Please Log in or Register for more.


503 views

1 Answer

Answer :

In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

Like 0 like

Please log in or register to answer this question.

Related Questions


In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :
Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

Show More

109 views 1 answer







Describe the reason of using dc series motor for electric trains.
Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

Show More

142 views 1 answer








Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

Show More

114 views 1 answer








Last Answer : A D.C. series motor is that which has its field winding consisting of thick wire and less turns.

Show More

82 views 1 answer








Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

Show More

184 views 1 answer








Last Answer : A.C. series motor as compared to D.C. series motor has smaller brush width, less number of field turns, more number of armature turns, less air gap.

Show More

135 views 1 answer








Last Answer : If a D.C. series motor is operated on A.C. supply, it will spark excessively, have poor efficiency, have poor power factor.

Show More

91 views 1 answer







Why a dc series motor has a high starting torque?
Last Answer : motor

Show More

86 views 1 answer







State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.
Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Show More

380 views 1 answer







Brake test on DC series motor
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Show More

298 views 2 answers








Last Answer : When a D.C. series motor is connected to A.C. supply, the power factor will be low because of high inductance of field and armature circuits.

Show More

119 views 1 answer







What are the advantages of DC series motor?

Show More

92 views 0 answers







Why dc series motor should not be started at no load?

Show More

629 views 0 answers








Last Answer : In a A.C. series motor armature coils are usually connected to commutator through resistance.

Show More

161 views 1 answer








Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

Show More

210 views 1 answer







A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is
Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

Show More

329 views 1 answer








Last Answer : The current drawn by the armature of D.C. motor is directly proportional to the torque required.

Show More

582 views 1 answer








Last Answer : In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be more than full-load current.

Show More

366 views 1 answer








Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

Show More

91 views 1 answer







Armature control of DC motor
Last Answer : Armature control of DC motor

Show More

162 views 2 answers








Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

Show More

228 views 1 answer







In case of conductively compensated D.C. series motors, the compensating winding is provided?
Last Answer : In case of conductively compensated D.C. series motors, the compensating winding is provided in series with armature winding.

Show More

97 views 1 answer








Last Answer : When two D.C. series motors are connected in parallel, the resultant speed is normal speed.

Show More

378 views 1 answer







Write two applications of D.C. series motor. 
Last Answer : The applications of D.C. series motor: 1. Cranes 2. Hoists 3. Trolley and cars 4. Conveyors 5. For traction work i.e. electric locomotives 6. Elevator 7. Air compressor

Show More

117 views 1 answer








Last Answer : In A.C. series motor compensating winding is employed to reduce sparking at the brushes.

Show More

145 views 1 answer







The normal value of the armature resistance of a d.c. motor is?
Last Answer : The normal value of the armature resistance of a d.c. motor is 0.5.

Show More

2.9k views 1 answer








Last Answer : When the armature of a D.C. motor rotates, e.m.f. induced is back e.m.f.

Show More

203 views 1 answer







A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be
Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

Show More

481 views 1 answer







The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking
Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

Show More

2.5k views 1 answer








Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

Show More

97 views 1 answer








Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

Show More

168 views 1 answer







The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above
Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Show More

388 views 1 answer








Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

Show More

130 views 1 answer








Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

Show More

134 views 1 answer







As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?
Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

Show More

187 views 1 answer








Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

Show More

142 views 1 answer








Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

Show More

94 views 1 answer








Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

Show More

352 views 1 answer








Last Answer : Sparking, is discouraged in a D.C. motor because commutator gets damaged.

Show More

159 views 1 answer








Last Answer : D.C. Series motor is generally preferred for cranes and hoists.

Show More

120 views 1 answer








Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

Show More

107 views 1 answer








Last Answer : Sparking at the commutator of a D.C. motor may result in damage to commutator segments, damage to commutator insulation, increased power consumption.

Show More

228 views 1 answer








Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

Show More

122 views 1 answer








Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

Show More

175 views 1 answer








Last Answer : Differentially compounded D.C. motor has got maximum self loading property.

Show More

77 views 1 answer








Last Answer : The starting resistance of a D.C. motor is generally low.

Show More

169 views 1 answer








Last Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

Show More

177 views 1 answer








Last Answer : By looking at Commutator part of the motor, it can be easily confirmed that a particular motor is D.C. motor.

Show More

244 views 1 answer








Last Answer : The armature may burn if the back e.m.f. of a D.C. motor vanishes suddenly.

Show More

423 views 1 answer








Last Answer : In a D.C. shunt motor, speed is independent of armature current.

Show More

87 views 1 answer






Show More⇦ PreviousNext ⇨