A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-

A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2)]` :-
by

1 Answer

Answer :

A uniform rope of mass M=0.1kg and length L=10m hangs from the celling. `[g=10m//s^(2) ... in the rope remain constant along the length of the rope
by

Related questions

A rope of weight 0.5 kg/m hangs from a drum for a height of 6 m. The work done in winding up the rope will be a.9 kg-m b.3 kg-m c.12 kg-m d.18 kg-m e.6 kg-m

Description : A rope of weight 0.5 kg/m hangs from a drum for a height of 6 m. The work done in winding up the rope will be a.9 kg-m b.3 kg-m c.12 kg-m d.18 kg-m e.6 kg-m

Last Answer : a. 9 kg-m

There was a fat man. He was being chased by zombies. The only way to get away was to cross a rope bridge. The rope bridge could only carry 80kg and the man was 79kg. The fat man had 2 things he needed to carry. Each weighed 1kg. How was he going to get across? -Riddles

Description : There was a fat man. He was being chased by zombies. The only way to get away was to cross a rope bridge. The rope bridge could only carry 80kg and the man was 79kg. The fat man had 2 things he needed to carry. Each weighed 1kg. How was he going to get across? -Riddles

Last Answer : Juggle the 2 things while getting across.

In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Description : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Last Answer : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two ... mean position of rod D. None of the above

In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Description : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Last Answer : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing ... ^(2)C)/(K))` D. None of these

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Last Answer : c) Clear Span*

The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Description : The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Last Answer : c) 100

The standard length of the shaft is (a) 5 m (b) 8 m (c) 9 m (d) 10m

Description : The standard length of the shaft is (a) 5 m (b) 8 m (c) 9 m (d) 10m

Last Answer : (a) 5 m

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Description : 1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Last Answer : b)200 g

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

Which of the following is closest to a yard in length? A. 0.01m B. 0.1m C. 1m (Answer) D. 10m E. 100m

Description : Which of the following is closest to a yard in length? A. 0.01m B. 0.1m C. 1m (Answer) D. 10m E. 100m

Last Answer : C. 1m (Answer)

Is a celling fan forcing the warm air downword convection?

Description : Is a celling fan forcing the warm air downword convection?

Last Answer : Need answer

All of the following facts are true about non-steroidal anti-inflammatory drugs (NSAIDs) except (a) They are antipyretic (b) There is a celling effect to their analgesia (c) They can cause tolerance (d) They do not cause dependence (e) They are anti-inflammatory

Description : All of the following facts are true about non-steroidal anti-inflammatory drugs (NSAIDs) except (a) They are antipyretic (b) There is a celling effect to their analgesia (c) They can cause tolerance (d) They do not cause dependence (e) They are anti-inflammatory

Last Answer : Ans: C

What fraction is 1kg in 250 g?

Description : What fraction is 1kg in 250 g?

Last Answer : 250/1000

In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Description : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Last Answer : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with ... P_(2) = 32 J//s` D. None of these

In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Description : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Last Answer : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant ... `16 N` C. `24 N` D. `32 N`

In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Description : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant velocity v=2m/s towards right. Given

Last Answer : In the figure shown, a conducting wire PQ of length l=1m, is moved in a uniform magnetic field B=4T with constant ... `0` B. `2A` C. `4A` D. `6A`

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

What is the weight of a mass of 1kg equal to Newton ?

Description : What is the weight of a mass of 1kg equal to Newton ?

Last Answer : Sitting on the earth , the weight of an object of mass 1 kg = mg = 1 * 9.8 [g = 9.8ms ^ -2] = 9.8 N ( Newton) Therefore , the weight of an object of mass 1 kg on Earth is 9.8 Newtons.

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

A uniform thin rod of mass `m` and length `R` is placed normally on surface of earth as shown. The mass of earth is `M` and its radius `R`. Then the m

Description : A uniform thin rod of mass `m` and length `R` is placed normally on surface of earth as shown. The mass of earth is `M` and its radius `R`. Then the m

Last Answer : A uniform thin rod of mass `m` and length `R` is placed normally on surface of earth as shown. The mass of earth ... 2GMm)/R^(2)` D. `(4 GMm)/R^(2)`

A calf is tied with a rope of length 6 m at the corner of a square grassy lawn of side 20 m. If the length of the rope is increased by 5.5 m, find the increase in area of the grassy lawn in which the calf can graze. -Maths 10th

Description : A calf is tied with a rope of length 6 m at the corner of a square grassy lawn of side 20 m. If the length of the rope is increased by 5.5 m, find the increase in area of the grassy lawn in which the calf can graze. -Maths 10th

Last Answer : Given, The initial length of the rope = 6 m Then the rope is said to be increased by 5.5m So, the increased length of the rope = (6 + 5.5) = 11.5 m We know that, the corner of the lawn is a quadrant of a circle. Thus ... – 62) = 1/4 x 22/7 (132.25 – 36) = 1/4 x 22/7 x 96.25 = 75.625 cm2

The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift is moving down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Description : The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift ... down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Last Answer : e. Remains constant irrespective of the lift movement

A block of mass m is pulled along a surface as shown. The coefficient of kinetic friction between the block and the surface is m and the tension in the rope is T. The acceleration of the block is (a) a = T cos q/mg (b) a = T cos q/mgm (c) a = T cos q/m + mmg (d) None of the above

