Description : Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these
Last Answer : Option B
Description : Which of the following fastening devices has its both ends threaded? (A) Bolt (B) Stud (C) Set screw (D) Split nut
Last Answer : (B) Stud
Description : Which of the following is not a function of washer? a) Distributes load over a large area of clamped parts b) Provides bearing surface over large clearance bolts c) Prevents marring of the bolt head and nut surface d) Helps in locking of the fastener
Last Answer : d) Helps in locking of the fastener
Description : The most important function of a washer is to provide bearing area and washers are normally specified by their hole diameters. The diameter of washer as compared to the nut is (A) More (B) Less (C) Same (D) More but less than the diameter of bolt
Last Answer : (A) More
Description : The bolt is subjected to __________ when the nut is tightened by putting the washer beneath it. (A) Tension (B) Shear (C) Compression (D) Bending & tension
Last Answer : Option A
Description : I forgot to put water in pressure cooker while cooking , do u have the part that i need to replace It is some kind of nut n bolt near to the wishtle?
Last Answer : Check with Sears parts and Repair in your local area. If they dont have it thet can order it for you. Just check for your model number at the bottom of your pressure cooker.. Check with Sears parts ... can order it for you. Just check for your model number at the bottom of your pressure cooker..
Description : In nut and bolt fastener, nut is generally held stationary while bolt is rotated. a) True b) False
Last Answer : b) False
Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer
Last Answer : (B) Making shank diameter equal to core diameter of threads
Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew
Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface
Description : When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress
Last Answer : (A) Direct shear stress
Description : When the shear strength of nut is equal to the tensile strength of bolt, the height of nut (h) should be (A) h = 0.5 dc (B) h = 0.25 dc (C) h = 0.75 dc (D) h = dc
Last Answer : (A) h = 0.5 dc
Description : When the shear strength of nut is half the tensile strength of bolt, the height of nut (h) should be (A) h = 0.5 dc (B) h = 0.25 dc (C) h = 0.75 dc (D) h = dc
Last Answer : (B) h = 0.25 dc
Description : When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress
Last Answer : (C) Tensile stress
Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew
Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut
Description : Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the ... fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps
Last Answer : (D) The water seal is less than that of ordinary traps
Description : Which of the motors for the devices listed below is fitted with an instantaneous overload relay? A. Fan B. Pump C. Winch D. Machine tool
Last Answer : Answer: C
Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Whitcome Judson in 1891 invented what for fastening shoes?
Last Answer : Zip Fastener
Description : what is a fastening?
Last Answer : The answer is rivet.
Description : What is the fastening method of your foot?
Last Answer : Need answer
Description : Cotter joint is a permanent fastening. a) true b) false
Last Answer : b) false
Description : Whitcome Judson in 1891 invented what for fastening shoes
Description : Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc
Last Answer : C) Resistance
Description : Bones of pelvic girdle forms a cavity in which head of the femur is fitted are
Last Answer : Bones of pelvic girdle forms a cavity in which head of the femur is fitted are A. Ilium only B. ... C. Ilium,ischium, and pubis D. Ischium and pubis
Description : What is the head bolt torque setting of 8dc9 engine?
Description : What is the tightening of cylinder head bolt on KIA NAZA RIA 2.5L GASOLINE ENGINE?
Description : Shank is the portion of bolt between the head and the thread. a) True b) False
Last Answer : a) True
Description : Resilience of a bolt can be increased by increasing its (A) Length (B) Shank diameter (C) Head diameter (D) None of these
Last Answer : (A) Length
Description : The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose
Last Answer : Ans:(c)
Description : The freezer in a refrigerator is fitted near the top – (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption
Last Answer : (3) it facilitates convection currents Explanation: The freezer in a refrigerator is fitted near the top so that it can cool the whole interior by setting up ... compartment temperature excessively causes difficulties in maintaining above-reezing temperature in the refrigerator compartment.
Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)
Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)
Description : The freezer in a refrigerator is fitted near the top (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption
Last Answer : it facilitates convection currents
Description : Antisyphonage pipe is fitted A. At the end of septic tanks B. On manholes C. With a W.C. trap D. At the beginning of sewer line
Last Answer : ANS: C
Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end
Last Answer : (C) Varies exponentially, being more near the torque-input end
Description : At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above
Last Answer : (D) All the above
Description : is essential to counter act the end thrust of gang due to soil thrust.. A) Spool. C ) Gang B) Bearing. D) Gang bolt
Last Answer : Bearing
Description : Can you help me figure out a way to organize my stud earrings?
Last Answer : How about getting a jewelry roll? I use one of them for my earrings and rings and works nicely. You can hide it into a drawer and the jewelry stay well organized. If you can’t afford to buy one and you are good with handcrafting, you can make one yourself, they are pretty easy to make.
Description : What is the purpose of a wood stud mounting for a TV bracket?
Last Answer : I would imagine its for the security of your screen. Plastic would not be strong enough, so wood it is. Also, you may have to install the mounting directly into the wood studs in your walls. It all depends on the weight of your screen.
Description : How did standard 2x4 wall stud length become eight feet?
Last Answer : answer:Fascinating question! I've taken a couple of building inspection classes and we went over all the minutiae of what the measurements were, but very little on why they were that way. Of course, the ... of most common 48 sheet goods. No one seems to have settled on a correct answer, though!
Description : What would it take for you to be a total slut or a total stud?
Last Answer : I have been told a few times that I am already a total slut, so apparently all I need to do is live my life. oh well, slut I shall be, not changing for anyone, I don’t have a problem w/how I live my life.
Description : How do I remove my nose stud?
Last Answer : Grab & pull…
Description : What do I charge a person who wants to use my cat for stud services?
Last Answer : Typically, purebred breeders take “pick of the litter” as stud fee.
Description : Is getting nose stud better than getting a nose ring?
Last Answer : If it is your very first piercing, then the short answer is yes, a stud would be a better choice. That is because the hoop would cause the piercing to heal with a small curvature, so a stud would be better in the long run
Description : Who is the best seller of statement stud earrings online?
Last Answer : the best online websites to do shopping-related statement stud earning on online are like Nykaa, amazon, and myntra websites. these websites stand the best rather than other websites because they will provide the best design varieties and best-rated earrings.
Description : Who is the best seller of traditional stud earrings?
Last Answer : the best seller of traditional stud earrings is Amazon, Flipkart, myntra, and Nykaa because these websites will provide the latest, attractive, and best-rated earrings.
Description : What kind of backing does 1/2 Carat Diamond Stud 14K Gold Earrings have?
Last Answer : The 1/2 Carat Diamond Stud 14K Gold Earrings have standard screw backings. This will keep them secure and reduce the risk of losing them.
Description : How large is the diamond in 10k Gold Diamond Accent Stud Earrings?
Last Answer : The diamonds in the 10k Gold Diamond Accent Stud Earrings are rated at 1/5 cttw, J-K Color, and I2-I3 Clarity.
Description : Do you need to find a stud to use a Tv mount?
Last Answer : you need to use a stud to firm the grip between tv and the mount
Description : Can I use an eyebrow stud as an ear stud?
Last Answer : No they are not made the same.
Description : Should I sleep in stud earrings to keep my pierced ears healthy?
Last Answer : Newly pierced earrings should have studs in them,for awhile at least