. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

. An evaporator while concentrating an aqueous solution from 10 to

40% solids evaporates 30000 kg of water. The amount of solids handled by

the system in kg is

(A) 4000

(B) 9000

(C) 4600

(D) 3000

by

1 Answer

Answer :

(A) 4000

by

Related questions

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. The kg of water removed from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Description : Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. ... from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Last Answer : (D) 0.7

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Description : The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Last Answer : (D) 4000

Salaries Rs.20000,depreciation for the period is Rs.30000 other operating expenses are Rs.9000, net loss for the period is Rs.5000 fund generated from operation is------------------ a) Rs.25000 b) Rs.15000 c) Rs.35000 d) Rs.14000

Description : Salaries Rs.20000,depreciation for the period is Rs.30000 other operating expenses are Rs.9000, net loss for the period is Rs.5000 fund generated from operation is------------------ a) Rs.25000 b) Rs.15000 c) Rs.35000 d) Rs.14000

Last Answer : a) Rs.25000

Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Description : A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Last Answer : (A) Higher economy

Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Description : Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Last Answer : (B) Viscous

1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Last Answer : (C) 0.2

A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Last Answer : (D) 10000 to 100000

The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Last Answer : (b) 37.29 kN

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

Number of weed species identified in the world a). 30 b). 300 c). 3000 d). 30000

Description : Number of weed species identified in the world a). 30 b). 300 c). 3000 d). 30000

Last Answer : d). 30000

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Description : Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Last Answer : (B) 2100

Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Description : Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Last Answer : (A) +4000

A sum of 12600 is to be distributed between A, B and C. For every rupee A gets, B gets 80p and for every rupee B gets, C get 90 paise. Find the amount get by C. A) 3200 B) 3600 C) 4200 D) 4600 E) None of these

Description : A sum of 12600 is to be distributed between A, B and C. For every rupee A gets, B gets 80p and for every rupee B gets, C get 90 paise. Find the amount get by C. A) 3200 B) 3600 C) 4200 D) 4600 E) None of these

Last Answer : Answer: B Ratio of money between A and B – 100:80 and that of B and C – 100:90 so the ratio between A : B :C – 100:80:72 so 252x = 12600, x = 50. So C get = 50*72 = 3600

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A 12.32 Hz B 4.10 Hz C 6.16 HzD None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A 12.32 Hz B 4.10 Hz C 6.16 HzD None of the above

Last Answer : C 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A. 12.32 Hz B. 4.10 Hz C. 6.16 Hz D. None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A. 12.32 Hz B. 4.10 Hz C. 6.16 Hz D. None of the above

Last Answer : C. 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A) 12.32 Hz B) 4.10 Hz C) 6.16 Hz D) None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A) 12.32 Hz B) 4.10 Hz C) 6.16 Hz D) None of the above

Last Answer : C) 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? C ( A )12.32 Hz (B) 4.10 Hz ( C )6.16 Hz (D)None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? C ( A )12.32 Hz (B) 4.10 Hz ( C )6.16 Hz (D)None of the above

Last Answer : ( C )6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m mass of 20 kg? a. 12.32 Hz b. 4.10 Hz c. 6.16 Hz d. None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m mass of 20 kg? a. 12.32 Hz b. 4.10 Hz c. 6.16 Hz d. None of the above

Last Answer : c. 6.16 Hz

Indus civilisation developed around: A. 3000 BC B. 3500 BC C. 3600 BC D. 4000 BC

Description : Indus civilisation developed around: A. 3000 BC B. 3500 BC C. 3600 BC D. 4000 BC

Last Answer : ANSWER: A

In EDSAC, an addition operation was completed in _____ micro seconds. (A) 4000 (B) 3000 (C) 2000 (D) 1500

Description : In EDSAC, an addition operation was completed in _____ micro seconds. (A) 4000 (B) 3000 (C) 2000 (D) 1500

Last Answer : (D) 1500

Elevation of temperate region from sea level ranges: a. 1000-2000 m b. 2500-3000 m c. 3500-4000 m d. b & c

Description : Elevation of temperate region from sea level ranges: a. 1000-2000 m b. 2500-3000 m c. 3500-4000 m d. b & c

Last Answer : b & c

The conductivity of a material with current density 1 unit and electric field 200 μV is a) 2000 b) 3000 c) 4000 d) 5000

Description : The conductivity of a material with current density 1 unit and electric field 200 μV is a) 2000 b) 3000 c) 4000 d) 5000

Last Answer : d) 5000

Roundabouts are not suitable if number of vehicles exceed (A) 3000 (B) 4000 (C) 5000 (D) 6000

Description : Roundabouts are not suitable if number of vehicles exceed (A) 3000 (B) 4000 (C) 5000 (D) 6000

Last Answer : Answer: Option A

The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs 10000 b) Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Description : The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs ... Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Last Answer : Let the incomes of two persons be 5x and 4x let the expenditures of them be 9y and 7y Each person saves Rs. 500 Therefore, 5x - 9y = 500 4x - 7y = 500 Solving the above equations, 20x - 36y = 2000 20x - ... = 500 + 9(500) = 5000 X = 1000 Hence, their salaries are Rs. 5000 and Rs. 4000 Answer: c)

The difference between the cost price and sale price of an article is Rs. 500 if the profit is 20%. The selling price is: A. Rs 4000 B. Rs 1500 C. Rs 3000 D. Rs 3300

Description : The difference between the cost price and sale price of an article is Rs. 500 if the profit is 20%. The selling price is: A. Rs 4000 B. Rs 1500 C. Rs 3000 D. Rs 3300

Last Answer : Answer – C. Rs.3000 Explanation – 120%-100%=20% 20%…………………500 120%…………….? ?=3000

Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Last Answer : (b) 2000

Ravi, Rakesh and Vijay invest in a partnership in the ratio 7/2, 4/3, 6/5 respectively. After 4 months, Ravi increases his share 50%. If the total profit at the and of one year be Rs. 32,400, then what is Rakesh's share in the profit? 1) Rs. 2000 2) Rs. 3000 3) Rs. 4000 4) Rs. 5000 5) Rs. 6000

Description : Ravi, Rakesh and Vijay invest in a partnership in the ratio 7/2, 4/3, 6/5 respectively. After 4 months, Ravi increases his share 50%. If the total profit at the and of one year be Rs. 32,400, then what is Rakesh's ... the profit? 1) Rs. 2000 2) Rs. 3000 3) Rs. 4000 4) Rs. 5000 5) Rs. 6000

Last Answer : 5) Rs. 6000

As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Description : As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Last Answer : A. More than 2000

. The three-stage Agni-V has a range of (a) 2000 KM (b) 3000 KM (c) 4000 KM (d) 5000 KM

Description : . The three-stage Agni-V has a range of (a) 2000 KM (b) 3000 KM (c) 4000 KM (d) 5000 KM

Last Answer : (d) 5000 KM

Keerthi and Kavi invest in a business in the ratio 7:5. If 10% of the total profit goes to charity and Keerthi’s share is Rs.2625 the total profit is. A) 5000 B) 2000 c) 3000 D) 4000

Description : Keerthi and Kavi invest in a business in the ratio 7:5. If 10% of the total profit goes to charity and Keerthi’s share is Rs.2625 the total profit is. A) 5000 B) 2000 c) 3000 D) 4000

Last Answer : Answer: A) Let the total profit be Rs.100 After playing to charity, keethi’s share = Rs(90 * 7/12) =Rs.52.5 If keerthi’s sghare is Rs.52.5 total profit = Rs 100 If keerthi’s share is Rs. 2625 Total profit = (100/52.5 *2625) =Rs.5000

In a business, X,Y and Z inversed Rs.20,000/-,Rs.30,000/- and Rs.40,000/- respectively. After 1 year X adds Rs.10000/- to the initial investment.Y and Z withdrew Rs.10000/- and Rs.15,000/- respectively. After 2 years the total profit is Rs.9900/-. What is X’s share?. A) 3000 B) 2700 C) 3600 D) 4000

Description : In a business, X,Y and Z inversed Rs.20,000/-,Rs.30,000/- and Rs.40,000/- respectively. After 1 year X adds Rs.10000/- to the initial investment.Y and Z withdrew Rs.10000/- and Rs.15,000/- respectively. After 2 years the total profit is Rs.9900/-. What is X’s share?. A) 3000 B) 2700 C) 3600 D) 4000

Last Answer : Answer: A)  X's Share = Rs.20000/- per first 1 year, Next year 10000/- added = Rs.20000/- 1 + Rs.30000/- 1 = Rs.50000/- Y's Share = Rs.30000/- per first 1 year, Next year 10000/- reduced = Rs.30000 ... /-  1 part------> Rs300/- Then, X's share is 10 parts = Rs.300/- 10 parts = Rs.3000/-

At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total

Description : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is :  (A) 7000 W (B) 6000 W (C) 8000 W (D) 4000 W

Last Answer : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is : 6000 W

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5]

Description : An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5] 

Last Answer : Weight of NaCl = 10 kg Weight of H2O = 50 kg Total weight = 60 kg Weight % of NaCl = (10/ 60) * 100 =16.67% Weight % of H2O = (50/ 60) * 100 = 83.33% Molecular weight of NaCl = 58.5 k moles of NaCl ... 100 = 5.79% Mol % of H2O = (moles of H2O / Total moles)*100  = (2.78/ 2.949)*100 = 94.26%

Density of water in kg m-3 is A. 1000 B. 100 C. 10 000 D. 4000

Description : Density of water in kg m-3 is A. 1000 B. 100 C. 10 000 D. 4000

Last Answer : 1000

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

What is the hydraulic oil capacity for a 4600 ford tractor?

Description : What is the hydraulic oil capacity for a 4600 ford tractor?

Last Answer : Need answer

The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J (B) 4600 J (C) 230 J (D) 2.3 × 106 J

Description : The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J (B) 4600 J (C) 230 J (D) 2.3 × 106 J

Last Answer : A) 2300 J

A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Description : A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Last Answer : c. 3200 psi