Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes
by

1 Answer

Answer :

Applications of MH Equipments:

image

by

Related questions

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Description : Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Last Answer : Parameters Floor Inspection Centralized Inspection Definition. Inspection is done at the place where the part is made or assembled is called floor inspection. The inspection is done ... Mode of inspection. Online inspection is possible Offline inspection needs to be done.

Explain the need and importance of material handling devices in an industry.

Description : Explain the need and importance of material handling devices in an industry. 

Last Answer : Need of material handling devices: Material handling is an important activity in the industries. A large part of indirect labour employed in an industry is engaged in handling of materials. It has ... material handling and provides proper working conditions. 6. Reduced in process inventory.

Suggest appropriate material handling device for

Description : Suggest appropriate material handling device for 

Last Answer : (i) Transporting coal in thermal power plant - Belt Conveyor. (ii) Transporting cotton in ginning unit - Trucks, Tractors and trailers. (iii) Transporting pallets - Fork lift truck, hand lift ... packed boxes of biscuits within industry - Hand wheel barrow or hand trolley or Porter's trolley.

Name the material handling devices for following activities:

Description : Name the material handling devices for following activities:

Last Answer : (i) To move and stack material at height:- Fork lift truck (ii) To lift heavy stones at height:- Cranes (iii) To move cement bags at a short and fixed distance:- Conveyor (iv) To move chemical from store to storage tank:- Pipelines

Describe various principles of material handling in details.

Description : Describe various principles of material handling in details.

Last Answer : A) Related to planning. - All activity should be planned. - Plan a system which include all the handling activities & co-coordinating the operations. - Simplification ... Performance efficiency principle: Determine efficiency of material handling performance in terms of expense per unit handled.

Explain with neat sketch any two material handling devices used in mass production.

Description : Explain with neat sketch any two material handling devices used in mass production.

Last Answer : 1.Roller conveyors may be gravity aided or powered and are employed for transporting products having flat bottoms. Bigger jobs can be handled as they are, whereas small items are put in boxes, tins ... and unloading of the products.   4.Screw Conveyor, Pneumatic Conveyor, Elevated Conveyor . 

Explain any six factors on which selection of material handling device depends.

Description : Explain any six factors on which selection of material handling device depends.

Last Answer : Factors Affecting the selection of Materials Handling Devices/Equipment: [1] Adaptability: The load carrying and movement characteristics of the equipment should fit the materials handling problem. [2] ... The consideration of the cost of the MH Equipment is an obvious factor in its selection

Explain the principles considered for selection of material handling equipment.

Description : Explain the principles considered for selection of material handling equipment.

Last Answer : 1. Planning :All activity should be planned. Plan a system which include all the handling activities & co-coordinating the operations. 2. Simplification principle: Reduced or eliminate ... 10. Maintenance principle: Plan for preventing maintenance and schedule repair of all handling equipment

__________ allows easier movement of items by fork lift trucks between internal destinations in the warehouse. A)unit loading B)piggybacking C)containerisation D)inventory management E)priority transportation

Description : __________ allows easier movement of items by fork lift trucks between internal destinations in the warehouse. A)unit loading B)piggybacking C)containerisation D)inventory management E)priority transportation

Last Answer : A)unit loading

Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Description : Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Last Answer : Difference between Job and Batch Production System with respect to following parameters:

List the time study equipments and its uses.

Description : List the time study equipments and its uses.

Last Answer : Time study equipments and its uses.  1. Time Stop watch- When a stop watch is used as a work measurement technique to record times and rates of working for the element of specified job carried ... and stopwatch in position.  4. Pencil, eraser, device like tachometer for checking the speed, etc.

State the significance of time study. What are the different time study equipments used to perform time study?

Description : State the significance of time study. What are the different time study equipments used to perform time study?

Last Answer : [1] It can be used to examine time of existing method [2] implemented for setting standard time required for operation [3] Used to determine performance rating of worker [4] IT can be used to ... chart etc [4] Clock/ watch 5. Boards for holding watches and paper 6. Videotape recorders.

