What is the best capacity to measure a gasoline tank?

What is the best capacity to measure a gasoline tank?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

Just put tampons in the car's gasoline tank!

Description : Just put tampons in the car's gasoline tank!

Last Answer : What should I do when my car gets that “Not so fresh” feeling?

Is gasoline running out of an open tank?

Description : Someone stole my tank cap, will the gas run out in the morning?

Last Answer : Not until the morning - but rather cover the lid with a plastic bag so that it doesn't rain in your tank ...: o

If Molly's car gets 24 miles for each gallon of gasoline and she has 8 gallons of gasoline in her tank how far can she drive before having to stop and get gas?

Description : If Molly's car gets 24 miles for each gallon of gasoline and she has 8 gallons of gasoline in her tank how far can she drive before having to stop and get gas?

Last Answer : Feel Free to Answer

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Description : The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Last Answer : Length (l) and depth (h) of tank is 2.5 m and 10 m respectively. To find: The value of breadth, say b. Formula to find the volume of a tank = l b h = (2.5 b 10) m3= 25b m3 Capacity ... of water (Given) Therefore, 25000 b = 50000 This implies, b = 2 Therefore, the breadth of the tank is 2 m.

A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per sq m. The cost of digging increases with the depth and for th

Description : A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per sq m. The cost of digging increases with the depth and for th

Last Answer : A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per ... the dimensions of the tank for the least total cost.

Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

Description : Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

Last Answer : Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

What is the fuel tank capacity of a 2016 Chevy Cruise?

Description : What is the fuel tank capacity of a 2016 Chevy Cruise?

Last Answer : 13.7 US gallons.

What is the gas tank capacity of the 2008 Toyota Prius?

Description : What is the gas tank capacity of the 2008 Toyota Prius?

Last Answer : Feel Free to Answer

What is the capacity of a 2002 Chevy avalanche gas tank?

Description : What is the capacity of a 2002 Chevy avalanche gas tank?

Last Answer : What is the answer ?

What is the fuel tank capacity of Honda pilot 2013?

Description : What is the fuel tank capacity of Honda pilot 2013?

Last Answer : What is the answer ?

In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Description : In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Last Answer : ANSWER c. swept volume

In electronics what comes under tank circuit? (1) Resistance and capacity (2) Resistance and inductance (3) Capacity and inductance (4) Resistance, capacity and inductance

Description : In electronics what comes under tank circuit? (1) Resistance and capacity (2) Resistance and inductance (3) Capacity and inductance (4) Resistance, capacity and inductance

Last Answer : (3) Capacity and inductance Explanation: An LC circuit, also called a resonant circuit, tank circuit, or tuned circuit, consists of an inductor, represented by the letter L, and a capacitor, ... an electrical analogue of a tuning fork, storing energy oscillating at the circuit's resonant frequency.

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Last Answer : 9-22.5 litres

Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Description : Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Last Answer : 14 litres

A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Last Answer : 10-25.5 litres

Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Description : Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Last Answer : c)120

The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c

Description : The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c

Last Answer : d) a or b*

In electronics what comes under tank circuit ? (1) Resistance and capacity (2) Resistance and inductance (3) Capacity and inductance (4) Resistance, capacity and inductance

Description : In electronics what comes under tank circuit ? (1) Resistance and capacity (2) Resistance and inductance (3) Capacity and inductance (4) Resistance, capacity and inductance 

Last Answer : Capacity and inductance

How does one measure the capacity of a round bottom boiling flask?

Description : How does one measure the capacity of a round bottom boiling flask?

Last Answer : Fill it and pour it into a liquid measuring jug to measure the capacity.

What unit is used to measure energy when calculating specific heat capacity?

Description : What unit is used to measure energy when calculating specific heat capacity?

Last Answer : joules

What unit would you use to measure the capacity of a bucket in milliliters or liters?

Description : What unit would you use to measure the capacity of a bucket in milliliters or liters?

Last Answer : You can use either. However, the numbers come out moremanageable if you use liters.

What unit would you measure the capacity of a table spoon?

Description : What unit would you measure the capacity of a table spoon?

Last Answer : Need answer

what metric unit of mass and capacity should i use to measure the water in a washing machine.?

Description : what metric unit of mass and capacity should i use to measure the water in a washing machine.?

Last Answer : liters

What tool is used to measure capacity?

Description : What tool is used to measure capacity?

Last Answer : Liquid can also be measured in ounces, sometimes referred to as fluid ounces or seen as fl. oz. on packaging. The most popular tool used to measure capacity is the measuring cup.

Addis test is the measure of (A) Impairment of the capacity of the tubule to perform osmotic work (B) Secretory function of liver (C) Excretory function of liver (D) Activity of parenchymal cells of liver

Description : Addis test is the measure of (A) Impairment of the capacity of the tubule to perform osmotic work (B) Secretory function of liver (C) Excretory function of liver (D) Activity of parenchymal cells of liver

Last Answer : A

Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : (3) is a measure of the proportional of the existing capital stock used for current production. Explanation: Capacity utilisation refers to the extent or level to which the productive capacity of a ... as a percentage, it is computed by dividing the total capacity with the portion being utilized.

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Water separometer index (modified) (WSIM) of a petrofuel is the measure of its (A) Emulsification tendency (B) Water separation characteristics (C) Water content (D) Water absorbing capacity from atmosphere

Description : Water separometer index (modified) (WSIM) of a petrofuel is the measure of its (A) Emulsification tendency (B) Water separation characteristics (C) Water content (D) Water absorbing capacity from atmosphere

Last Answer : (B) Water separation characteristics

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity(C) A measure of its capacity(D) Both (A) and (B)

Description : Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity (C) A measure of its capacity (D) Both (A) and (B)

Last Answer : (D) Both (A) and (B)

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Description : What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Last Answer : Entropy

Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Description : Calorie is a measure of  (a) specific heat  (b) quantity of heat  (c) thermal capacity  (d)entropy  (e) work.

Last Answer : Answer : b

Nestle develops a scale to measure young adults' attitudes toward snacking. There is concern that if the questions were given to the same person several times they would produce different answers, Nestle is concerned about the scale's A)validity B)capacity C)dependability D)reliability

Description : Nestle develops a scale to measure young adults' attitudes toward snacking. There is concern that if the questions were given to the same person several times they would produce different answers, Nestle is concerned about the scale's A)validity B)capacity C)dependability D)reliability

Last Answer : D)reliability

What is a set of conditions used to measure how well a product or system functions? a. Flexibility b. Performance c. Capacity planning d. Benchmark

Description : What is a set of conditions used to measure how well a product or system functions? a. Flexibility b. Performance c. Capacity planning d. Benchmark

Last Answer : d. Benchmark

Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : is a measure of the proportional of the existing capital stock used for current production.

Unit to measure capacity of battery is

Description : Unit to measure capacity of battery is

Last Answer : Unit to measure capacity of battery is Ampere-hour