What is the circumference of a plate with a diameter of 4.3?

What is the circumference of a plate with a diameter of 4.3?
by

1 Answer

Answer :

Circumference of plate: 4.3*pi = 13.5 rounded to one decimalplace
by

Related questions

Four equal sized maximum circular plates are cut off from a square sheet of area 784 cm2. What is the circumference of each plate? a) 22 cm b) 44 cm c) 42 cm d) 40cm

Description : Four equal sized maximum circular plates are cut off from a square sheet of area 784 cm2. What is the circumference of each plate? a) 22 cm b) 44 cm c) 42 cm d) 40cm

Last Answer : b) 44 cm

What is the circumference of a circle with a diameter of 40 millimeters.?

Description : What is the circumference of a circle with a diameter of 40 millimeters.?

Last Answer : 125.66 mm

What is the diameter of a 22.5 circumference?

Description : What is the diameter of a 22.5 circumference?

Last Answer : 6

What is the diameter of a circle with a circumference of 12.25?

Description : What is the diameter of a circle with a circumference of 12.25?

Last Answer : Diameter of circle: 12.25/pi = 3.899 rounded to 3 decimalplaces

What is the diameter of a circumference of 2400mm?

Description : What is the diameter of a circumference of 2400mm?

Last Answer : Divide circumference by pi and you get 2400mm/3.14159 =approximately 763.94mm diameter.

What will happen if the diameter of the circle doubles how will the circumference change?

Description : What will happen if the diameter of the circle doubles how will the circumference change?

Last Answer : The circumference also doubles.

What is the diameter if the circumference is 4.25 inches?

Description : What is the diameter if the circumference is 4.25 inches?

Last Answer : Diameter of circle: 4.25/pi = 1.353 inches rounded to 3 decimalplaces

If a circle has a circumference of 132 inch what is the diameter?

Description : If a circle has a circumference of 132 inch what is the diameter?

Last Answer : Diameter of circle: 132/pi = 42 inches rounded to the nearestwhole number

How do you figure out the circumference of something without knowing the diameter?

Description : How do you figure out the circumference of something without knowing the diameter?

Last Answer : If you know the radius, double that to get diameter. If you haveneither radius or diameter, then measure around the outside.

How do you find the circumference of a circle knowing only the diameter?

Description : How do you find the circumference of a circle knowing only the diameter?

Last Answer : Circumference of a circle: pi times diameter

What is circumference of a 192 diameter?

Description : What is circumference of a 192 diameter?

Last Answer : circumference = π × diameter= π × 192 units= 192π units≈ 603 units

If r is the radius of a circle and d is its diameter is an equivalent formula for the circumference C 2r?

Description : If r is the radius of a circle and d is its diameter is an equivalent formula for the circumference C 2r?

Last Answer : Circumference of a circle: 2*pi*radius or diameter*pi

If r is the radius of a circle and d is its diameter is an equivalent formula for the circumference C 2r?

Description : If r is the radius of a circle and d is its diameter is an equivalent formula for the circumference C 2r?

Last Answer : Circumference of a circle: 2*pi*radius or diameter*pi

What is the circumference of the circle if the diameter is 24cm?

Description : What is the circumference of the circle if the diameter is 24cm?

Last Answer : Circumference of circle: 24*pi = 75.398 cm rounded to 3 decimalplaces

If the diameter is 16 cm what is the circumference?

Description : If the diameter is 16 cm what is the circumference?

Last Answer : Circumference of circle: 16*pi = 50.265 cm to 3 decimalplaces

What is radius and diameter if the circumference is 78.8?

Description : What is radius and diameter if the circumference is 78.8?

Last Answer : circumference = π diameter→ diameter = circumference π = 78.8 π = 25.0828... ≈ 25.1unitsdiameter = 2 radius→ circumference = π 2 radius→ radius = circumference π 2 = 78. ... errors. It was the re-entry of rounded data to a computerprogram that lead to the start of chaos theory.

what is the circumference of a 10 ft. diameter table?

Description : what is the circumference of a 10 ft. diameter table?

Last Answer : 123.14"

How is the circumference of a circle related to the length of its diameter?

Description : How is the circumference of a circle related to the length of its diameter?

Last Answer : asd

Atomic size refers to the ______ of an atom. (1) Radius (2) Circumference (3) Diameter (4) Centre

Description : Atomic size refers to the ______ of an atom. (1) Radius (2) Circumference (3) Diameter (4) Centre

Last Answer : (1) Radius Explanation: The term atomic size refers to the radius of an atom. The atomic size may be visualized as the distance between the centre of the nucleus and the outermost shell of an isolated atom.

The globe: a. is closer to the orbital floor than the roof b. is closer to the lateral wall of the orbital cavity than to medial wall c. has a vertical diameter less than the anteroposterior diameter d. has an anterior segment which form 1/4 of the circumference e is least protected laterally

Description : The globe: a. is closer to the orbital floor than the roof b. is closer to the lateral wall of the orbital cavity than to medial wall c. has a vertical diameter less than the anteroposterior diameter d. has an anterior segment which form 1/4 of the circumference e is least protected laterally

Last Answer : is closer to the lateral wall of the orbital cavity than to medial wall

An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

What is the radius of the circle/ I.Ratio of its area to circumference is >7. II.Diameter of the circle is ≤ 32. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question.

