What is gcf of 440 and 560?

What is gcf of 440 and 560?
by

1 Answer

Answer :

gcf(440, 560) = 40Using prime factorisation:440 = 2³ x 5 x 11560 = 2⁴ x 5 x 7hcf = 2³ x 5 = 40
by

Related questions

What a factory processes 1,560 ounces of olive oil per hour. The oil is packaged into 24-ounce bottles. How many bottles does the factory fill in one hour?

Description : What a factory processes 1,560 ounces of olive oil per hour. The oil is packaged into 24-ounce bottles. How many bottles does the factory fill in one hour?

Last Answer : Nevermind

How much is the difference between a GTX 560 and a GT 1030?

Description : ?

Last Answer : More in price than speed. I think it’s even easier to use the older 560 in this category. Due to the different developments of the larger ones, it is worth choosing the new one if you have the money. I am thinking here of graphic improvements.

If there are 560 calories 8 ounces of meat how many calories are in 3 ounces of meat?

Description : If there are 560 calories 8 ounces of meat how many calories are in 3 ounces of meat?

Last Answer : 3

What is three eighth of 560?

Description : What is three eighth of 560?

Last Answer : 3/8 of 560 = 210

Where do i find the interior color code for the Mercedes 560 sl?

Description : Where do i find the interior color code for the Mercedes 560 sl?

Last Answer : Need answer

How long is a typical radio wave which has a frequency of 560 kilometers?

Description : How long is a typical radio wave which has a frequency of 560 kilometers?

Last Answer : Need answer

How many moles of iodine are produced from 560 g of magnesium iodide?

Description : How many moles of iodine are produced from 560 g of magnesium iodide?

Last Answer : not sure

On a PC, how much memory is available to application software? A) 1024 KB B) 760 KB C) 640 KB D) 560 KB

Description : On a PC, how much memory is available to application software? A) 1024 KB B) 760 KB C) 640 KB D) 560 KB

Last Answer : Answer : C

Renal plasma flow of an average adult man is (A) 120–130 ml/minute (B) 325–350 ml/minute (C) 480–52 ml/minute (D) 560–830 ml/minute

Description : Renal plasma flow of an average adult man is (A) 120–130 ml/minute (B) 325–350 ml/minute (C) 480–52 ml/minute (D) 560–830 ml/minute

Last Answer : Answer : D

A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation was begun immediately and continued until arrival in Casualty where an endotracheal tube was inserted and ventilation was maintained on 100% oxygen. Investigations revealed: pH 7.13 PaO2 560 mmHg PaCO2 18 mmHg Bicarbonate 5.8 SaO2 98% Based on these laboratory values, which of the following statements best describes his current pathophysiology? 1) He is demonstrating a primary respiratory alkalosis 2) He probably developed a large right to left intracardiac shunt 3) His anion gap is probably normal 4) His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Description : A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation ... His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Last Answer : Answers-5 This young patient with severe central chest pain has probably arrested due to myocardial infarction and arrhythmia. His gases reveal high PO2 following 100% O2 but severe acidosis ... no left to right shunting and high pulmonary pressures would be expected after this arrest scenario.

When a voltage of 132 VDC is applied to the illustrated circuit with a resistance of 470 ohms the current will be ________. EL-0018 A. 0.280 amps B. 3.560 amps C. 602 milliamps D. 1.673 amps

Description : When a voltage of 132 VDC is applied to the illustrated circuit with a resistance of 470 ohms the current will be ________. EL-0018 A. 0.280 amps B. 3.560 amps C. 602 milliamps D. 1.673 amps

Last Answer : Answer: A

In t-carrier system, t3 has a bit rate of A. 560.160 Mbps B. 44.376 Mbps C. 44.736 Mbps D. 560.106 Mbps

Description : In t-carrier system, t3 has a bit rate of A. 560.160 Mbps B. 44.376 Mbps C. 44.736 Mbps D. 560.106 Mbps

Last Answer : C. 44.736 Mbps

From1961-1964 John fairclough’s research played an important role to pursue full range of compatible computers as system: a. System/360 b System/460 c. System/560 d. System/780

Description : From1961-1964 John fairclough’s research played an important role to pursue full range of compatible computers as system: a. System/360 b System/460 c. System/560 d. System/780

Last Answer : a. System/360

Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is (A) 104.0 m (B) 104.5 m (C) 105.0 m (D) 105.5 m

Description : Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is (A) 104.0 m (B) 104.5 m (C) 105.0 m (D) 105.5 m

Last Answer : (B) 104.5 m

What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Last Answer : b. 120-160 bar

Cooling Towers vary from size of 40 metres to a) 400 b) 120 c) 450 d) 560

Description : Cooling Towers vary from size of 40 metres to a) 400 b) 120 c) 450 d) 560

Last Answer : a) 400

What is the force required to accelerate amass of 30kg at a rate of 15m/s².  a. 460 N  b. 380 N  c. 560 N  d. 450 N F = ma

