Is 10m greater than 120cm?

Is 10m greater than 120cm?
by

1 Answer

Answer :

yes10.0m - 1.2m = 8.8m
by

Related questions

Standard disc plough contains steel disc of diameter. a) 10-30cm b) 30-60cm c) 60-90cm d) 90-120cm

Description : Standard disc plough contains steel disc of diameter. a) 10-30cm b) 30-60cm c) 60-90cm d) 90-120cm

Last Answer : 60-90cm

A rod, 120cm long and of diameter 3.0 cm is subjected to an axial pull of 18 kN. The stress in N/mm2 is. a. 22.57 b. 23.47 c. 24.57 d. 25.47

Description : A rod, 120cm long and of diameter 3.0 cm is subjected to an axial pull of 18 kN. The stress in N/mm2 is. a. 22.57 b. 23.47 c. 24.57 d. 25.47

Last Answer : d. 25.47

Basic values of span/effective depth ratios to be used for beams and slabs with spans [ A ] Less than 10m [ B ] Less than 20 m [ C ] 10 m- 20 m [ D ] More than 20 m

Description : Basic values of span/effective depth ratios to be used for beams and slabs with spans [ A ] Less than 10m [ B ] Less than 20 m [ C ] 10 m- 20 m [ D ] More than 20 m

Last Answer : [ A ] Less than 10m

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : longest pole can be faced along the diagonal and its length =102+102+52​=225​=15m

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : Solution of this question

ABCD is a parallelogram AE pependicular to DC CF perpendixular to AD AB =16 m ,AE =8m ,CF =10m ,fimd AD -Maths 9th

Description : ABCD is a parallelogram AE pependicular to DC CF perpendixular to AD AB =16 m ,AE =8m ,CF =10m ,fimd AD -Maths 9th

Last Answer : This answer was deleted by our moderators...

how do you convert 0.25mL of 0.10M HCI → mols HCI

Description : how do you convert 0.25mL of 0.10M HCI → mols HCI

Last Answer : Need Answer

A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-

Description : A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-

Last Answer : A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2) ... in the rope remain constant along the length of the rope

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

What is the area of a cylinder of 1m x 10m?

Description : What is the area of a cylinder of 1m x 10m?

Last Answer : First, what do you mean by "area of a cylinder"?Area is a property of two dimensional shapes whereas a cylinder is a three dimensional shape.I guess that you mean "surface area of a cylinder"Next, you ... , 10m = height1m = diameter, 10m = height1m = height, 10m = radius1m = height, 10m = diameter.

Which of the following is closest to a yard in length? A. 0.01m B. 0.1m C. 1m (Answer) D. 10m E. 100m

Description : Which of the following is closest to a yard in length? A. 0.01m B. 0.1m C. 1m (Answer) D. 10m E. 100m

Last Answer : C. 1m (Answer)

The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Description : The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Last Answer : b) 28

Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Description : Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Last Answer : d) 1.2

The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Description : The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Last Answer : c) 100

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s. How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Description : In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Last Answer : Let the uniform speeds of A,B,C be vA,vB,vC, respectively. Let t1 be the time taken for the race between A and B and t2 be the time taken for race between B and C Since A covers the distance in time t1, race between A and C ... ) = VB/ VC = d/(d-10) Thus (d-20)(d-10)=d(d-28).Hence, d=100. Answer: c)

The standard length of the shaft is (a) 5 m (b) 8 m (c) 9 m (d) 10m

Description : The standard length of the shaft is (a) 5 m (b) 8 m (c) 9 m (d) 10m

Last Answer : (a) 5 m

eripheral velocity of impact cutter is about: A.50m/sec B.20m/sec C.10m/sec D.5m/sec

Description : eripheral velocity of impact cutter is about: A.50m/sec B.20m/sec C.10m/sec D.5m/sec

Last Answer : A.50m/sec

While doing final location survey, the centre line is fully marked with pegs at --- metre distance (a) 10m (b) 20m* (c) 30m (d) 50m

Description : While doing final location survey, the centre line is fully marked with pegs at --- metre distance (a) 10m (b) 20m* (c) 30m (d) 50m

Last Answer : (b) 20m*

A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Last Answer : c) Clear Span*

Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

Two pumps M and N can fill a cistern in 10m and 15m respectively. If both the pumps are opened simultaneously, after how much time should N be closed so that the cistern is full in 8 minutes ? A) 5min B) 6min C) 3min D) 7min

Description : Two pumps M and N can fill a cistern in 10m and 15m respectively. If both the pumps are opened simultaneously, after how much time should N be closed so that the cistern is full in 8 minutes ? A) 5min B) 6min C) 3min D) 7min

Last Answer :  C X(1/10+1/15) +(8-x)1/10 = 1 5x/30+8-x/10 =1 5x+24-3x/30 =1 2x+24 = 30 2x=6 X=6/2 = 3