Description : An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5]
Last Answer : Weight of NaCl = 10 kg Weight of H2O = 50 kg Total weight = 60 kg Weight % of NaCl = (10/ 60) * 100 =16.67% Weight % of H2O = (50/ 60) * 100 = 83.33% Molecular weight of NaCl = 58.5 k moles of NaCl ... 100 = 5.79% Mol % of H2O = (moles of H2O / Total moles)*100 = (2.78/ 2.949)*100 = 94.26%
Description : What is the molality of a salt solution prepared by dissolving two moles of salt in 500 grams of water?
Last Answer : ANSWER: 4
Description : What is the pH of an aqueous solution of 0.1 molar HCl? w) 7 x) 13 y) 1 z) 3
Last Answer : ANSWER: Y -- 1
Description : What is the molarity of a salt solution prepared b dissolving three moles of salt in 500 milliliters of water? w) 1 x) 2 y) 4 z) 6
Last Answer : ANSWER: Z -- 6
Description : A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution
Last Answer : (C) One litre of the solution
Description : A solution containing 2.675 g of `CoCl_(3).6NH_(3)` (molar mass `= 267.5 g mol^(-1)`) is passed through a cation exchanger. The chloride ions obtained
Last Answer : A solution containing 2.675 g of `CoCl_(3).6NH_(3)` (molar mass `= 267.5 g mol^(-1)`) is passed through a ... _(3)]` D. `[CoCl(NH_(3))_(5)]Cl_(2)`
Description : Under ambient conditions, which among the following surfactants will form micelles in aqueous solution at lowest molar concentration ?
Last Answer : Under ambient conditions, which among the following surfactants will form micelles in aqueous solution at lowest molar ... N (CH_(3))_(3)Br^(-)`
Description : Among the following, which surfactant will form micelles in aqueous solution at the lowest molar concentration at ambient conditions?
Last Answer : Among the following, which surfactant will form micelles in aqueous solution at the lowest molar concentration at ambient ... (+)(CH_(3))_(3)Br^(-)`
Description : FeSO4 solution mixed with (NH4 ) 2 SO4 solution in 1 : 1 molar ratio gives the test of Fe2+ ion but CuSO4 solution mixed with aqueous ammonia in 1 : 4 molar ratio does not give the test of Cu2+ ion. Explain why ?
Last Answer : When FeSO4 and (NH4 ) 2 SO4 solution are mixed in 1 : 1 molar ratio, a double salt is formed. It has the formula FeSO4 (NH4 ) 2 SO4 . 6 H2O. In aqueous solution, the salt dissociates. When CuSO4 and NH3 are mixed in the molar ratio of 1 : 4 in solution, a complex [Cu (NH3 ) 4 ] SO4 is formed.
Description : After dissolving 0.25 kg of salt in 1 kg of water, its volume becomes 1200 cc. What is the concentration of solution ?
Last Answer : We know , 1 cc = 1cm ^ 3 = (10 ^ -6) m ^ 3 Density of salt water = (1 + 0.25) / (1200 × 10 ^ - ৬) = 1.04 kg / (m 3)
Description : Number of grams of solute per liter of solution is called a. Normal solution b. Molar solution c. Molal solution d. simple solution
Last Answer : Molar solution
Description : What is the molecular formula of a compound with an empirical formula of C2OH4 and a molar mass of 88 grams per mole?
Last Answer : This compound may be dioxane - C4H8O2.
Description : The mass of one mole of a substance in grams is known as ______. A. Molar weight B. Molar mass C. Molar volume D. Molar constant
Last Answer : Molar mass
Description : The comple `[Fe(H_(2)O)_(6)NO]^(2+)` is formed in the brown ring test fro nitrates when freshly prepared `FesO_(4)` solution is added to aqueous solut
Last Answer : The comple `[Fe(H_(2)O)_(6)NO]^(2+)` is formed in the brown ring test fro nitrates when ... electrons is Fe. D. All the above are correct statement.
Description : in titration of 25 mL of the solution containing Cu2+ with the concentration of 0.01 molar , with SCN – (0.01 Molar) , if we use the indicator that changed its color in PSCN= 9. Calculate the error of titration PKSP(CuSCN) =13.4?
Last Answer : just the color change from the indicator. Thus, a careful selection of the indicator will reduce the indicator error. For example, if the equivalence point is at a pH of 8.4, then the ... are in the range of aqueous pH changes are of little use. Instead, the titrant and indicator used
Description : 10 ml 0.2 Molar Na2CO3 How many grams of 0.1 Molar HCl is needed to soothe ?
Last Answer : Na₂CO₃ + 2HCl = NaCl + CO₂ + H₂O of Na₂CO₃ , density S₁ = 0.2 M; Volume , V₁ = 10 mL HCl density S₂ = 0.1 M; Volume = V₂ 2S₁V₁ = S₂V₂ ∴ V₂ = 2S₁V₁ / S₂ = 2 0.2 10 / 0.1 = 40 mL The molecular mass of HCl , M = ... / MV₂ ∴ w = S₂MV₂ / 1000 = 0.1 36.5 40/1000 = 0.146 g (Ans.)
Description : How many millilitres of 3.0 molar of sulfuric acid are required to react with 0.900 grams of copper?
Last Answer : The volume of sulfuric acid is 2,3 mL.