Description : What is the force required to accelerate amass of 30kg at a rate of 15m/s².  a. 460 N  b. 380 N  c. 560 N  d. 450 N F = ma

Last Answer : 450 N

A train travelling at 36 kmph completely crosses another train having half its length and travelling in the opposite direction at 54 kmph, in 12 seconds. If it also passes a railway platform in 112 minutes, the length of the platform is : a) 560 metres b) 620 metres c) 700 meres d) 750 metres e) 720 meters

Description : A train travelling at 36 kmph completely crosses another train having half its length and travelling in the opposite direction at 54 kmph, in 12 seconds. If it also passes a railway platform in 112 minutes, the length ... is : a) 560 metres b) 620 metres c) 700 meres d) 750 metres e) 720 meters

Last Answer : Answer: c)

Rohit sold his bicycle at 4 % profit. If he sold it for Rs.204 less, he would have made a 30% loss. What was his cost price(in Rs.)? a)630 b)640 c)600 d)560

Description : Rohit sold his bicycle at 4 % profit. If he sold it for Rs.204 less, he would have made a 30% loss. What was his cost price(in Rs.)? a)630 b)640 c)600 d)560

Last Answer : c)600 

A company shows the following balances: Sales $1,000,000 Sales Returns and Allowances 180,000 Sales Discounts 20,000 Cost of Goods Sold 560,000 What is the gross profit percentage? a. 56% b. 70% c. 44% d. 30%

Description : A company shows the following balances: Sales $1,000,000 Sales Returns and Allowances 180,000 Sales Discounts 20,000 Cost of Goods Sold 560,000 What is the gross profit percentage? a. 56% b. 70% c. 44% d. 30%

Last Answer : d. 30%

On a PC, how much memory is available to application software? a. 1024 KB b. 760 KB c. 640 KB d. 560 KB

Description : On a PC, how much memory is available to application software? a. 1024 KB b. 760 KB c. 640 KB d. 560 KB

Last Answer : c. 640 KB

Height of Low level platform for passengers for BG is --- high (a) 0.455 m* (b) 0.560 m (c) 0.650 m (d) 0.760 m

Description : Height of Low level platform for passengers for BG is --- high (a) 0.455 m* (b) 0.560 m (c) 0.650 m (d) 0.760 m

Last Answer : (a) 0.455 m*

Height of high level platform for passengers for BG is --- high (a) 0.455 m (b) 0.560 m (c) 0.650 m (d) 0.760 m*

Description : Height of high level platform for passengers for BG is --- high (a) 0.455 m (b) 0.560 m (c) 0.650 m (d) 0.760 m*

Last Answer : (d) 0.760 m*

Consider an array A[20, 10], assume 4 words per memory cell and the base address of array A is 100. What is the address of A[11, 5] ? Assume row major storage. (A) 560 (B) 565 (C) 570 (D) 575

Description : Consider an array A[20, 10], assume 4 words per memory cell and the base address of array A is 100. What is the address of A[11, 5] ? Assume row major storage. (A) 560 (B) 565 (C) 570 (D) 575

Last Answer : (A) 560

A train 560 m long crosses the platform of length 340 m in 45seconds. Find the speed of the train in km/hr A) 72km/hr B) 36km/hr C) 48km/hr D) 15km/hr

Description : A train 560 m long crosses the platform of length 340 m in 45seconds. Find the speed of the train in km/hr A) 72km/hr B) 36km/hr C) 48km/hr D) 15km/hr 

Last Answer : ANSWER:A Explanation: Length of the train = 560 m Length of the platform = 340 m Therefore, length of the train + length of the platform = 560 m + 340 m = 900 m Time taken by the train to cross the ... to km/hr, multiply by 18/5 Therefore, speed of the train = 20 18/5 km/hr = 72 km/hr

In a test, minimum passing percentage for girls and boys is 60% and 25% respectively. A boy scored 560 marks and failed by 160 marks. How many more marks did a girl require to pass in the test if she scored 216 marks ? a) 2123 b) 1512 c) 2251 d) 1325 e) 3989

Description :  In a test, minimum passing percentage for girls and boys is 60% and 25% respectively. A boy scored 560 marks and failed by 160 marks. How many more marks did a girl require to pass in the test if she scored 216 marks ? a) 2123 b) 1512 c) 2251 d) 1325 e) 3989

Last Answer : Answer: B  Total marks in the test = (560 + 160) × 100 /25  = 720 ×100/25  = 72000/25  = 2880  Passing marks for girls =2880 × 60/100  = 1728  Required marks = 1728 – 216  = 1512

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Description : Is it a wise choice to upgrade my GeForce GT 440 to GTS 450?

Last Answer : answer:GTX or GTFO. Seriously, given the price of the lower GTX-series compared to the performance, the GTS series isn’t worthwhile. Or, if you don’t mind AMD, the R7 is a good value. The R7 260X runs around $100–120 and is twice as powerful as the GTS450.

Is it normal for a 440 6 barrel 70 cuda engine to get really hot after a 15 mile drive?