Bucket Trucks: Lift Your Work to New Heights?

Description : Bucket Trucks: Lift Your Work to New Heights?

Last Answer : There are hardly more ubiquitous construction tools than buckettrucks. These devices are critical when dealing with work requiringoverhead lifting, especially at the heights often necessary to workin cramped urban spaces ... , meaning that while you can only slide out in one direction ata time, yo

Write About Screw Conveyor And Bucket Conveyors?

Description : Write About Screw Conveyor And Bucket Conveyors?

Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.

Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Last Answer : (C) Bucket elevators

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Description : The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

Write stepwise procedure for converting raw material into finished product.

Description : Write stepwise procedure for converting raw material into finished product.

Last Answer : Planning of process from raw material to finished product:- Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, ... fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

What's the difference between a fork lift and a material lift?

Description : What's the difference between a fork lift and a material lift?

Last Answer : A forklift will lift up to ten thousand pounds. A material lift is smaller and will only lift about five hundred pounds. There also a price difference if you know which one you need and want.

State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Description : State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Last Answer : Types of Compaction Equipment: - i) Compaction by Rolling: - a) Smooth wheel rollers : Suitability: These rollers best suitable for 5ubgrade or base coarse compaction of cohesion less soils. ... : Suitable for compacting granular soils. with no fines in layer up to 1 m thickness

function of equipment’s used in sub-stations : (i) Earth Switch (ii) Relay (iii) Lighting Arrester (iv) Auxiliary transformer

Description : function of equipment’s used in sub-stations : (i) Earth Switch (ii) Relay (iii) Lighting Arrester (iv) Auxiliary transformer 

Last Answer : (i) Earth Switch   It's function is to discharge the ground capacitance when line is open circuited for maintenance purpose by isolator.) Earthing switch is inter - locked with isolator from the safety point ... 3-ph, 4wire, 400V) to give supply to control room, area lighting, staff quarters etc, 

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

Explain the various steps for planning a process for product from raw material to finished product in an industry.

Description : Explain the various steps for planning a process for product from raw material to finished product in an industry.

Last Answer : 1. Analysis of Product and its specification: - During analysis, following parameter should be considereda. Drawing and specification of product. b. Quality of product. c. Number of parts/components per ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Description : Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Last Answer : Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Description : List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Last Answer : Steps for Process Planning for a Product from Raw Material to Finished Product: Specific activities involved in planning a process for a product from raw material to finished product in an ... gauges required for inspection. This operation described in detail, in later section of this chapter.

Arrange the following Steps of selling process in a proper order in order to help the sales man ? o I. Approach o II. Presentation and demonstration o III. Prospecting and qualifying o IV. Closing sales and follow-up o V. Handling objectives 1. II, III, I, V, IV 2. I, II, III, IV, V 3. I, II, V, III, IV 4. II, I, III, V, IV 5. None of these

Description : Arrange the following Steps of selling process in a proper order in order to help the sales man ? o I. Approach o II. Presentation and demonstration o III. Prospecting and qualifying o IV. Closing sales and follow-up o V. ... 3. I, II, V, III, IV 4. II, I, III, V, IV 5. None of these

Last Answer : I, II, III, IV, V

State true or false. i) Jpanel is a class included in awt package. ii) Anonymous classes are mostly used for event handling. iii) Names of anonymous classes must be unique iv) JOptionPane is an inner class A) i-false, ii-false, iii-true, iv-true B) i-true, ii-false, iii-true, iv-false C) i-false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Description : State true or false. i) Jpanel is a class included in awt package. ii) Anonymous classes are mostly used for event handling. iii) Names of anonymous classes must be unique iv) JOptionPane is an inner class A) i-false ... ) i-false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Last Answer : C) i-false, ii-true, iii-false, iv-false

Conflict-handling behaviors are initiated in _____, in which there is a dynamic process of interaction. (a) Stage II of the conflict process ; (b) Stage III of the conflict process (c) Stage IV of the conflict process ; (d) Stage V of the conflict process

Description : Conflict-handling behaviors are initiated in _____, in which there is a dynamic process of interaction. (a) Stage II of the conflict process ; (b) Stage III of the conflict process (c) Stage IV of the conflict process ; (d) Stage V of the conflict process

Last Answer : (b) Stage III of the conflict process

Enlist the various functions of PPC. Describe: (i) Scheduling (ii) Routing in details.

