When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?
by

1 Answer

Answer :

If the clutch is totally worn out there is nothing left.
by

Related questions

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Description : When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Last Answer : If the clutch is totally worn out there is nothing left.

The clutch friction disc is splined to fit over the splines of the pilot bearing

Description : The clutch friction disc is splined to fit over the splines of the pilot bearing

Last Answer : Need Answer

State the location and function of Torsion damper spring and pressure spring in a single plate dry disc clutch.

Description : State the location and function of Torsion damper spring and pressure spring in a single plate dry disc clutch.

Last Answer : Torsion damper spring:  Location: They are small coil springs located between the clutch disc splined hub and the friction disc assembly.  Function: These springs provides a flexible torsional ... locks the engine to the transmission input shaft, causing them to spin at the same speed.

How do you fix torque converter clutch circuit stuck on?

Description : How do you fix torque converter clutch circuit stuck on?

Last Answer : Feel Free to Answer

A tractor is an engineering vehicle specifically designed to deliver a high torque at speeds A. High C. Slow B. Extreme High D. Medium

Description : A tractor is an engineering vehicle specifically designed to deliver a high torque at speeds A. High C. Slow B. Extreme High D. Medium

Last Answer : Slow

whats the average price (Labor only) to installed a clutch on a pathfinder 4by4 v6 engine 5 speed transmission?

Description : whats the average price (Labor only) to installed a clutch on a pathfinder 4by4 v6 engine 5 speed transmission?

Last Answer : The average cost is about $700 for the labor only.

In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch

In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Last Answer : (A) Engine and clutch

A power tiller consist of the following main components a) Engine c) Transmission gear b) Clutch d) All of the above

Description : A power tiller consist of the following main components a) Engine c) Transmission gear b) Clutch d) All of the above

Last Answer : All of the above

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

A current-carrying conductor making electrical contact with a wiring conduit will be indicated by a _____________. A. high switchboard wattmeter reading B. totally dark switchboard ground detecting light C. low switchboard wattmeter reading D. all of the above

Description : A current-carrying conductor making electrical contact with a wiring conduit will be indicated by a _____________. A. high switchboard wattmeter reading B. totally dark switchboard ground detecting light C. low switchboard wattmeter reading D. all of the above

Last Answer : Answer: B

A current carrying conductor making an electrical contact with a wiring metal conduit is indicated by a _____________. A. low switchboard wattmeter reading B. reading of 1.0 on the power factor meter C. high switchboard voltmeter reading D. totally darkened switchboard ground-detecting light

Description : A current carrying conductor making an electrical contact with a wiring metal conduit is indicated by a _____________. A. low switchboard wattmeter reading B. reading of 1.0 on the power factor meter C. high switchboard voltmeter reading D. totally darkened switchboard ground-detecting light

Last Answer : Answer: D

A centrifugal pump designed for handling water (μ = 1 cp) will deliver __________ when pumping a thicker oil (μ = 30 cp). (A) Less head & capacity (B) More head (C) More capacity (D) Less head & more capacity

Description : A centrifugal pump designed for handling water (μ = 1 cp) will deliver __________ when pumping a thicker oil (μ = 30 cp). (A) Less head & capacity (B) More head (C) More capacity (D) Less head & more capacity

Last Answer : (A) Less head & capacity

The operating torque of the upper induction disc-type element, or timer element, of an AC reverse power relay is obtained from ____________. A. the main bus B. a separate battery source C. line voltage D. electromagnets

Description : The operating torque of the upper induction disc-type element, or timer element, of an AC reverse power relay is obtained from ____________. A. the main bus B. a separate battery source C. line voltage D. electromagnets

Last Answer : Answer: D

For controlling the vibration of the disc of ac energy meter, damping torque is produced by

Description : For controlling the vibration of the disc of ac energy meter, damping torque is produced by

Last Answer : For controlling the vibration of the disc of ac energy meter, damping torque is produced by Eddy current

The capacity of an accumulator is the maximum (A) Energy which it can store (B) Discharge which it can deliver (C) Liquid which it can store (D) None of these

Description : The capacity of an accumulator is the maximum (A) Energy which it can store (B) Discharge which it can deliver (C) Liquid which it can store (D) None of these

Last Answer : (A) Energy which it can store

A 120 Ah capacity battery can deliver a current of 8A for a period of

Description : A 120 Ah capacity battery can deliver a current of 8A for a period of

Last Answer : A 120 Ah capacity battery can deliver a current of 8A for a period of 15

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) is zero. Reasonl Magnetic moment (M) is inward

Description : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) is zero. Reasonl Magnetic moment (M) is inward

Last Answer : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) ... . Reasonl Magnetic moment (M) is inwards.

A current carrying loop is placed in a uniform magnetic field. The torque acting on it does not depend upon

Description : A current carrying loop is placed in a uniform magnetic field. The torque acting on it does not depend upon

Last Answer : A current carrying loop is placed in a uniform magnetic field. The torque acting on it does not ... turns in the loop D. strength of the current

The torque expression of a current carrying conductor is a) T = BIA cos θ b) T = BA cos θ c) T = BIA sin θ d) T = BA sin θ

Description : The torque expression of a current carrying conductor is a) T = BIA cos θ b) T = BA cos θ c) T = BIA sin θ d) T = BA sin θ

Last Answer : c) T = BIA sin θ

How many horsepower will a 3 cylinder engine deliver?

Description : How many horsepower will a 3 cylinder engine deliver?

Last Answer : Well, based on my research, the average Horsepower delivered from a 3 cylinder engine is around 180 to 200, on average. It would also depend on the car it is going into and furthermore, with ... means increased cylinders to make up the difference to be able to move a car and distribute the force.

Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at high speed. C. To permit the generation to deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.

Do your white socks become left and right after you've worn them a few times?

Description : Do your white socks become left and right after you've worn them a few times?

Last Answer : All my socks are lefties.

Why are wedding rings worn on the left hand instead of the right?

Description : Why are wedding rings worn on the left hand instead of the right?

Last Answer : Wedding rings are worn on the left hand because it is connected to the heart and the heart symbolises love.

The ……… offers more than five times the storage capacity of traditional DVDs. (a) Compact disc (b) Pen drive (c) Blu_ray disc (d) Ext_DVD -Technology

Description : The ……… offers more than five times the storage capacity of traditional DVDs. (a) Compact disc (b) Pen drive (c) Blu_ray disc (d) Ext_DVD -Technology

Last Answer : c) Blu-ray disc can hold almost 5 times more data than a single layer DVD.

How much torque and horse power does a small engine have?

Description : How much torque and horse power does a small engine have?

Last Answer : How small is a small engine? One could only guess.

How much torque and horse power does a small engine have?

Description : How much torque and horse power does a small engine have?

Last Answer : How small is a small engine? One could only guess.

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Description : In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Last Answer : Answer: Option B

Disc windings are primarily used in (a) short capacity transformers (b) medium capacity transformers (c) high capacity transformers (d) any of the above

Description : Disc windings are primarily used in (a) short capacity transformers (b) medium capacity transformers (c) high capacity transformers (d) any of the above

Last Answer : (c) high capacity transformers

A engine will generate maximum torque when it a. runs at maximum speed b. develops maximum power c. runs at lowest speed d. consumes more fuel

Description : A engine will generate maximum torque when it a. runs at maximum speed b. develops maximum power c. runs at lowest speed d. consumes more fuel

Last Answer : ANSWER c. runs at lowest speed

The static load carrying capacity of fine threads is greater than that of coarse threads. a) True b) False

Description : The static load carrying capacity of fine threads is greater than that of coarse threads. a) True b) False

Last Answer : b) False

When does the growth rate of a population following the logistic model equal zero? The logistic model is given as dN/dt = rN(1–N/K) (a) when N/K equals zero (b) when death rate is greater than birth rate (c) when N/K is exactly one (d) when N nears the carrying capacity of the habitat.

Description : When does the growth rate of a population following the logistic model equal zero? The logistic model is given as dN/dt = rN(1–N/K) (a) when N/K equals zero (b) when death rate is greater than birth rate (c) when N/K is exactly one (d) when N nears the carrying capacity of the habitat.

Last Answer : (a) when N/K equals zero

TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Last Answer : Option B

The load carrying capacity of a helically reinforced column as compared to that of a tied column is about (A) 5 % less (B) 10 % less (C) 5 % more (D) 10 % more

Description : The load carrying capacity of a helically reinforced column as compared to that of a tied column is about (A) 5 % less (B) 10 % less (C) 5 % more (D) 10 % more

Last Answer : Answer: Option C

The load carrying capacity of helically reinforced column as compared to that of column with ties is about [ A ] 5% less [ B ] 5% more [ C ] 10% less [ D ] 10% more`

Description : The load carrying capacity of helically reinforced column as compared to that of column with ties is about [ A ] 5% less [ B ] 5% more [ C ] 10% less [ D ] 10% more`

Last Answer : [ B ] 5% more

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

Reduced voltage applied to a motor during the starting period will _____________. A. result in decreased acceleration time only B. lower the starting current and increase accelerating time C. cause a greater starting torque D. increase the starting current and pump capacity

Description : Reduced voltage applied to a motor during the starting period will _____________. A. result in decreased acceleration time only B. lower the starting current and increase accelerating time C. cause a greater starting torque D. increase the starting current and pump capacity

Last Answer : Answer: B

Two shafts in torsion will have equal strength if a. Only diameter of the shafts is same b. Only angle of twist of the shaft is same c. Only material of the shaft is same d. Only torque transmitting capacity of the shaft is same

Description : Two shafts in torsion will have equal strength if a. Only diameter of the shafts is same b. Only angle of twist of the shaft is same c. Only material of the shaft is same d. Only torque transmitting capacity of the shaft is same

Last Answer : d. Only torque transmitting capacity of the shaft is same

Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Description : Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Last Answer : (B) Frictional losses in the bearing

Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Description : Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Last Answer : (C) Dimensionless parameter that contains all the design parameters

of the engine Torque What ?

Last Answer : Reverse Direction From Produced Of energy Quantity Who Them Internal Angle With Multiply If you do That The value Found Will go Him Torque Says . That is Energy * Conic Distance Of ... Center To be Perpendicular Distance. Of torque Because Basically The opposite Voltage Creation Become Stays.

What is the head bolt torque setting of 8dc9 engine?

Description : What is the head bolt torque setting of 8dc9 engine?

Last Answer : Need answer

What is the culinder head torque to 4JB1 engine Isuzu.?

Description : What is the culinder head torque to 4JB1 engine Isuzu.?

Last Answer : I cannot answer this question.

In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Description : In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Last Answer : Ans :d

If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind its normal position as it rotates. This co A. hunting B. direct coupling C. peaking D. harmonic coupling

Description : If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind ... as it rotates. This co A. hunting B. direct coupling C. peaking D. harmonic coupling

Last Answer : Answer: A

If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind its normal position as it rotates. This hu A. amortisseur windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Description : If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ... windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Last Answer : Answer: A

For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (B) 2πT m