Description : Is it normal for a 440 6 barrel 70 cuda engine to get really hot after a 15 mile drive?

Last Answer : You might wish to have the cooling system and radiator flushed, but how hot is awful hot. Sometimes running a bit lean can make an engine run hot. Also, if the radiator is not the correct one for the engine ... is pretty much all GM and it was an old 409, but I figure the basics are about the same.

What is the percentage of 170 out of 440?

Description : What is the percentage of 170 out of 440?

Last Answer : Divide 170 by 440; or 17 by 44, which is the same thing.

44 times 20 times 10 = 440 times 2 true or fause?

Description : 44 times 20 times 10 = 440 times 2 true or fause?

Last Answer : fause

Convert 440.0 cm to m?

Description : Convert 440.0 cm to m?

Last Answer : 4.4m

Why does 440 error appear when opening some websites ?

Description : Why does 440 error appear when opening some websites ?

Last Answer : I assume you are not a technical person , so I will try to give the answer using as few technical words as possible. When you ( user) type the address of a website from your browser ( client) and press enter ... contains various files such as PDFs , song files , web pages or html files.

What is the converted 51.1 seconds for 440 yards converted to 400 meters?

Description : What is the converted 51.1 seconds for 440 yards converted to 400 meters?

Last Answer : It works out at 50.8 seconds for 400 metres.

What number times 4 equals 440?

Description : What number times 4 equals 440?

Last Answer : 110

Who was a Greek historian who wrote a book called The Histories in 440 BC?

Description : Who was a Greek historian who wrote a book called The Histories in 440 BC?

Last Answer : Herodotus.

Which inks work in the Epson Stylus 440 printer?

Description : Which inks work in the Epson Stylus 440 printer?

Last Answer : The epson S020093 Black ink cartridge and Epson Tri Colour ink cartridge Epson S187093 Black Ink Cartridges & Epson S191089 Color Ink Cartridges work in the Stylus 440.

The normal concentration of chlorine in mg/100 ml of C.S.F is about (A) 200 (B) 250 (C) 300 (D) 440

Description : The normal concentration of chlorine in mg/100 ml of C.S.F is about (A) 200 (B) 250 (C) 300 (D) 440

Last Answer : Answer : D

The normal concentration of potassium in cells in ng/100 ml is about (A) 100 (B) 200 (C) 350 (D) 440

Description : The normal concentration of potassium in cells in ng/100 ml is about (A) 100 (B) 200 (C) 350 (D) 440

Last Answer : Answer : D

Average concentration of chloride ions in cerebrospinal fluid per 100 ml is (A) 40 mg (B) 440 mg (C) 160 mg (D) 365 mg

Description : Average concentration of chloride ions in cerebrospinal fluid per 100 ml is (A) 40 mg (B) 440 mg (C) 160 mg (D) 365 mg

Last Answer : Answer : B

A load with an impedance of 440 ohms is connected across the secondary of the transformer illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Description : A load with an impedance of 440 ohms is connected across the secondary of the transformer illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Last Answer : Answer: B

The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

If reading the AC voltage from the line lead of a 440 VAC controller the range switch illustrated should be set to ___________. EL-0047 A. 1,000 V B. 250 V C. R X 10,000 D. Unable to safely read with this meter.

Description : If reading the AC voltage from the line lead of a 440 VAC controller the range switch illustrated should be set to ___________. EL-0047 A. 1,000 V B. 250 V C. R X 10,000 D. Unable to safely read with this meter.

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Last Answer : Answer: B

The standard method of controlling the output voltage of a 440 volt, 60 Hz, AC generator is accomplished by adjusting the ____________. A. prime mover speed droop B. number of poles C. alternator field excitation D. load on the alternator

Description : The standard method of controlling the output voltage of a 440 volt, 60 Hz, AC generator is accomplished by adjusting the ____________. A. prime mover speed droop B. number of poles C. alternator field excitation D. load on the alternator

Last Answer : Answer: C

The output voltage of a 440 volt, 60 Hz AC generator is controlled by the ______________. A. load on the alternator B. load on the prime mover C. speed of the prime mover D. exciter output voltage

Description : The output voltage of a 440 volt, 60 Hz AC generator is controlled by the ______________. A. load on the alternator B. load on the prime mover C. speed of the prime mover D. exciter output voltage

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: D

Figure 'D' of the diagram shown in the illustration has a turns ratio of four to one. If a three-phase 440 volt supply is connected to terminals 'A-B-C', what voltage should develop across terminals 'a-b-c'? EL-0084 A. 64 volts B. 110 volts C. 190 volts D. 762 volts

Description : Figure 'D' of the diagram shown in the illustration has a turns ratio of four to one. If a three-phase 440 volt supply is connected to terminals 'A-B-C', what voltage should develop across terminals 'a-b-c'? EL-0084 A. 64 volts B. 110 volts C. 190 volts D. 762 volts

Last Answer : Answer: A