Description : A block of mass m is pulled along a surface as shown. The coefficient of kinetic friction between the block and the surface is m and the tension in the rope is T. The acceleration of the block is (a) a = T cos q/mg (b) a = T cos q/mgm (c) a = T cos q/m + mmg (d) None of the above

Last Answer : Ans:(d)

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : longest pole can be faced along the diagonal and its length =102+102+52​=225​=15m

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : Solution of this question

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

L/G ratio in a cooling tower is a ratio of _____. • Length and girth • Length and temperature gradient • Water flow rate and air mass flow rate • Air mass flow rate and water flow rate

Description : L/G ratio in a cooling tower is a ratio of _____. • Length and girth • Length and temperature gradient • Water flow rate and air mass flow rate • Air mass flow rate and water flow rate

Last Answer : Water flow rate and air mass flow rate

The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Description : The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Last Answer : b) 28

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)

Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)

Last Answer : (A) (3/4) (L²w/GA)

If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

ABCD is a parallelogram AE pependicular to DC CF perpendixular to AD AB =16 m ,AE =8m ,CF =10m ,fimd AD -Maths 9th

Description : ABCD is a parallelogram AE pependicular to DC CF perpendixular to AD AB =16 m ,AE =8m ,CF =10m ,fimd AD -Maths 9th

Last Answer : This answer was deleted by our moderators...

In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Description : In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Last Answer : Let the uniform speeds of A,B,C be vA,vB,vC, respectively. Let t1 be the time taken for the race between A and B and t2 be the time taken for race between B and C Since A covers the distance in time t1, race between A and C ... ) = VB/ VC = d/(d-10) Thus (d-20)(d-10)=d(d-28).Hence, d=100. Answer: c)

Basic values of span/effective depth ratios to be used for beams and slabs with spans [ A ] Less than 10m [ B ] Less than 20 m [ C ] 10 m- 20 m [ D ] More than 20 m

Description : Basic values of span/effective depth ratios to be used for beams and slabs with spans [ A ] Less than 10m [ B ] Less than 20 m [ C ] 10 m- 20 m [ D ] More than 20 m

Last Answer : [ A ] Less than 10m

Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

Two pumps M and N can fill a cistern in 10m and 15m respectively. If both the pumps are opened simultaneously, after how much time should N be closed so that the cistern is full in 8 minutes ? A) 5min B) 6min C) 3min D) 7min

Description : Two pumps M and N can fill a cistern in 10m and 15m respectively. If both the pumps are opened simultaneously, after how much time should N be closed so that the cistern is full in 8 minutes ? A) 5min B) 6min C) 3min D) 7min

Last Answer :  C X(1/10+1/15) +(8-x)1/10 = 1 5x/30+8-x/10 =1 5x+24-3x/30 =1 2x+24 = 30 2x=6 X=6/2 = 3

A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Description : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Last Answer : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of ... lv)/(r)` D. `(Blv^(2))/(r)`

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Description : The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Last Answer : (B) 3WL/2fd²

If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Description : If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Last Answer : Answer: Option B

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material

Description : Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material

Last Answer : c. WL/2E

A conductor of length 5 cm is moved paralllel to itself with a speed of `2m//s`, perpendicular to a uniform magnetic field of `10^(-3) Wb//m^(2).` the

Description : A conductor of length 5 cm is moved paralllel to itself with a speed of `2m//s`, perpendicular to a uniform magnetic field of `10^(-3) Wb//m^(2).` the

Last Answer : A conductor of length 5 cm is moved paralllel to itself with a speed of `2m//s`, perpendicular to a uniform ... `1xx10^(-4)V` D. `2xx10^(-4) V`

A simple pendulum consisting of a mass M attached to a string of length L is released from rest at an angle `alpha`. A pin is located at a distance l

Description : A simple pendulum consisting of a mass M attached to a string of length L is released from rest at an angle `alpha`. A pin is located at a distance l

Last Answer : A simple pendulum consisting of a mass M attached to a string of length L is released from rest at an angle `alpha` ... ^(-1) [(L cos alpha-l)/(L+l)]`

A particle of mass m and charge Q moving with a velocity v enters a region on uniform field of induction B Then its path in the region is s

Description : A particle of mass m and charge Q moving with a velocity v enters a region on uniform field of induction B Then its path in the region is s

Last Answer : A particle of mass m and charge Q moving with a velocity v enters a region on uniform field of induction B ... . circular,If `v.B=0` D. None of these

two persons a and b each of weight 500 n climb up a rope through a height of 10 m . a takes 20 s while b takes 40 s to achieve this task . what is the ratio of powers of a and b ? -Physics 9th

Description : two persons a and b each of weight 500 n climb up a rope through a height of 10 m . a takes 20 s while b takes 40 s to achieve this task . what is the ratio of powers of a and b ? -Physics 9th

Last Answer : The ratio of powers of A and B = 2: 1 Explanation : Where , Fa = 500N S = 10m Fb = 500N ta = 20s , tb = 40s

Two army persons A and B each of weight of 500 N climb up a rope through a height of 10 m. A takes 20 s while B takes 40 s to achieve this task. -Physics 9th

Description : Two army persons A and B each of weight of 500 N climb up a rope through a height of 10 m. A takes 20 s while B takes 40 s to achieve this task. -Physics 9th

Last Answer : The ratio of powers of A and B = 2: 1 Explanation : Where , Fa = 500N S = 10m Fb = 500N ta = 20s , tb = 40s