What is the head bolt torque setting of 8dc9 engine?

What is the head bolt torque setting of 8dc9 engine?
by

1 Answer

Answer :

Need answer
by

Related questions

What is the tightening of cylinder head bolt on KIA NAZA RIA 2.5L GASOLINE ENGINE?

Description : What is the tightening of cylinder head bolt on KIA NAZA RIA 2.5L GASOLINE ENGINE?

Last Answer : Need answer

If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the diameter of each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. Permissible tensile stress is 80N/mm2. a) 27mm b) 25mm c) 23mm d) 21mm

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the diameter of each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. Permissible tensile stress is 80N/mm2. a) 27mm b) 25mm c) 23mm d) 21mm

Last Answer : a) 27mm

If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the tensile force on each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. a) 51234.4N b) 45968.3N c) 41666.7N d) None of the listed

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the tensile force on each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. a) 51234.4N b) 45968.3N c) 41666.7N d) None of the listed

Last Answer : c) 41666.7N

Which of the following is not recommended by ASME B31.3 when assembling gray cast iron flanges? a) Use high strength bolting at all times. b) Carefully align the flanges. c) Carefully control bolt torque. d) Ensure piping loads transmitted to the flanges are within design conditions.

Description : Which of the following is not recommended by ASME B31.3 when assembling gray cast iron flanges? a) Use high strength bolting at all times. b) Carefully align the flanges. c) Carefully control bolt torque. d) Ensure piping loads transmitted to the flanges are within design conditions.

Last Answer : a) Use high strength bolting at all times.

What is the culinder head torque to 4JB1 engine Isuzu.?

Description : What is the culinder head torque to 4JB1 engine Isuzu.?

Last Answer : I cannot answer this question.

Shank is the portion of bolt between the head and the thread. a) True b) False

Description : Shank is the portion of bolt between the head and the thread. a) True b) False

Last Answer : a) True

Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Description : Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener

Last Answer : d) Helps in locking of the fastener

Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Description : Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these

Last Answer : (A) Length

Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Description : Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Last Answer : Option B

Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Description : Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Last Answer : Option B

what is the torque setting for front axle on 05 Ford 4x2?

Description : what is the torque setting for front axle on 05 Ford 4x2?

Last Answer : The setting would be around 7 route in order to have a correct setting of axle.

of the engine Torque What ?

Last Answer : Reverse Direction From Produced Of energy Quantity Who Them Internal Angle With Multiply If you do That The value Found Will go Him Torque Says . That is Energy * Conic Distance Of ... Center To be Perpendicular Distance. Of torque Because Basically The opposite Voltage Creation Become Stays.

How much torque and horse power does a small engine have?

Description : How much torque and horse power does a small engine have?

Last Answer : How small is a small engine? One could only guess.

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Description : When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Last Answer : If the clutch is totally worn out there is nothing left.

How much torque and horse power does a small engine have?

Description : How much torque and horse power does a small engine have?

Last Answer : How small is a small engine? One could only guess.

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Description : When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Last Answer : If the clutch is totally worn out there is nothing left.

In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Description : In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Last Answer : Ans :d

A engine will generate maximum torque when it a. runs at maximum speed b. develops maximum power c. runs at lowest speed d. consumes more fuel

Description : A engine will generate maximum torque when it a. runs at maximum speed b. develops maximum power c. runs at lowest speed d. consumes more fuel

Last Answer : ANSWER c. runs at lowest speed

If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind its normal position as it rotates. This co A. hunting B. direct coupling C. peaking D. harmonic coupling

Description : If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind ... as it rotates. This co A. hunting B. direct coupling C. peaking D. harmonic coupling

Last Answer : Answer: A

If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ahead or behind its normal position as it rotates. This hu A. amortisseur windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Description : If the driving torque, such as that produced by a diesel engine, creates pulsations when coupled with a synchronous generator operating in parallel; the generator rotor may be periodically pulled ... windings B. direct coupling C. increase governor speed droop D. decreasing governor speed droop

Last Answer : Answer: A

For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (B) 2πT m

For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (D) 4πT m

The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Description : The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Last Answer : d) All of the above.

Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Last Answer : (B) Maximum brake horse power output

Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

Description : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

Last Answer : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

What are the torque settings for Kia 2700 cylinder head and tappet clearance?

Description : What are the torque settings for Kia 2700 cylinder head and tappet clearance?

Last Answer : Feel Free to Answer

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

What the difference between each bolt action rifles?

Description : What the difference between each bolt action rifles?

Last Answer : Here is a great Youtube Channel, that should answer your questions: https://www.youtube.com/user/ForgottenWeapons

Will it be Usain Bolt or Justin Gatlin in 100 m?

Description : Will it be Usain Bolt or Justin Gatlin in 100 m?