Description : The metal which cannot be obtained by electrolysis of aqueous solution of its salts is
Last Answer : The metal which cannot be obtained by electrolysis of aqueous solution of its salts is A. Ag B. Mg C. Cu D. Al
Description : A healthy 70 kg man eats a well balanced diet containing adequate calories and 62.5 g of high quality protein per day. Measured in grams of nitrogen, his daily nitrogen balance would be (A) +10 g (B) +6.25 g (C) 0 g (D) –6.25 g
Last Answer : Answer : C
Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175
Last Answer : (C) 0.2
Description : Grams of butane (C4H10 ) formed by the liquefaction of 448 litres of the gas (measured at (STP) would be (A) 580 (B) 640 (C) 1160 (D) Data insufficient; can't be computed
Last Answer : (C) 1160
Description : A sample of grapefruit juice at 25 degrees Celsius has a hydronium concentration of 1.78 X 10-3 molar. What is the pH of the solution? w) 2.22 x) 2.75 y) 3.25 z) 6.33
Last Answer : ANSWER: X -- 2.75
Description : Mg is a component of (a) chlorophyll (b) cytochrome (c) haemoglobin (d) haemocyanin.
Last Answer : (a) chlorophyll
Description : Blood of Pheretima is (a) blue with haemocyanin in corpuscles (b) blue with haemocyanin in plasma (c) red with haemoglobin in corpuscles (d) red with haemoglobin in plasma.
Last Answer : (d) red with haemoglobin in plasma
Description : In which of the following animals, haemocyanin pigment is found? (a) Annelida (b) Echinodermata (c) Insecta (d) Mollusca
Last Answer : d) Mollusca
Description : Which one of the following is the respiratory pigment in man ? (1) Haemocyanin (2) Haemoerythrin (3) b-Carotene (4) Haemoglobin
Last Answer : Haemoglobin
Description : How many grams of KI are in 25.0ml of a 3.0 (mv) KI solution?
Last Answer : The solution contain 12,47 g KI.
Description : The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow
Last Answer : ANSWER: Y -- BETWEEN 25 AND 50% HOLLOW
Description : The half-life of an isotope of an element is 5 days. The mass of a 10 gram sample of this isotope remaining after 20 days is: w) 0.312 grams x) 0.625 grams y) 1.25 grams z) 2.50 grams
Last Answer : ANSWER: X -- 0.625 GRAMS
Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec
Last Answer : Answer: Option B
Description : What is the molality of a solution made by dissolving 6 moles of Noah in 3 kg of water?
Last Answer : Feel Free to Answer
Description : What is the molarity of a solution made by dissolving 6 moles of naoh in 3 kg?
Last Answer : Need answer
Description : The solution made by dissolving Salt (NaOH) in water is called as
Last Answer : Ans. Brine solution
Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Description : Which of the following operations does not involve leaching? (A) Dissolving gold from ores (B) Dissolving pharmaceutical products from bark or roots (C) Dissolving sugar from the cells of the beet (D) Removing nicotine from its water solution by kerosene
Last Answer : (D) Removing nicotine from its water solution by kerosene
Description : While dissolving a gas into a liquid at a constant temperature, the ratio of the concentration of the gas in the solution phase and in the gaseous phase is (A) Infinity (B) Unity (C) Constant (D) Negative
Last Answer : (C) Constant
Description : A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist
Last Answer : ANSWER: Y -- SOLUTE SOLUBILITY DECREASES WITH RISING SOLUTION TEMPERATURE
Description : An aqueous solution containing `1 M NiSO_(4) & 1 M S_(2) O_(8)^(2-)` is electrolysed using palladium electrode, at `25^(@)C` `{:(Ni^(+2)+2e^(-) rarrNi
Last Answer : An aqueous solution containing `1 M NiSO_(4) & 1 M S_(2) O_(8)^(2-)` is electrolysed using palladium electrode, ... is `2H^(+) + 2e^(-) rarr H_(2)`
Description : Methylene blue, from its aqueous solution, is adsorbed on activated charcoal at `25^(@) C`. For this process, the correct statement is
Last Answer : Methylene blue, from its aqueous solution, is adsorbed on activated charcoal at `25^(@) C` ... of temperature. D. The adsorption is irreversible.
Description : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at 1 atm is `("K"_("b"("H"_(2)"O"))=0.
Last Answer : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at ... C. `376. 4 K` D. ` 374 . 76 K`
Description : Which of the following aqueous solutions would hav the lowest boiling point? Would it be a 1.0 molal solution of: w) Hydrochloric acid x) Sodium Hydroxide y) Acetic Acid, z) Magnesium Chloride
Last Answer : ANSWER: Y -- ACETIC ACID
Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number
Last Answer : (D) Dependent on the Reynolds number
Description : In Celsius, the freezing point of a one-molal water solution of sodium phosphate, chemical formula Na3PO4, is expected to be: w) - 0.93 degrees Celsius x) - 1.86 degrees Celsius y) - 7.44 degrees Celsius z) - 3.72 degrees Celsius
Last Answer : ANSWER: C -- (- 7.44 DEGREES CELSIUS)
Description : Chlorine is prepared in the laboratory by treating manganese dioxide `(MnO_(2))` with aqueous hydrochloric acid according to the reaction, `4HCl_((aq)
Last Answer : Chlorine is prepared in the laboratory by treating manganese dioxide `(MnO_(2))` with aqueous hydrochloric acid according to ... g C. 8.4 g D. 3.65 g
Description : Which constituent affect the freezing point of milk B A. Protein B. Fat C. Total solids D. Lactose
Last Answer : Fat
Description : The pH of a 0.005 molar solution of calcium hydroxide is:
Last Answer : ANSWER: 12
Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system
Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect
Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point
Last Answer : ANSWER: D -- BOILING POINT