Description : What is the radius of the circle/ I.Ratio of its area to circumference is >7. II.Diameter of the circle is ≤ 32. If the question can be answered with the help of statement I alone, If ... the statements. If the data in either statement I or statement II alone is sufficient to answer the question.

Last Answer : Let the radius of the circle be r units From statement 1: [πr^2]/ [ 2 πr ] > 7 or r > 14 From statement II: 2r≤32 R ≤ 16 Hence, r can be 15 or 16 units Hence, Answer : d

Develop a program to find diameter, circumference and area of circle using function.

Description : Develop a program to find diameter, circumference and area of circle using function.

Last Answer : #include<stdio.h> #include<conio.h> void circle(float r) { float diameter,circumference,area; diameter=2*r; printf("\n Diameter=%f",diameter); circumference=2*3.14*r; printf ... :"); scanf("%f",&radius); circle(radius); getch(); }

A copper plate has a circular hole cut in it. If the plate is heated to a higher temperature, the diameter of the hole (a) Becomes smaller (b) Increases (c) Remains constant (d) Increases but the total area of the plate remains constant

Description : A copper plate has a circular hole cut in it. If the plate is heated to a higher temperature, the diameter of the hole (a) Becomes smaller (b) Increases (c) Remains constant (d) Increases but the total area of the plate remains constant

Last Answer : Ans:(b)

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent(A) 100(B) > 100(C) < 100(D) None of these

Description : If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent (A) 100 (B) > 100 (C) < 100 (D) None of these

Last Answer : (B) > 100

If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Description : If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is  given by  (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Last Answer : (B) (b - d)/b

According to Unwin's formula, the diameter of a rivet of plate of thickness is : (A) d = 6.05 t (B) d = 1.5 t + 4 (C) d = t(D) d = t + 1.5

Description : According to Unwin's formula, the diameter of a rivet of plate of thickness is :  (A) d = 6.05 t (B) d = 1.5 t + 4  (C) d = t (D) d = t + 1.5 

Last Answer : (A) d = 6.05 t

From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Description : From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Last Answer : (A) 0.5 cm

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40

Description : Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40

Last Answer : (D) 40

The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Description : The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Last Answer : Option A

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Description : The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Last Answer : (d) 16 t

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be a) 0.5 kg/cm2 b) 1.5 kg/cm2 c) 4.5 kg/cm2 d) 5.7 kg/cm2

Description : A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be a) 0.5 kg/cm2 b) 1.5 kg/cm2 c) 4.5 kg/cm2 d) 5.7 kg/cm2

Last Answer : b) 1.5 kg/cm2

Newton’s rings experiment is performed with air gap between lens and plate. Now that gap is filled with water. What will be effect on radius (or diameter)? (a) Radius (or diameter) will remain constant but there will be more brightness (b) Radius (or diameter) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Description : Newton's rings experiment is performed with air gap between lens and plate. Now that gap is filled with water. What will be effect on radius (or diameter)? (a) Radius (or diameter) will remain ... or diameter) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Last Answer : (c) Radius (or diameter) will decrease

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

How do you work out the centre of a circle when you only know 4 points on it's circumference?

Description : How do you work out the centre of a circle when you only know 4 points on it's circumference?

Last Answer : You only need 3 points to find the center. Here is a hint. The perpendicular bisector of any chord of a circle goes through the center. If you need more help, I will provide it.

The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Description : The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Last Answer : Circumference of the base of a cone = 2πr

The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Description : The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Last Answer : Circumference of the base of a cone = 2πr

The circumference of the base of a cylindrical -Maths 9th

Description : The circumference of the base of a cylindrical -Maths 9th

Last Answer : Height of the cylindrical vessel (h) = 25 cm Let r cm be the radius of the base of the cylindrical vessel. Circumference of the base = 2 πr = 132 cm ⇒ 2 x 22/7 x r = 132 ⇒ r = 132 x 7/2 x 22 = 21 ... 21 x 21 x 25 = 34650 cm3 ∴ Volume of water which vessel can hold = 34650 L/ 1000 L = 34.65 L

Circumference of circle ? -Maths 9th

Description : Circumference of circle ? -Maths 9th

Last Answer : Circumference of circle is - 2πr

How much the equatorial circumference is greater than the polar circumference? -General Knowledge

Description : How much the equatorial circumference is greater than the polar circumference? -General Knowledge

Last Answer : The answer is 'Approximately 68 km'

What is the approximate equatorial circumference of the earth? -General Knowledge

Description : What is the approximate equatorial circumference of the earth? -General Knowledge

Last Answer : The answer is '40,000 km'

What is the approximate equatorial circumference of the earth? -Do You Know?

Description : What is the approximate equatorial circumference of the earth? -Do You Know?

Last Answer : answer:

What is the approximate equatorial circumference of the earth? -Do You Know?

Description : What is the approximate equatorial circumference of the earth? -Do You Know?

Last Answer : answer:

What is the approximate equatorial circumference of the earth? -Do You Know?

Description : What is the approximate equatorial circumference of the earth? -Do You Know?

Last Answer : answer: