and a road cross each other at the same level, is known as A. Level Crossing B. Cross over C. Rail Junction D. Road Junction

Description : The place where a railway line and a road cross each other at the same level, is known as A. Level Crossing B. Cross over C. Rail Junction D. Road Junction

Last Answer : A [Level Crossing] Explanation: A level crossing (also called a grade crossing, a railway crossing, or a railroad crossing) is a place where a railway line and a road meet each other on the same level.

On Indian Railways a new level crossing can be provided with the approval of a) Chief engineer b) General Manager c) Commissioner of Railway Safety d) None of the above*

Description : On Indian Railways a new level crossing can be provided with the approval of a) Chief engineer b) General Manager c) Commissioner of Railway Safety d) None of the above*

Last Answer : d) None of the above

Speed breaker of approved design shall be provided on either side of level crossing at ------ within Railway boundary a) 5 meters b) 15 meters c) 20 meters* d0 30 meters

Description : Speed breaker of approved design shall be provided on either side of level crossing at ------ within Railway boundary a) 5 meters b) 15 meters c) 20 meters* d0 30 meters

Last Answer : c) 20 meters

Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Description : Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Last Answer : c) 20 meters*

When the railway crosses a deep vally without perinial water,it is called……. a)Aqueduct * b)Cause way c)Via-duct d)River crossing

Description : When the railway crosses a deep vally without perinial water,it is called……. a)Aqueduct * b)Cause way c)Via-duct d)River crossing

Last Answer : a)Aqueduct *

What size socket do you need to change the wheel bearings on 1998 GMC Jimmy front and back axles?

Description : What size socket do you need to change the wheel bearings on 1998 GMC Jimmy front and back axles?

Last Answer : Need to know if 2 wheel or 4 wheel drive for the front. Eitherway, there is no nut on the back axles.

How are levers and wheels and axles different?

Description : How are levers and wheels and axles different?

Last Answer : Feel Free to Answer

Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Description : Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Last Answer : (a) Bending moment only

Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Description : Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Last Answer : c. At angle slightly lesser or greater than 90 of axles can meet

Bearings used to support axles of traction coaches are

Description : Bearings used to support axles of traction coaches are   (a) Ball bearings (b) Bush bearings (c) Roller bearings (d) Journal bearings

Last Answer : Bearings used to support axles of traction coaches are Roller bearings

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Description : Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Last Answer : (B) Powerful magnets

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D