Last Answer : To think it will be anyone other than Sir Bolt is utter Usanity! ;-o

Hypothetical: Trump either is disowned by the Republican party, or he decides to bolt and run independently. Does this ensure a victory for the democrats?

Description : Hypothetical: Trump either is disowned by the Republican party, or he decides to bolt and run independently. Does this ensure a victory for the democrats?

Last Answer : Victory for the democrats was ensured a long time ago. Probably around the time that we knew the full slate of Republican hopefuls. There isn’t one who could win against either Clinton or Sanders.

I need to utilize a "Social Networking" bolt on solution...

Description : I need to utilize a "Social Networking" bolt on solution...

Last Answer : answer:You would go to an SEO marketing group. this San Diego based group does a fine job. They are called SEO HAUS. They are going forward and passing up SEO into the next generation of ... Twitter, Tumblr, YouTube Account etc and have you firing on all cylinders in a subtle and consistent manner!

What's up with people calling Usain Bolt cocky? Are they just haters?

Description : What's up with people calling Usain Bolt cocky? Are they just haters?

Last Answer : Do you have an example? Supreme self confidence is always required to achieve such a level of competence.

Epoxy or superglue? What's works best to attach a metal bolt sleeve to a chair?

Description : Epoxy or superglue? What's works best to attach a metal bolt sleeve to a chair?

Last Answer : I’d use 5-minute epoxy. It will fill gaps better than superglue, if the fit is less than perfect, and be less brittle once it sets. I recommend the 5-minute stuff, because the slower setting epoxies can have time to soak into the wood grain before setting.

Do you bolt, warn, or hope they're deep sleepers? (A question about flatulance and intimate nights.)

Description : Do you bolt, warn, or hope they're deep sleepers? (A question about flatulance and intimate nights.)

Last Answer : slarting, love it….you know, I don’t really know…I generally don’t care about those kinds of things…and I’m pretty sure they won’t either, after a night with me :)~

What is the best way to remove a crankshaft bolt on a 88 Acura Legend?

Description : What is the best way to remove a crankshaft bolt on a 88 Acura Legend?

Last Answer : answer:I guess you’ve seen this then?? Other than this I’m no help at all sorry…... I’m with you anyway, get some fresh arms on the job…....

How many electron volts power the release of a large lightning bolt?

Description : How many electron volts power the release of a large lightning bolt?

Last Answer : answer:Are electron volts the same as volts? I’ve had this question before too and it causes me to appreciate the forces of nature. It must take millions of volts to create an arc from clouds thousands of feet in the air to earth, given the resistance of air.

New found powers after being zapped by bolt of lightning, how would you use them?

Description : New found powers after being zapped by bolt of lightning, how would you use them?

Last Answer : Sell my ability as an alternative energy source. Retire wealthy and pay my kids’ tuition.

Lost a bolt that connects a cable on my bike and need advice...

Description : Lost a bolt that connects a cable on my bike and need advice...

Last Answer : I would hacksaw the bolt until it is the right length, and then use it.

What is the metric equivalent for a machine bolt rated an S.A.E grade 8?

Description : What is the metric equivalent for a machine bolt rated an S.A.E grade 8?

Last Answer : A grade 8 SAE is equivalent to a metric grade 10.9 according to this chart

How can I remove a pedal from my bike when the bolt is stripped?

Description : How can I remove a pedal from my bike when the bolt is stripped?

Last Answer : Are you aware that the left pedal is threaded in the opposite direction, and loosens by turning clockwise?

Why do plants bolt? -Biology

Description : Why do plants bolt? -Biology

Last Answer : answer:

Usain Bolt Running Speed Per In seconds How much ?

Last Answer : her Speed 9 Seconds A. 100 Meters

Holds the wheel without one bolt?

Description : Can I get to the service station if I miss one screw on my bike?

Last Answer : Well, if it's not too far and you take a step.

how do you measure bolt circle on 5 bolt tire rim

Description : how do you measure bolt circle on 5 bolt tire rim

Last Answer : Need Answer

how do I protect my door moldings from accidental dead bolt extention

Description : how do I protect my door moldings from accidental dead bolt extention

Last Answer : Need Answer

What vehicles have a 6x4.75 bolt pattern?

Description : What vehicles have a 6x4.75 bolt pattern?

Last Answer : There is none to my knowledge.

What causes the explosive release of energy in a lightning bolt?

Description : What causes the explosive release of energy in a lightning bolt?

Last Answer : Need answer

Will a1995 2.2 Chevy transmission bolt up to a LS1?

Description : Will a1995 2.2 Chevy transmission bolt up to a LS1?

Last Answer : It might, but the torque from the LS1 will destroy thattransmission.

What is the Value of browning 280 A Bolt?

Description : What is the Value of browning 280 A Bolt?

Last Answer : Need more specifics