What is 456.72 plus 83.68?

What is 456.72 plus 83.68?
by

1 Answer

Answer :

456.72+83.68-------------540.40
by
selected by

Related questions

What number completes this 107 98 90 83 77 68 65?

Description : What number completes this 107 98 90 83 77 68 65?

Last Answer : 72difference decreases by 1 each time9 = 107 - 988 = 98 - 907 = 90 - 836 = 83 - 775 = 77 - 724 = 72 - 683 = 68 - 65

Nusselt number for full developed, laminar, constant property flow in a pipe at uniform heat flux is (A) 0.72 (B) 4.364 (C) 18 (D) 83

Description : Nusselt number for full developed, laminar, constant property flow in a pipe at uniform heat flux is (A) 0.72 (B) 4.364 (C) 18 (D) 83

Last Answer : (B) 4.364

The average age of Anu, banu and tonu is 74 yrs. 10years hence the average age of anu and tonu is 86 yrs.6yrs ago the average age of aarthi and banu was 72 yrs. Find the present age of aarthi. A) 80 B) 86 C) 84 D) 83

Description : The average age of Anu, banu and tonu is 74 yrs. 10years hence the average age of anu and tonu is 86 yrs.6yrs ago the average age of aarthi and banu was 72 yrs. Find the present age of aarthi. A) 80 B) 86 C) 84 D) 83

Last Answer : B) anu+ banu+ tonu = 74 * 3 = 222yrs 10yrs hence, anu + 10 + tonu +10 = 86 * 2 anu + tonu= 152 banu = 222-152 = 70 yrs aarthi -6 + banu - 6= 72 * 2 aarthi + banu = 144 + 12 = 156 aarthi age = 156-70 aarthi age = 86yrs

How many assembly segments are there as per Vidhan Sabha Elections 2013 in Delhi? (1) 70 (2) 72 (3) 66 (2) 68

Description : How many assembly segments are there as per Vidhan Sabha Elections 2013 in Delhi? (1) 70 (2) 72 (3) 66 (2) 68

Last Answer : (1) 70 Explanation: The Legislative Assembly of Delhi, also known as Delhi Vidhan Sabha, is made up of 70 members. It is a unicameral law making body of the National Capital Territory of Delhi, one of the 7 union territories in India.

A wall of the firebrick has an inside temperature of 313ºF and an outside temperature of 73ºF. What is the difference in the surface temperature in Rankin?  a. 70  b. 68  c. 72  d. 94 ºR = ºF + 460

Description : A wall of the firebrick has an inside temperature of 313ºF and an outside temperature of 73ºF. What is the difference in the surface temperature in Rankin?  a. 70  b. 68  c. 72  d. 94 ºR = ºF + 460

Last Answer : 70

53 × 47 + 64 × 56 -72 × 68 = ? a) 1221 b) 1403 c) 1249 d) 1337 e) 1179

Description : 53 × 47 + 64 × 56 -72 × 68 = ? a) 1221 b) 1403 c) 1249 d) 1337 e) 1179

Last Answer : Answer: e)

Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Description : Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Last Answer : a. 72 to 75

A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the certain place. What is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Description : A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the ... is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Last Answer : B Let speed of the jeep =x kmph Then, speed of the bus =(100+25)x/100 =125x/100 =5x/4 kmph Time taken by the jeep to travel from P to Q =225/x hours Time taken by the bus to travel from p to Q =225/(5x/4) + ... 225/x=900/5x+37.5/60 225/x=180/x+37.5/60 45/x =37.5/60 37.5x=45*60 X=72 km/hr

The ratio of the number of boys to the number of girls in a school is 6 : 5. If 20% of boys and 45% of girls come by bus to school, what percentage of students opt transport other than bus to come to school? A) 68 9/11% B) 68 7/11% C) 72 7/11% D) 73% E) 73 5/11%

Description : The ratio of the number of boys to the number of girls in a school is 6 : 5. If 20% of boys and 45% of girls come by bus to school, what percentage of students opt transport other than bus to come to school? A) 68 9/11% B) 68 7/11% C) 72 7/11% D) 73% E) 73 5/11%

