What are the substances that has low specific heat capacity?

What are the substances that has low specific heat capacity?
by

1 Answer

Answer :

Need answer
by

Related questions

What substances have the lowest heat capacity?

Description : What substances have the lowest heat capacity?

Last Answer : Need answer

The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Description : The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion

Last Answer : ANSWER: B

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : (3) high specific heat capacity Explanation: Water is used in car radiators because the Specific heat capacity of water is high as a result of which it takes away the heat from engine better compared to ... coolant used in the radiator. If the radiator was to overheat the car would come to a stop.

Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : high specific heat capacity

The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Description : The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : it reflects most of the heat from the sun

What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Description : What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Last Answer : Sensible heat

Substances whose specific resistance abruptly decreases at very low temperature are called

Last Answer : Substances whose specific resistance abruptly decreases at very low temperature are called superconductors.

What unit is used to measure energy when calculating specific heat capacity?

Description : What unit is used to measure energy when calculating specific heat capacity?

Last Answer : joules

In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Description : In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Last Answer : Assuming that the full question, which the questioner failed to post, is given in the Discussion, below.Taking the specific heat capacity of water as 4.2 Joules per gram per degree C, the metal has a specific heat capacity as approx 0.68 Joules/(g °C).

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Heat given to a body which raises its temperature by 1°C is known as - (1) water equivalent (2) thermal capacity (3) specific heat (4) temperature gradient

Description : Heat given to a body which raises its temperature by 1°C is known as - (1) water equivalent (2) thermal capacity (3) specific heat (4) temperature gradient

Last Answer : (2) thermal capacity Explanation: Heat capacity or thermal capacity is a measurable physical quantity equal to the ratio of the heat added to (or removed from) an object to the resulting temperature change.

Which of the following has the maximum specific heat capacity? (1) water (2) piece of iron (3) piece of gold (4) chloroform

Description : Which of the following has the maximum specific heat capacity? (1) water (2) piece of iron (3) piece of gold (4) chloroform

Last Answer : (1) water Explanation: The quantity of heat required to raise the temperature of a substance by one degree Celsius is called its specific heat capacity.

What is the difference between heat capacity and specific heat of a material ?

Description : What is the difference between heat capacity and specific heat of a material ?

Last Answer : The heat capacity of a material is the amount of heat transformed to raise unit mass of a material 1 degree in temperature. The specific heat of a material is the ratio of ... specified temperature. For most engineering purposes, heat capacities may be assumed numerically equal to;specific heats.

The matter having highest specific heat . capacity?

Description : The matter having highest specific heat . capacity?

Last Answer : Water

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Description : Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Last Answer : (A) Heat capacity

Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Description : Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Last Answer : kJ / kg.k

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Description : What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Last Answer : J/kg °C

What is the specific heat capacity of water in J/kg °C? ∙  A. 4581  B. 4185  C. 4518  D. 4815

Description : What is the specific heat capacity of water in J/kg °C? ∙  A. 4581  B. 4185  C. 4518  D. 4815

Last Answer : 4185

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Specific heat

What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one mole of substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Molar heat

What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K?  A. Heat capacity  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Heat capacity

Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Description : Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Last Answer : Answer : b

The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Description : The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Last Answer : specific heat specific heat is the quantity of heat required to raise the temperature of 1 gram substance by 1 oC is

Define the following: i) Melting point i) Specific heat iii) Heat capacity iv) Dielectric constant.

Description : Define the following: i) Melting point i) Specific heat iii) Heat capacity iv) Dielectric constant.

Last Answer : Definition: i) Melting point - The melting point of a material is the temperature at which it changes state from solid to liquid at normal atmospheric pressure. The temperature at which a solid ... It is an amount measuring the ability of a material to store electrical in an electric field.

Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer :  steam has latent heat of vaporisation

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Global agreement in specific control strategies to reduce the release of ozone depleting substances was adopted by:

Description : Global agreement in specific control strategies to reduce the release of ozone depleting substances was adopted by:

Last Answer : Global agreement in specific control strategies to reduce the release of ozone depleting substances was ... C. Kyoto protocol D. Montreal protocol.

In multicellular animals, a group of similar cells along with intercellular substances perform a specific function. Such an organisation is called

Description : In multicellular animals, a group of similar cells along with intercellular substances perform a specific function. Such an organisation is called

Last Answer : In multicellular animals, a group of similar cells along with intercellular substances perform a specific ... B. Orgen C. Body D. Orgen system

Global agreement in specific control strategies to reduce the release of ozone depleting substances was adopted by:

Description : Global agreement in specific control strategies to reduce the release of ozone depleting substances was adopted by:

Last Answer : Global agreement in specific control strategies to reduce the release of ozone depleting substances ... The Montreal Protocol D. The Koyoto Protocol

Which one of the following correctly explains the function of a specific part of the human nephron? (a) Podocytes : create minute spaces (slit pores) for the filtration of blood into the Bowman’s capsule (b) Henle’s loop : most reabsorption of the major substances from the glomerular filtrate (c) Distal convoluted tubule : reabsorption of K+ ions into the surrounding blood capillaries (d) Afferent arteriole : carries the blood away from the glomerulus towards renal vein.

Description : Which one of the following correctly explains the function of a specific part of the human nephron? (a) Podocytes : create minute spaces (slit pores) for the filtration of blood into the ... blood capillaries (d) Afferent arteriole : carries the blood away from the glomerulus towards renal vein.

Last Answer : (a) Podocytes : create minute spaces (slit pores) for the filtration of blood into the Bowman’s capsule

Which one of the following best defines the word “allotropes”? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between those of metals and nonmetals D Atoms of a given atomic number that have a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Description : Which one of the following best defines the word allotropes ? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between ... a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Last Answer : A Different structural forms of an element 

Which solid material has a high heat capacity but low thermal conductivity?

Description : Which solid material has a high heat capacity but low thermal conductivity?

Last Answer : https://en.wikipedia.org/wiki/Thermal_barrier_coating

Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Description : Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Last Answer : (A) Abundance & high heat capacity

The third law of thermodynamics states that the (A) Heat capacity of a crystalline solid is zero at absolute zero temperature (B) Heat transfer from low temperature to high temperature source is not possible without external work (C) Gases having same reduced properties behaves similarly (D) None of these

Description : The third law of thermodynamics states that the (A) Heat capacity of a crystalline solid is zero at absolute zero temperature (B) Heat transfer from low temperature to high temperature source is ... without external work (C) Gases having same reduced properties behaves similarly (D) None of these

Last Answer : (A) Heat capacity of a crystalline solid is zero at absolute zero temperature

ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Description : ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Last Answer : Option D

What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Last Answer : c. Formation of bubbles

Which one among the following substances evolved heat when dissolved in water? (1) Glucose (2) Fructose (3) Quick lime (4) Salt peter

Description : Which one among the following substances evolved heat when dissolved in water? (1) Glucose (2) Fructose (3) Quick lime (4) Salt peter

Last Answer : (3) Quick lime Explanation: Quicklime is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. When limestone is heated, at about 1000° C it undergoes thermal decomposition.

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Description : Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Last Answer : (C) Water