What is the distance from the center to edge of a circle?

What is the distance from the center to edge of a circle?
by

1 Answer

Answer :

It is the radius of the circle
by

Related questions

On the perceptional map, where is the “sweet/ideal spot” in the High End segment? a. in the center of the circle c. there is no sweet spot in High End b. on the trailing edge of the circle d. on the leading edge of the circle

Description : On the perceptional map, where is the “sweet/ideal spot” in the High End segment? a. in the center of the circle c. there is no sweet spot in High End b. on the trailing edge of the circle d. on the leading edge of the circle

Last Answer : d. on the leading edge of the circle

Is the shortest distance from the center of the inscribed circle to the triangle sides is the circles?

Description : Is the shortest distance from the center of the inscribed circle to the triangle sides is the circles?

Last Answer : It is its inradius.

Pick up the incorrect statement from the following: (A) The C.G. of a circle is at its center (B) The C.G. of a triangle is at the intersection of its medians (C) The C.G. of a rectangle is at the intersection of its diagonals (D) The C.G. of a semicircle is at a distance of r/2 from the center

Description : Pick up the incorrect statement from the following:  (A) The C.G. of a circle is at its center  (B) The C.G. of a triangle is at the intersection of its medians  (C) The C.G. of a ... intersection of its diagonals  (D) The C.G. of a semicircle is at a distance of r/2 from the center 

Last Answer : (D) The C.G. of a semicircle is at a distance of r/2 from the center 

When using a microwave, is it better to center the food in the carousel or put it on the edge like the wooden horsie you used to ride up and down on?

Description : When using a microwave, is it better to center the food in the carousel or put it on the edge like the wooden horsie you used to ride up and down on?

Last Answer : I've wondered about that, too, and if I had enough scientific curiosity I'd do some experimentation and careful recording of observation (or at least research, as you're starting to do with this ... perform and then record results to draw conclusions from experiments. But I'm sure that someone has.

What does it mean on an iPhone when instead of showing an "E" symbol for edge, it shows a rectangle with a hole in the center?

Description : What does it mean on an iPhone when instead of showing an "E" symbol for edge, it shows a rectangle with a hole in the center?

Last Answer : You have a GPRS signal only. ie no EDGE. Its a change brought on by the 2.0 software update. Before the update you only got a square with no circle.

Point where all weight of object acts is called A. central point B. center of gravity C. edge D. center of mass

Description : Point where all weight of object acts is called A. central point B. center of gravity C. edge D. center of mass

Last Answer : center of gravity

what bug is eating my japenese lilac tree frrom the edge inward in a circle?

Description : what bug is eating my japenese lilac tree frrom the edge inward in a circle?

Last Answer : Need Answer

The figure shows the front view of a convex lens, which originally had only one edge. Five holes of different shapes, namely triangle, square, pentagon, hexagon and circle, were drilled through it at points P, Q, R, S and T in such a way that the holes were parallel to each other, perpendicular to the edge and all the holes were still within the lens edge. What is the total number of edges in the lens after the holes were drilled?

Description : The figure shows the front view of a convex lens, which originally had only one edge. Five holes of different shapes, namely triangle, square, pentagon, hexagon and circle, were drilled through it at points P ... . What is the total number of edges in the lens after the holes were drilled? 

Last Answer : 57

The distance between the text and the paper edge is called indent. -Technology

Description : The distance between the text and the paper edge is called indent. -Technology

Last Answer : FalseThe distance between the text and the paper edge is called the margin.

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) (A) x1.5 (B) x0.8 (C) x-1.5 (D) x-0.8

Description : The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) (A) x1.5 (B) x0.8 (C) x-1.5 (D) x-0.8

Last Answer : (B) x0.8

Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Description : Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Last Answer : Answer: Option D

Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Description : Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Last Answer : Answer: Option C

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is (A) K/x (1 + x/d) + bw (B) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Description : If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured ... ) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Last Answer : Answer: Option B

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Description : The critical section for finding maximum bending moment for footing under masonry wall is located (A) At the middle of the wall (B) At the edge of the wall (C) Halfway between the middle and edge of the wall (D) At a distance equal to effective depth of footing from the edge of the wall

Last Answer : Answer: Option C

The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Description : The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Last Answer : Ans: (c) Correct Answer is: 0.45 m

The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Description : The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Last Answer : c) 1.5 x d*

A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Last Answer : c.8,7

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Description : Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Last Answer : a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2

To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Last Answer : b.Center coordinates and redraw the figure in new location

what- a new high- rise building has a koi pond in the center of a triangle lounge area. the pond is the largest circle that will fit inside the trianglewhich correctly names point H?

Description : what- a new high- rise building has a koi pond in the center of a triangle lounge area. the pond is the largest circle that will fit inside the trianglewhich correctly names point H?

Last Answer : the incenter of EFG

Is this statement true or falseThe circumcenter of a triangle is the center of its circumscribed circle?

Description : Is this statement true or falseThe circumcenter of a triangle is the center of its circumscribed circle?

Last Answer : 1

Definition of center and circle angles ?

Description : Definition of center and circle angles ?

Last Answer : center angle: When the vertex of an angle is located in the center of a circle , the angle is called a center angle of that circle. Circular angle: If the vertex of an angle is a point in a ... the circle in addition to the vertex on each side of the angle, the angle is called a circular angle.

What is the center and radius of a circle ?

Description : What is the center and radius of a circle ?

Last Answer : The fixed point is called the center of the circle. The distance of any point of the circle from the center of the circle is called the radius of that circle.

What is the equation for a circle with a center of (0 0) and a radius of 9?

Description : What is the equation for a circle with a center of (0 0) and a radius of 9?

Last Answer : The equation of the circle is: x^2 + y^2 = 81

What is the equation for a circle with a center of (-1 -5) and a radius of 6?

Description : What is the equation for a circle with a center of (-1 -5) and a radius of 6?

Last Answer : The equation is: (x+1)^2 +(y+5)^2 = 36

What is the center of the circle with a diameter whose endpoints are (27) and (-6-1)?

Description : What is the center of the circle with a diameter whose endpoints are (27) and (-6-1)?

Last Answer : Diameter endpoints: (2, 7) and (-6, -1)Centre of circle will be the midpoint which is: (-2, 3)

What is the equation of the circle with center at (3 2) and through the point (5 4).?

Description : What is the equation of the circle with center at (3 2) and through the point (5 4).?

Last Answer : Equation of circle: (x-3)^2 +(y-2)^2 = 8

What is a chord of the circle that contains the center of a circle called?

Description : What is a chord of the circle that contains the center of a circle called?

Last Answer : Feel Free to Answer

What is the center and the radius of the circle x2 plus y2 -4x -6y -3 equals 0?

Description : What is the center and the radius of the circle x2 plus y2 -4x -6y -3 equals 0?

Last Answer : Equation of circle: x^2 +y^2 -4x -6y -3 = 0Completing the squares: (x-2)^2 +(y-3)^2 = 16 square unitsTherefore center of circle is at (2, 3) and its radius is 4units

What is the center and the radius of the circle x2 plus y2 equals 12x -10y -12?

Description : What is the center and the radius of the circle x2 plus y2 equals 12x -10y -12?

Last Answer : Equation of circle: x^2 +y^2 = 12x-10y-12Completing the squares: (x-6)^2 +(y+5)^2 = 49So center of circle is at (6, -5) and its radius is 7 units

What is a force that pulls outward from the center of a circle?

Description : What is a force that pulls outward from the center of a circle?

Last Answer : This might be the description of centrifugal force.

What equation represents the circle whose center is (-5,3) and that passes through the point (-1,3)?

Description : What equation represents the circle whose center is (-5,3) and that passes through the point (-1,3)?

Last Answer : -40

An object moving in a circle of radius ‘r’ with a constant speed ‘v’ has a constant acceleration towards the center equal to A. v²⁄r B. v⁄r C. v²×r D. v×r

Description : An object moving in a circle of radius ‘r’ with a constant speed ‘v’ has a constant acceleration towards the center equal to A. v²⁄r B. v⁄r C. v²×r D. v×r

Last Answer : v²⁄r

Centripetal force is directed towards the A. tangent to circle B. center C. normal to circle D. parallel to circl

Description : Centripetal force is directed towards the A. tangent to circle B. center C. normal to circle D. parallel to circl

Last Answer : center

In order to keep a body moving in a circle, there exists a force on it that is directed toward the center of the circle. This force is known aA. Centrifugal force B. Centripetal force C. Gravitational Force D. magnetic forces

Description :  In order to keep a body moving in a circle, there exists a force on it that is directed toward the center of the circle. This force is known asA. Centrifugal force B. Centripetal force C. Gravitational Force D. magnetic force

Last Answer : Centripetal force

From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Description : From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Last Answer : (A) 0.5 cm

In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. c. At the center of each inner fine cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Description : In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. ... cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Last Answer : b. The inner fine cut circles represent the heart of the segment where demand is strong.

Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the newest technology at the cheapest price. c. High end customers want high performance and small size. d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Description : Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the ... . d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Last Answer : b. Low end customers want the newest technology at the cheapest price.

For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. High End preferred Position is located in the lower left of the circle. d. Performance preferred position is located in the lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Description : For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. ... lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Last Answer : c. High End preferred Position is located in the lower left of the circle.

Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Description : Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Last Answer : b. 4.0

The Traditional ideal spot is a. near the upper-left corner of its circle. b. near the lower-right of its circle. c. near the center of its circle. d. near the lower-left of its circle. e. near the upper-right of its circle.

Description : The Traditional ideal spot is a. near the upper-left corner of its circle. b. near the lower-right of its circle. c. near the center of its circle. d. near the lower-left of its circle. e. near the upper-right of its circle.

Last Answer : c. near the center of its circle.

Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Description : Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Last Answer : a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center.

Consider a car driving around a circular bend in the road. Which of the following CANNOT be constant? w) velocity of car x) speed of car y) nonrelativistic mass of car z) angular momentum of the car about the center of the circle

Description : Consider a car driving around a circular bend in the road. Which of the following CANNOT be constant? w) velocity of car x) speed of car y) nonrelativistic mass of car z) angular momentum of the car about the center of the circle  

Last Answer : ANSWER: W -- VELOCITY OF CAR

Two hockey pucks, of unequal mass and connected by a spring of negligible mass, rest on a horizontal frictionless surface. The spring is released, and the pucks move apart. The center of mass of the two pucks does one of the following. Does it: w) move in a circle x) move in the direction of the greater mass y) remain stationary z) move in the direction of the smaller mass

Description : Two hockey pucks, of unequal mass and connected by a spring of negligible mass, rest on a horizontal frictionless surface. The spring is released, and the pucks move apart. The center of mass of ... the direction of the greater mass y) remain stationary z) move in the direction of the smaller mass

Last Answer : ANSWER: Y -- REMAIN STATIONARY

When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle

Last Answer : When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle will depend on the radius of the circle.

Two cars were involved in an accident in the center of town. The man who was driving a little green car, had overtaken a big black car. The driver had misjudged the distance between him and the on-coming traffic and had to swerve back in, causing the black car to swerve and crash into a shop window. When the occupants of the cars were examined everyone in the green car was okay, but in the black car was one dead man. However, the driver of the green car was not charged with manslaughter, why was this so? -Riddles

Description : Two cars were involved in an accident in the center of town. The man who was driving a little green car, had overtaken a big black car. The driver had misjudged the distance between him and the on ... . However, the driver of the green car was not charged with manslaughter, why was this so? -Riddles

Last Answer : The black car was a hearse and was on its way to a funeral.