Water is normally used as a coolant in the heat exchange equipments mainly because of its (A) Abundance & high heat capacity (B) Low density (C) Low viscosity (D) High fluidity

Water is normally used as a coolant in the heat exchange equipments
mainly because of its
(A) Abundance & high heat capacity
(B) Low density
(C) Low viscosity
(D) High fluidity
by

1 Answer

Answer :

(A) Abundance & high heat capacity
by

Related questions

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Last Answer : (D) All a, b & c

Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Description : Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Last Answer : (A) Less changes in fluidity of oil with temperature

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Description : The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________ of the slag. (A) Fluidity (B) Basicity (C) Acidity (D) Viscosity

Last Answer : Option A

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Which one of the following is correct? [IES-2008] A hydrodynamic slider bearing develops load bearing capacity mainly because of- (a) Slider velocity (b) wedge shaped oil film (c) Oil compressibility (d) oil viscosity

Description : Which one of the following is correct? [IES-2008] A hydrodynamic slider bearing develops load bearing capacity mainly because of- (a) Slider velocity (b) wedge shaped oil film (c) Oil compressibility (d) oil viscosity

Last Answer : (b) wedge shaped oil film

Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Description : Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Last Answer : (A) The heat transfer rate is low in view of the large temperature drop

Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its – (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : (3) high specific heat capacity Explanation: Water is used in car radiators because the Specific heat capacity of water is high as a result of which it takes away the heat from engine better compared to ... coolant used in the radiator. If the radiator was to overheat the car would come to a stop.

Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Description : Water is used in car radiator because of its (1) low density (2) easy availability (3) high specific heat capacity (4) low boiling point

Last Answer : high specific heat capacity

H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Description : H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Last Answer : (B) Higher specific heat

Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate (C) Has a better heat transfer characteristics, and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Description : Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate ... , and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Description : Which of the following parameters of the fluid is not very important, while deciding its route in a shell and tube heat exchanger? (A) Corrosiveness & fouling characteristics (B) Pressure (C) Viscosity (D) Density

Last Answer : (D) Density

Minimum possible diameter of a packed column is decided mainly bythe(A) Flooding(B) Gas viscosity(C) Liquid density(D) Liquid hold up

Description : Minimum possible diameter of a packed column is decided mainly bythe (A) Flooding (B) Gas viscosity (C) Liquid density (D) Liquid hold up

Last Answer : (A) Flooding

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

On which of the following variables heat convected depends ? (a) Power density (b) Temperature difference between heated surface and coolant (c) Thermal resistivity, density, specific heat (d) Gravitational constant (e) All ofthe above

Description : On which of the following variables heat convected depends ? (a) Power density (b) Temperature difference between heated surface and coolant (c) Thermal resistivity, density, specific heat (d) Gravitational constant (e) All ofthe above

Last Answer : (e) All ofthe above

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

Only small amount of evaporation of water produces large cooling effects because of its (A) Large latent heat (B) Low viscosity (C) Small latent heat (D) None of these

Description : Only small amount of evaporation of water produces large cooling effects because of its (A) Large latent heat (B) Low viscosity (C) Small latent heat (D) None of these

Last Answer : (A) Large latent heat

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Description : Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Last Answer : Option D

Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Description : Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Last Answer : (A) Prandtl number

Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Description : Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Last Answer : (A) Fluidity

Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Description : Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Last Answer : (B) Increases the formation of graphite

CMOS circuits are extensively used for ON-chip computers mainly because of their extremely (A) low power dissipation. (B) high noise immunity. (C) large packing density. (D) low cost.

Description : CMOS circuits are extensively used for ON-chip computers mainly because of their extremely (A) low power dissipation. (B) high noise immunity. (C) large packing density. (D) low cost.

Last Answer : Ans: C Because CMOS circuits have large packing density.

The abundance of a species population, within its habitat, is called (a) relative density (b) regional density (c) absolute density (d) niche density.

Description : The abundance of a species population, within its habitat, is called (a) relative density (b) regional density (c) absolute density (d) niche density.

Last Answer : (d) niche density.

The abundance of a species population, within its habitat, is called (a) relative density (b) regional density (c) absolute density (d) niche density.

Description : The abundance of a species population, within its habitat, is called (a) relative density (b) regional density (c) absolute density (d) niche density.

Last Answer : (d) niche density.

Clouds float in the atmosphere because of their – (1) low pressure (2) low density (3) low viscosity (4) low temperature

Description : Clouds float in the atmosphere because of their – (1) low pressure (2) low density (3) low viscosity (4) low temperature

Last Answer : (2) low density Explanation: The key to why clouds float is that the density of the same volume of cloud material is less than the density of the same amount of dry air. Just as oil floats on water ... it is less dense, clouds float on air because the moist air in clouds is less dense than dry air.

Clouds float in the atmosphere because of their (1) low pressure (2) low density (3) low viscosity (4) low temperature

Description : Clouds float in the atmosphere because of their (1) low pressure (2) low density (3) low viscosity (4) low temperature

Last Answer : low density

If relative frequency, abundance and density values are 6, 5 and 4, respec tively, then summed dominance ratio is a). 15 b). 5 c). 7.5 d). 3

Description : If relative frequency, abundance and density values are 6, 5 and 4, respec tively, then summed dominance ratio is a). 15 b). 5 c). 7.5 d). 3

Last Answer : b). 5

Which of the following is not an intensive property? (A) Molar heat capacity (B) Internal energy (C) Viscosity (D) None of these

Description : Which of the following is not an intensive property? (A) Molar heat capacity (B) Internal energy (C) Viscosity (D) None of these

Last Answer : (B) Internal energy

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Mercury is an ideal barometric fluid mainly due to its(A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Description : Mercury is an ideal barometric fluid mainly due to its (A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Last Answer : (D) Very low vapor pressure

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Last Answer : Option D

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture