138 views

1 Answer

Answer :

A.C. series motor as compared to D.C. series motor has smaller brush width, less number of field turns, more number of armature turns, less air gap.

Like 0 like

Please log in or register to answer this question.

Related questions

96 views

Last Answer : If a D.C. series motor is operated on A.C. supply, it will spark excessively, have poor efficiency, have poor power factor.

1 answer
413 views

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

1 answer
165 views

Last Answer : In a A.C. series motor armature coils are usually connected to commutator through resistance.

1 answer
146 views

Description : Describe the reason of using dc series motor for electric trains.

Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

1 answer
123 views

Description : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :

Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

1 answer
522 views

Last Answer : In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

1 answer
120 views

Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

1 answer
86 views

Last Answer : A D.C. series motor is that which has its field winding consisting of thick wire and less turns.

1 answer
191 views

Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

1 answer
147 views

Last Answer : In A.C. series motor compensating winding is employed to reduce sparking at the brushes.

1 answer
111 views

Last Answer : If a D.C. motor is connected across the A.C. supply it will burn due to heat produced in the field winding by eddy currents.

1 answer
102 views

Last Answer : Induction motor is a AC motor it is also known as asynchronous motor .

1 answer
330 views

Description : Brake test on DC series motor

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

2 answers
122 views

Last Answer : When a D.C. series motor is connected to A.C. supply, the power factor will be low because of high inductance of field and armature circuits.

1 answer
93 views

Description : What are the advantages of DC series motor?

0 answers
635 views

Description : Why dc series motor should not be started at no load?

0 answers
87 views

Description : Why a dc series motor has a high starting torque?

Last Answer : motor

1 answer
755 views

Description : In an AC. circuit, a low value of kVAR compared with kW indicates?

Last Answer : In an AC. circuit, a low value of kVAR compared with kW indicates high power factor.

1 answer
98 views

Description : In case of conductively compensated D.C. series motors, the compensating winding is provided?

Last Answer : In case of conductively compensated D.C. series motors, the compensating winding is provided in series with armature winding.

1 answer
388 views

Last Answer : When two D.C. series motors are connected in parallel, the resultant speed is normal speed.

1 answer
61 views

Description : What are the parts of AC motor?

0 answers
69 views

Description : What is the principle of AC motor?

0 answers
106 views

Description : AC motor

Last Answer : AC motor AC motor have two types one is Induction motor and second is synchronous motor. Induction motor have two types one is single phase induction motor and second is three phase ... self starting motor so using  external motor or we have to start it as induction motor.

1 answer
147 views

Description : Write two applications of D.C. series motor. 

Last Answer : The applications of D.C. series motor: 1. Cranes 2. Hoists 3. Trolley and cars 4. Conveyors 5. For traction work i.e. electric locomotives 6. Elevator 7. Air compressor

1 answer
498 views

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

1 answer
358 views

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

1 answer
2.5k views

Description : The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking

Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

1 answer
102 views

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

1 answer
170 views

Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

1 answer
424 views

Description : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

1 answer
134 views

Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

1 answer
233 views

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

1 answer
137 views

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

1 answer
192 views

Description : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

1 answer
96 views

Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

1 answer
221 views

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

1 answer
144 views

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

1 answer
97 views

Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

1 answer
357 views

Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

1 answer
164 views

Last Answer : Sparking, is discouraged in a D.C. motor because commutator gets damaged.

1 answer
128 views

Last Answer : D.C. Series motor is generally preferred for cranes and hoists.

1 answer
116 views

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

1 answer
241 views

Last Answer : Sparking at the commutator of a D.C. motor may result in damage to commutator segments, damage to commutator insulation, increased power consumption.

1 answer
126 views

Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

1 answer
185 views

Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

1 answer
81 views

Last Answer : Differentially compounded D.C. motor has got maximum self loading property.

1 answer
589 views

Last Answer : The current drawn by the armature of D.C. motor is directly proportional to the torque required.

1 answer
169 views

Last Answer : The starting resistance of a D.C. motor is generally low.

1 answer
181 views

Last Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

1 answer
255 views

Last Answer : By looking at Commutator part of the motor, it can be easily confirmed that a particular motor is D.C. motor.

1 answer
...