eripheral velocity of impact cutter is about: A.50m/sec B.20m/sec C.10m/sec D.5m/sec

Question

eripheral velocity of impact cutter is about: A.50m/sec B.20m/sec C.10m/sec D.5m/sec

eripheral velocity of impact cutter is about:
A.50m/sec
B.20m/sec
C.10m/sec
D.5m/sec

asked Jul 31, 2021 by anonymous

1 Answer

Related questions

Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Description : Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s

Last Answer : b)20-40m/s

While doing final location survey, the centre line is fully marked with pegs at --- metre distance (a) 10m (b) 20m* (c) 30m (d) 50m

Description : While doing final location survey, the centre line is fully marked with pegs at --- metre distance (a) 10m (b) 20m* (c) 30m (d) 50m

Last Answer : (b) 20m*

Cleaning of sugarcane is obtained at peripheral speed A. 12-15m/sec B. 18-20m/sec C. 20-25m/sec D. 25-30m/sec

Description : Cleaning of sugarcane is obtained at peripheral speed A. 12-15m/sec B. 18-20m/sec C. 20-25m/sec D. 25-30m/sec

Last Answer : B. 18-20m/sec

enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Last Answer : (a) 1.5-3.0m

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s. How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Description : In racing over a given distance, A can beat B by 20m, B can beat C by 10m, A can beat C by 28m. The racing distance is? a) 58 m b) 116 m c) 100 m d) 120 m e) cannot be determined

Last Answer : Let the uniform speeds of A,B,C be vA,vB,vC, respectively. Let t1 be the time taken for the race between A and B and t2 be the time taken for race between B and C Since A covers the distance in time t1, race between A and C ... ) = VB/ VC = d/(d-10) Thus (d-20)(d-10)=d(d-28).Hence, d=100. Answer: c)

The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Description : The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000

Last Answer : c) 100

A threshing cylinder of 15cm radius is rotating at 700rpm if peripheral velocity (m/sec) will be a. 11 b.105 c. 210 d. 660

Description : A threshing cylinder of 15cm radius is rotating at 700rpm if peripheral velocity (m/sec) will be a. 11 b.105 c. 210 d. 660

Last Answer : a. 11

The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Last Answer : D. Between the two lower Links

.The number of knives on powered chaff cutter a) 2-6 b) 1-2 c) 5-10 d) 10-20

Description : .The number of knives on powered chaff cutter a) 2-6 b) 1-2 c) 5-10 d) 10-20

Last Answer : a) 2-6

The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Last Answer : A. 800-1200 strokes/min

Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Last Answer : G. 600-1000 rpm

Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Last Answer : F. 35 rpm

knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Last Answer : a)Increase the co-efficient of friction between crop stalk machine

Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Description : Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Last Answer : (d) All of the above

nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Description : nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Last Answer : (d) All of the above

o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Description : o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Last Answer : b) 2.0cm/m

Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Last Answer : a)400-550 rpm

A tower of height 24m casts a shadow 50m and at the same time, a girl of height 1.8m casts a shadow. Find the length of the shadow of girl. (a) 3.7 5m (b)3 .5m (c) 3.25m (d) 3m

Description : A tower of height 24m casts a shadow 50m and at the same time, a girl of height 1.8m casts a shadow. Find the length of the shadow of girl. (a) 3.7 5m (b)3 .5m (c) 3.25m (d) 3m

Last Answer : (a) 3.7 5m

The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : longest pole can be faced along the diagonal and its length =102+102+52=225=15m

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : Solution of this question

A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Description : Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Last Answer : (D) All the above

The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Last Answer : D. All of the above

.In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Last Answer : a.100-120 rpm

illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Description : illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Last Answer : D)all of the above

In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

Kinematic index of the straw Walker is as ratio (a) Angular velocity of straw Walker to angular velocity of threshing drum (b) Angular velocity of straw Walker to angular velocity of threshing drum (c) Angular velocity of straw Walker to linear velocity of combine (d) All of the above

Description : Kinematic index of the straw Walker is as ratio (a) Angular velocity of straw Walker to angular velocity of threshing drum (b) Angular velocity of straw Walker to angular velocity of threshing drum (c) Angular velocity of straw Walker to linear velocity of combine (d) All of the above

Last Answer : (a) Angular velocity of straw Walker to angular velocity of threshing drum

A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Last Answer : d) All of the above

The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Description : The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Last Answer : (c)reel speed index

What is the frequency of a wave with a velocity of 100 ms and a wavelength of 20m?

Description : What is the frequency of a wave with a velocity of 100 ms and a wavelength of 20m?

Last Answer : Feel Free to Answer

The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5

Description : The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5

Last Answer : a) 162.5

A ball of mass 1 kg moving with a velocity of 2 m/sec collides directly with a stationary ball of mass 2 kg. If the first ball comes to rest after the impact the velocity of second ball after impact will be a.1.5 m/sec b.0.5 m/sec c.Zero d.2 m/sec e.1.0 m/sec

Description : A ball of mass 1 kg moving with a velocity of 2 m/sec collides directly with a stationary ball of mass 2 kg. If the first ball comes to rest after the impact the velocity of second ball after impact will be a.1.5 m/sec b.0.5 m/sec c.Zero d.2 m/sec e.1.0 m/sec

Last Answer : e. 1.0 m/sec

The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Description : The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Last Answer : b) 28

Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Description : Calculate the electric field when the conductivity is 20 units, electron density is 2.4 units and the velocity is 10m/s. Assume the conduction and convection current densities are same. a) 2.4 b) 4.8 c) 3.6 d) 1.2

Last Answer : d) 1.2

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

Find the electric field applied on a system with electrons having a velocity 5m/s subjected to a magnetic flux of 3.6 units. a) 15 b) 18 c) 1.38 d) 0.72

Description : Find the electric field applied on a system with electrons having a velocity 5m/s subjected to a magnetic flux of 3.6 units. a) 15 b) 18 c) 1.38 d) 0.72

Last Answer : b) 18

Find the Lorentz force of a charge 2.5C having an electric field of 5 units and magnetic field of 7.25 units with a velocity 1.5m/s. a) 39.68 b) 68.39 c) 86.93 d) 93.68

Description : Find the Lorentz force of a charge 2.5C having an electric field of 5 units and magnetic field of 7.25 units with a velocity 1.5m/s. a) 39.68 b) 68.39 c) 86.93 d) 93.68

Last Answer : a) 39.68

Find the electron density when convection current density is 120 units and the velocity is 5m/s. a) 12 b) 600 c) 24 d) 720

Description : Find the electron density when convection current density is 120 units and the velocity is 5m/s. a) 12 b) 600 c) 24 d) 720

Last Answer : c) 24

verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Description : verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Last Answer : .0.3to0.5cm,0.5cm

Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Description : Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Last Answer : .decreases,increases

A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.