Is the liquid propane in a barbecue evaporates away because the user left the valve open a chemical or physical change?

1 Answer

Answer :

It's a physical change. Chemically, it's still propane - butit's physically changed from a liquid to a gas.

Related questions

Description : How is Alcohol evaporates physical or chemical change?

Last Answer : Need answer

Description : A little ether on the palm gives a cooling sensation because ether (a) is a cold liquid (b) evaporates (c) enters the pores of the skin (d) condenses on the palm

Last Answer : Ans:(b)

Description : How much do propane barbecue grills cost?

Last Answer : Propane barbecues can range in price from anywhere to hundreds of dollars to thousands of dollars. This will depend on the size of the grill, the brand and other aspects.

Description : What happens to a liquid, when the vapour pressure equals the atmospheric pressure? (1) The liquid cools (2) The liquid boils (3) No change (4) The liquid evaporates

Last Answer : (2) The liquid boils Explanation: Ordinary evaporation is a surface phenomenon -since the vapor pressure is low and since the pressure inside the liquid is equal to atmospheric pressure plus ... pressure is equal to atmospheric pressure, bubbles form, and the vaporization becomes a volume phenomena.

Description : What happens to a liquid, when the vapour pressure equals the atmospheric pressure? (1) The liquid cools (2) The liquid boils (3) No change (4) The liquid evaporates

Last Answer : The liquid boils

Description : Is propane gas buning to melt gold a physical change or a chemical change?

Last Answer : Need answer

Description : After long periods of use, a gray spot develops on the inside of a bulb. This is because of: A. The tungsten filament evaporates and collects there B. The heat of the bulb scorches the glass at the top C. Dust inside the bulb condenses on the top D. Glass undergoes a change due to the heat

Last Answer : ANSWER: A

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : (3) dust inside the bulb condenses on the top Explanation: At high operating temperatures, tungsten evaporates from the filament and gradually forms a gray film on the inside of the bulb. The inert ... spot develops in the filament. When this happens, the filament will break and the bulb fails.

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : dust inside the bulb condenses on the top

Description : Melting temperature of DNA is the temperature at which (A) Solid DNA becomes liquid (B) Liquid DNA evaporates (C) DNA changes from double helix into supercoiled DNA (D) Native double helical DNA is denatured

Last Answer : Answer : D

Description : Do all propane tanks have a relief valve?

Last Answer : Propane tanks are required to have a safety relief valve. The relief valve is a safety device on the propane tank to vent excess pressure.

Description : The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom ... /are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Last Answer : Ans:(a)

Description : Plants are killed in winter by frost because (a) No photosynthesis occurs at low temperature (b) Of desiccation (c) Water in the plants freezes (d) Water in the plants evaporates

Last Answer : Ans:(b)

Description : During hot weather, the fan produces a feeling of comfort. This is because – (1) fan supplies cool air (2) fan cools the air (3) our perspiration evaporates rapidly (4) conductivity of air increases

Last Answer : (3) our perspiration evaporates rapidly Explanation: Fans make the air more comfortable for two reasons: (1) by moving the air, they blow away body heat and evaporate sweat, cooling the body, and (2) they also mix the cooler air near the floor with the warmer air by people's faces.

Description : When hot-water is sprinkled on a hotter glass tumbler, it breaks because – (1) glass suddenly expands (2) glass suddenly contracts (3) water evaporates (4) glass reacts chemically with water

Last Answer : (2) glass suddenly contracts Explanation: If the poured liquid is relatively hotter or colder in comparison to the tumbler, it will break. When hot water is poured into a tumbler there is an uneven increase in the thermal expansion of the walls of the vessel.

Description : When hot-water is sprinkled on a hotter glass tumbler, it breaks because (1) glass suddenly expands (2) glass suddenly contracts (3) water evaporates (4) glass reacts chemically with water

Last Answer : glass suddenly contracts

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

Description : Which is the best position for operating the mouse? A. Tail away from the user B. Tail facing the right C. Tail facing the left D. Tail towards the user

Last Answer : D. Tail towards the user

Description : Is charcoal briquettes on barbecue solid liquid or gas?

Last Answer : Charcoal briquettes are solids.

Description : Is liquid tree resin hardening into amber physical or chemical change?

Last Answer : Physical... chemically, it's still the same substance,

Description : Is liquid tree resin hardening into amber physical or chemical change?

Last Answer : Physical... chemically, it's still the same substance,

Description : Is cracking open an egg physical or chemical change?

Last Answer : Physical

Description : I would like to know if there is anyone else out there who evaporates their tap water of chlorine for drinking purposes?

Last Answer : answer:I've recently been looking into the effects of chlorinated tap water on vegetable plants. One interesting point I found was that the typically mentioned 24 hour period to evaporate the chlorine was a ... the air-at least not at my house. Maybe putting the container in the oven would help.

Description : How does iron evaporates?

Last Answer : Need answer

Description : What Source of most water that evaporates from Earth's surface?

Last Answer : Water is evaporated from oceans, seas, lakes, rivers.

Description : What is it called when water evaporates from the leaves of the plant?

Last Answer : This phenomenon is called transpiration.

Description : What happens when lemonade evaporates?

Last Answer : Feel Free to Answer

Description : What Source of most water that evaporates from earths surface?

Last Answer : Water is evaporated from oceans, seas, lakes, rivers.

Description : A substance that evaporates at room temperature is described as __________. What word completes the sentence?

Last Answer : Gas

Description : Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? [CSAT 2011] (a) It greatly increases ... c) It raises the water table (d) It fills the air spaces in the soil with water

Last Answer : Ans: (b)

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

Description : Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? a. It greatly increases the crop ... c. It raises the water table d. It fills the air spaces in the soil with water

Last Answer : b. It may lead to crop yield loss

Description : How does Liquid Propane turn into gas?

Last Answer : Liquid propane turns to gas by a process known as vaporization, in which liquid propane is boiled to turn liquid into gas vapor.

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

Description : Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Last Answer : (C) Liquid SO2

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Description : Casing head gasoline is the liquid (A) Butane (B) Propane (C) Natural gas (D) Gasoline separated from wet natural gas by compression

Last Answer : (A) Butane

Description : Which of the following is the best description of propane, CH3CH2CH3, at room temperature? (a) liquid, soluble in H2O (b) gas, soluble in gasoline (c) liquid, soluble in gasoline (d) gas, soluble in water

Last Answer : gas, soluble in gasoline

Description : Which of the following regarding the anatomy of the heart is true? A. The aortic valve is tricuspid. B. The ascending aorta is entirely outside the pericardial sac. C. The left atrial appendage is ... trunk lies anterior to the ascending aorta. E. The right atrium is posterior to the left atrium.

Last Answer : Ans: A

Description : To which heart chamber does the blood go after leaving the left atrium? What is the valve that separates these compartments?

Last Answer : The arterial blood that has come from the lungs to the left atrium passes then to the left ventricle. The valve between the left ventricle and the left atrium is the mitral valve, a ... left atrium during systole (contraction of the ventricles). The Circulatory System - Image Diversity: mitral valve

Description : Tricuspid valve is found in between (a) sinus venosus and right auricle (b) right auricle and right ventricle (c) left ventricle and left auricle (d) ventricle and aorta.

Last Answer : b) right auricle and right ventricle

Description : If due to some injury the chordae tendinae of the tricuspid valve of the human heart is partially non- functional, what will be the immediate effect? (a) The flow of blood into the aorta will be slowed ... back into the left atrium. (d) The flow of blood into the pulmonary artery will be reduced.

Last Answer : (d) The flow of blood into the pulmonary artery will be reduced.

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II A. Tricuspid valve (i) Between left atrium and left ventricle B. Bicuspid valve (ii) Between right ventricle and ... (b) (i) (iii) (ii) (c) (i) (ii) (iii) (d) (ii) (i) (iii)

Last Answer : (a) (iii) (i) (ii)

Description : Match the items given in Column I with those in Column II and select the correct option given below: Column I Column II a. Tricuspid valve i. Between left atrium and left ventricle b. Bicuspid valve ii. Between right ventricle and ... a b c (1) iii i ii (2) i iii ii (3) i ii iii (4) ii i iii

Last Answer : (1) iii i ii

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d