What is equalvalent to 0.34 as a fraction?

1 Answer

Answer :

0.34 is a fraction. It is a fraction in decimal form rather than in the form of a ratio. However, that does not stop it being a fraction. Its rational equivalent is 34/100 which can be simplified, if required.

Related questions

Description : What is equalvalent to 0.34 as a fraction?

Last Answer : 0.34 is a fraction. It is a fraction in decimal form rather than in the form of a ratio. However, that does not stop it being a fraction. Its rational equivalent is 34/100 which can be simplified, if required.

Description : What fraction of an hour is 34 minuets?

Last Answer : It is 34/60 or 17/60 in its simplest form

Description : What fraction is bigger 34 or 115?

Last Answer : They are both integers, not fractions; and 115 is bigger.

Description : What fraction is bigger 34 or 115?

Last Answer : They are both integers, not fractions; and 115 is bigger.

Description : How do you say 0.34 in word form?

Last Answer : Need answer

Description : What is equal to 0.34 as a percent?

Last Answer : Simply multiply it by 100 to change it into a percentage and soit is 34%

Description : What is 0.34?

Last Answer : 0.34 is a decimal number equal to 34 hundredths.

Description : What number is 0.1 more than 412.34?

Last Answer : It is: 0.1 plus 412.34 = 412.44

Description : Is 0.34 bigger than 0.24?

Last Answer : yes0.10 biggerlike 34 cents is bigger than 24 cents

Description : What is 12.24 divided by 0.34?

Last Answer : 36

Description : Round 0.34 to the nearest tenth?

Last Answer : hello I need help

Description : The distance travelled per turn of α-helix in nm is (A) 0.34 (B) 0.44 (C) 0.54 (D) 0.64

Last Answer : Answer : C

Description : The value of work index does not change materially from one equipment to another. If the value of work index determined for close circuit grinding is Wi, then the same for open circuit grinding will be (A) 0.5 Wi (B) Wi (C) 1.34 Wi (D) 3.34 Wi

Last Answer : (C) 1.34 Wi

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Description : Momentum of electron having mass 9.1 × 10-31 kg and velocity 2.0 × 107 is A. 1.91 × 10-23 B. 2.34 × 10-23 C. 3.11 × 10-19 D. 7.88 × 10-34

Last Answer : 1.91 × 10-23

Description : To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to ... -free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Last Answer : C. Rs.33,346

Description : f the mass is of 10 Kg, find the natural frequency in Hz of the free longitudinal vibrations. The displacement is 0.01mm. a) 44.14 b) 49.85 c) 43.43 d) 46.34

Last Answer : b) 49.85

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (b) 2.5 meters

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (c) 2.2 meters

Description : Length of one loop of B-DNA (a) 3.4 nm (b) 0.34 nm (c) 20 nm (d) 10 nm

Last Answer : a) 3.4 nm

Description : One turn of the helix in a B-form DNA is approximately (a) 2 nm (b) 20 nm (c) 0.34 nm (d) 3.4 nm.

Last Answer : ) 3.4 nm.

Description : An organization isgranteda block of classless addresses with the starting address 199.34.32.0/27. How many addresses are granted? A) 8 B) 16 C) 32 D) none of the above

Last Answer : 16

Description : Argon is the third largest constituent of air (followed by N2 & O2 ). Its percentage by volume in air is (A) 0.14 (B) 0.34 (C) 0.94 (D) 1.4

Last Answer : (C) 0.94

Description : The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option D

Description : The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option C

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

Description : As per Stevenson's empirical formula, the approximate value of the height of the wave in metres is given by (A) 0.34 VF (B) 0.5 VF (C) 1.5 VF (D) 3.4 VF

Last Answer : (A) 0.34 VF

Description : If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Last Answer : (D) 0.34

Description : The porosity of a certain soil sample was found to be 80% and its specific gravity was 2:7; the critical hydraulic gradient will be estimated as (a) 0.34 (b) 0.92 (c) 1.0 (d) 1.5

Last Answer : (a) 0.34

Description : Which one of the following is the correct ratio of plastic moment to yield moment for a simply supported beam of uniform square cross section throughout the span (a) 1.5 (b) 1.7 (c) 2.0 (d) 2.34

Last Answer : (a) 1.5

Description : Minimum percentage area of tension reinforcement , when the grade of steel is Fe-250 [ A ] 0.2 [ B ] 0.25 [ C ] 0.34 [ D ] 0.44

Last Answer : [ C ] 0.34

Description : The potential of standard hydrogen electrode (SHE) is conventionally fixed as a) 0.1 volt b) 0.0 volt c) 0.242 volt d) 0.34 volt

Last Answer : b) 0.0 volt

Description : Estimate the number of atoms comprising a silicon chip that is 0.2 millimeters by 0.2 millimeters by 0.1 millimeters, given that the density of silicon is 2.34 grams per cubic centimeter, the number of atoms in a gram-weight is approximately 6 x 1023 atoms, and the atomic weight of silicon is 28:

Last Answer : ANSWER: 2 x 1017

Description : A space ship traveling toward Mars at 0.6 times the speed of light c shoots an ELECTRON beam at Mars. If the electrons travel at 0.6 c RELATIVE TO THE SPACE SHIP, at what speed do the electrons impact the surface of Mars? w) 0.6 c x) 0.88 c y) 1.2 c z) 1.34 c

Last Answer : ANSWER: X -- 0.88 c