What causes Sagging joists?

What causes Sagging joists?
by

1 Answer

Answer :

Need answer
by

Related questions

For those of you with a crawlspace, do you have insulation in your floor joists?

Description : For those of you with a crawlspace, do you have insulation in your floor joists?

Last Answer : Insulation under the house, crawl ground/dirt has a plastic cloth to lower the amount of moisture in crawlspace. I open the vents when the night time temperature are above 50* F and close them when the night time temperature drops below 40* F.

Can I run a sink drain between the joists in my basement?

Description : Can I run a sink drain between the joists in my basement?

Last Answer : answer:I'm trying to visualize from your description, and here's what I have so far: Your kitchen sink drain routes into a concrete floor and from there somewhere through the concrete floor into the main drain ... , then I'd say that you need to abandon your plan or reroute all of the drain lines.

Is it possible that my ceiling does not have joists?

Description : Is it possible that my ceiling does not have joists?

Last Answer : It may be a dropped ceiling. The actual ceiling above it will have the joists.

Director of marketing Helen Simms tells her new marketing assistant that like most industrial firms, Juniper Joists relies heavily on personal selling to promote its products. When asked what is next in importance, Helen replies A)trade shows. B)print media. C)broadcast media. D)publicity. E)sales displays.

Description : Director of marketing Helen Simms tells her new marketing assistant that like most industrial firms, Juniper Joists relies heavily on personal selling to promote its products. When asked what is next in importance ... A)trade shows. B)print media. C)broadcast media. D)publicity. E)sales displays.

Last Answer : A)trade shows.

Are guys who walk around sagging so much they have to keep yanking up their breeches or holding them up to keep them off their ankles are like women who have shorts or skirts so short they have to keep tugging them down?

Description : Are guys who walk around sagging so much they have to keep yanking up their breeches or holding them up to keep them off their ankles are like women who have shorts or skirts so short they have to keep tugging them down?

Last Answer : answer:Not really, if we look into the murky origin of the sagging trend, we come across two stories, both originating from prisons. One is that sagging began in prisons as prisoners were forbidden from ... teeth) for his troubles. Pretty sure the police had a good laugh about that idiot. I did.

Any ideas for a sagging chin aside from surgery?

Description : Any ideas for a sagging chin aside from surgery?

Last Answer : Hold it up high! Pay no attention to your son.

How can I fix my sagging automobile ceiling upholstery?

Description : How can I fix my sagging automobile ceiling upholstery?

Last Answer : My best friend’s mom took a hammer and nail to that situation…Try it out.

3-year old Brandywine Maple's branches "umbrella-like", sagging, breaking

Description : 3-year old Brandywine Maple's branches "umbrella-like", sagging, breaking

Last Answer : Need Answer

Adolescent breast sagging is a sign of illness ?

Description : Adolescent breast sagging is a sign of illness ?

Last Answer : It is not uncommon for girls to have sagging breasts at a certain angular rate as they get older , but the tendency of sagging breasts in adolescence does not fall into the stage of normal physical changes. ... doctor as the shape of your breasts may change due to the presence of tumors.

How can I fix a sagging retaining wall?

Description : How can I fix a sagging retaining wall?

Last Answer : First, you need to get a builder or handyman out to provide a quote on whether the retaining wall can be repaired or needs replacing. Then you can engage their services to do the job.

A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is (A) 0.107 L (B) 0.207 L (C) 0.307 L(D) 0.407 L

Description : A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is (A) 0.107 L (B) 0.207 L (C) 0.307 L(D) 0.407 L

Last Answer : (B) 0.207 L

To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Description : To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Last Answer : Answer: Option B

The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Description : The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Last Answer : Answer: Option D

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

Fill in the blanks with the appropriate option. Each candidate claims to have a plan to ___________ the ___________ economy. (a) rejuvenate, sagging (b) Animate, flag (c) Restore, Upright (d) Create, bowed

Description : Fill in the blanks with the appropriate option. Each candidate claims to have a plan to ___________ the ___________ economy. (a) rejuvenate, sagging (b) Animate, flag (c) Restore, Upright (d) Create, bowed

Last Answer : Ans: a) rejuvenate…sagging 

Under sagging bending moment, the uppermost fiber of the beam is in (a) Shear (b) Compression (c) Tension (d) None)

Description : Under sagging bending moment, the uppermost fiber of the beam is in (a) Shear (b) Compression (c) Tension (d) None)

Last Answer : (b) Compression

The concavity produced on the beam section about the centre line when downward force acts on it is called as (a) Hogging or positive bending moment (b) Hogging or negative bending moment (c) Sagging or positive bending moment (d) Sagging or negative bending moment

Description : The concavity produced on the beam section about the centre line when downward force acts on it is called as (a) Hogging or positive bending moment (b) Hogging or negative bending moment (c) Sagging or positive bending moment (d) Sagging or negative bending moment

Last Answer : (b) Hogging or negative bending moment