Description : Enlist the various functions of PPC. Describe: (i) Scheduling (ii) Routing in details.

Last Answer : Functions of PPC: Function related to material selection. Function related to selection of method. Function related to selection of machines and equipment. Routing. * Estimating. Loading ... of operation, machine used, tools and gauges used and standard time for any particular operation.

Anyone have a video of those british crane style tow trucks?

Description : Anyone have a video of those british crane style tow trucks?

Last Answer : The the top one on this page ? ?

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Enlist any four basic components used in robotics systems also write their functions.

Description : Enlist any four basic components used in robotics systems also write their functions.

Last Answer : Basic components used in robotics system with their functions: 1. Arm: The arm is the part of the robot that positions the end effectors and sensors to do their pre-programmed task. 2. End-effectors ... 6. Drive: The drive is the engine or motor that moves the links into their designated positions.

Draw the symbols and write color code of any eight therbligs

Description : Draw the symbols and write color code of any eight therbligs

Last Answer : Draw the symbols and write color code of any eight therbligs

List down the different types of production system in industry and give practical example of each type of production system.

Description : List down the different types of production system in industry and give practical example of each type of production system.

Last Answer : Types of Production system.  1. Intermittent production a. Job order production system: Examples - Repair shops, fabricators, Special purpose machine manufacturer industries, Civil works etc. ... production: Examples - Sugar industry, Steel industry, Cement industry, Paper industry etc.

State any four types of grippers used in robots with one applications of each.

Description : State any four types of grippers used in robots with one applications of each.

Last Answer : [1] Vacuum Gripper:- Flat and light weight Surfaces / Palletizing materials [2] Pneumatic Gripper:- Slightly weight parts [3] Hydraulic Gripper:- Heavy parts in industry [4] Servo electric ... objects such as steel sheets or tables [6] Claw Grippers:- Pick and lace and Assembly operations

What is meant by 5'S'? Explain each 'S' in details

Description : What is meant by 5'S'? Explain each 'S' in details

Last Answer : 5 S' Concept:- 5'S is the name of a workplace organization methodology that uses a list of five Japanese words which are seiri, seiton, seiso, seiketsu and shitsuke constitute the system. ... Eliminate unwanted items. ➢ Maintain the discipline at work place ➢ Improved safety

State the meaning of each ‘S’ in ‘5S’.

Description : State the meaning of each ‘S’ in ‘5S’.

Last Answer : Meaning of each ‘S’ in ‘5S’

Which of these two jobs do you think is more physically demanding, a "desk job" or a fork lift driver?

Description : Which of these two jobs do you think is more physically demanding, a "desk job" or a fork lift driver?

Last Answer : I bet that a forklift driver has to do a lot more than to just drive forklifts. It is also a lot more dangerous.

How much training is required of a fork lift operator?

Description : How much training is required of a fork lift operator?

Last Answer : Most companies offer their own training for their in house forklift drivers. The length of that training depends on the time set by Human Resource department. You will more than likely have to pass written and driving test before becoming certified.

Give brief note about fork lift truck?

Description : Give brief note about fork lift truck?

Last Answer : Ans: 1. Check breaks, lift tilt and tires. 2. Check the stability of load before moving it 3. Never leave your fork lift truck un-attend with motor running 4. Never park fork lift truck on passage ... 14. Fork should be lowered to the floor when the truck is unattended 15. Stay alert t all times

Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Last Answer : (C) Sulphuric acid upto 60°C