Last Answer : Answer: B If 20% of boys and 45% of girls come by bus, then 80% of boys and 55% of girls opt transport other than bus. Let total number of students in school = x So boys who opt other transport are (80/100) * 6/(6+5 ... (24x/55) + (x/4) = 151x/220 So required % = [(151x/220)/x] * 100 = 68 7/11 %

The average age of 160 boys in a class is 58 yrs. The average group of 30 boys in the class is 42 yrs and the average of another group of 50 boys in the class is 36 years. What is the average age of the remaining boys? A) 72.58 B) 74.25 C) 77.75 D) 75.68

Description : The average age of 160 boys in a class is 58 yrs. The average group of 30 boys in the class is 42 yrs and the average of another group of 50 boys in the class is 36 years. What is the average age of the remaining boys? A) 72.58 B) 74.25 C) 77.75 D) 75.68 

Last Answer : C) Total age of 160 boys = 160* 58= 9280 total age of 30 boys = 30 * 42= 1260 total age of next 50boys = 50 * 36= 1800 average of the remaining boys = [(9280-{1260+1800})/[160 - (30 + 50)] =>9280-3060/80 =>6220/80 =77.75yrs

What are the most useful tools and/or fun games for the TI-83 Plus?

Description : What are the most useful tools and/or fun games for the TI-83 Plus?

Last Answer : For games, I liked tetris and the built-in Puzzle Pack. There are apps to solve specific problems (e.g you use quadriat to solve problems with quadratic) . TiCalc has an amazing collection of ... memory on the TI-83 (because then the calculator becomes really slow and it takes forever to graph)

Is y-83 plus x7 linear or nonlinear?

Description : Is y-83 plus x7 linear or nonlinear?

Last Answer : linear

What is 72 80 plus 70 80 in simplest form?

Description : What is 72 80 plus 70 80 in simplest form?

Last Answer : 142/80

What expression is equivalent (72 plus 9)?

Description : What expression is equivalent (72 plus 9)?

Last Answer : 9(8 + 1)

Have i seen the " 456 " before ?

Description : Have i seen the " 456 " before ?

Last Answer : They were called the Ambassadors of Death in Doctor Who, but 1970 was a while ago. If you were thinking of a more recent creature who looked similiar, there were shadow creatures called the Vashta ... Library and they took over a couple of people's bodies inside their space suit. Looked similiar.

What is the refractive index of sound 1.456?

Description : What is the refractive index of sound 1.456?

Last Answer : The refractive index of sound through alum is 1.456 .

Is 1.456 rational?

Description : Is 1.456 rational?

Last Answer : is 1.456 rational

How do you write 12.456 in word form?

Description : How do you write 12.456 in word form?

Last Answer : It is twelve and four hundred fifty six thousandths.

How do you write 12.456 in word form?

Description : How do you write 12.456 in word form?

Last Answer : It is twelve and four hundred fifty six thousandths.

If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Description : If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Last Answer : Answer: Option D

As per I.S. 456 - 1978, the pH value of water shall be (A) Less than 6 (B) Equal to 6 (C) Not less than 6 (D) Equal to 7

Description : As per I.S. 456 - 1978, the pH value of water shall be (A) Less than 6 (B) Equal to 6 (C) Not less than 6 (D) Equal to 7

Last Answer : Answer: Option C

According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Description : According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option A

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm

Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm

Last Answer : Answer: Option B

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option C

As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area

Description : As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area

Last Answer : Answer: Option D

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

The grade of concrete not recommended by I.S. : 456, is (A) M 100 (B) M 200 (C) M 300 (D) M 500

Description : The grade of concrete not recommended by I.S. : 456, is (A) M 100 (B) M 200 (C) M 300 (D) M 500

Last Answer : (D) M 500

According to I.S. : 456, the number of grades of concrete mixes, is (A) 3 (B) 4 (C) 5 (D) 7

Description : According to I.S. : 456, the number of grades of concrete mixes, is (A) 3 (B) 4 (C) 5 (D) 7

Last Answer : (D) 7

Maximum distance between expansion joints in structures as per IS: 456 1978 is (A) 20 m (B) 30 m (C) 45 m (D) 60 m

Description : Maximum distance between expansion joints in structures as per IS: 456 1978 is (A) 20 m (B) 30 m (C) 45 m (D) 60 m

Last Answer : (C) 45

According to the recommendations of IS : 456-1978, the expansion joints (A) Are provided where plane changes abruptly (B) Are provided to ensure minimum resistance (C) Do not carry reinforcement across them (D) All the above

Description : According to the recommendations of IS : 456-1978, the expansion joints (A) Are provided where plane changes abruptly (B) Are provided to ensure minimum resistance (C) Do not carry reinforcement across them (D) All the above

Last Answer : Answer: Option D

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

The profit earned after selling a Laptop for Rs.1,754/- is the same as loss incurred after selling the article for Rs.1,492/-. What is the cost price of the article? a) Rs. 1,239/- b) Rs. 1,456/- c) Rs. 1,786/- d) Rs. 1,623/- e) Rs. 1,345/-

Description : The profit earned after selling a Laptop for Rs.1,754/- is the same as loss incurred after selling the article for Rs.1,492/-. What is the cost price of the article? a) Rs. 1,239/- b) Rs. 1,456/- c) Rs. 1,786/- d) Rs. 1,623/- e) Rs. 1,345/-

Last Answer : Let the C.P. of a Laptop = Rs. x 1754 - x = x - 1492 2x = 3246 x = 3246 / 2 = 1623 Answer: d)

The speed of a car increases by 2 kms after every one hour. If the distance travelled in the first one hour was 35 kms, what was the total distance traveled in 12 hours? A.456 kms B.482 kms C.552 kms D.556 kms E.None of these

Description : The speed of a car increases by 2 kms after every one hour. If the distance travelled in the first one hour was 35 kms, what was the total distance traveled in 12 hours? A.456 kms B.482 kms C.552 kms D.556 kms E.None of these

Last Answer : Answer – C (552 kms) Explanation – Total distance travelled in 12 hours = (35 + 37 + 39 + …… upto 12 terms) This is an A.P. with first term, a = 35, number of terms, n = 12, common difference, d =2. Required distance =12/2 (2 x 35 + (12 – 1) x 2) = 6(70 + 22) = 552 kms

According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Description : According to IS 456, minimum slenderness ratio for a short concrete column is (a) Less than 12 (b) Between 12 and 18 (c) Between 18 and 24 (d) More than 24

Last Answer : (a) Less than 12

As per IS :456-1978, the permissible value of bond – stress for M15 grade of concrete is (a) 0.5 N/mm2 (b) 1 N/mm2 (c) 1.5 N/mm2 (d) 2 N/mm2

Description : As per IS :456-1978, the permissible value of bond – stress for M15 grade of concrete is (a) 0.5 N/mm2 (b) 1 N/mm2 (c) 1.5 N/mm2 (d) 2 N/mm2

Last Answer : (b) 1 N/mm2

According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Description : According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Last Answer : (a) Equal to

Which of the following grade is not recommended by IS 456-1978? (a) M10 (b) M20 (c) M40 (d) M55

Description : Which of the following grade is not recommended by IS 456-1978? (a) M10 (b) M20 (c) M40 (d) M55

Last Answer : (d) M55

As per IS:456-1978, the concrete mixes are designated into (a) 4 grades (b) 5 grades (c) 6 grades (d) 7 grades

Description : As per IS:456-1978, the concrete mixes are designated into (a) 4 grades (b) 5 grades (c) 6 grades (d) 7 grades

Last Answer : (d) 7 grades

According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Last Answer : [ A ] Less than 12

Which of the following method that is used to taken into account the slenderness effect of columns according to IS:456 - 2000 [ A ] Reduction coefficient method [ B ] Slenderness method [ C ] Moment magnification method [ D ] None of the above

Description : Which of the following method that is used to taken into account the slenderness effect of columns according to IS:456 - 2000 [ A ] Reduction coefficient method [ B ] Slenderness method [ C ] Moment magnification method [ D ] None of the above

Last Answer : [ A ] Reduction coefficient method

According to IS:456, the diameter of the helices in circular a column shall be at least [ A ] The diameter of longitudinal steel [ B ] One-half the diameter of longitudinal steel [ C ] One-fourth the diameter of longitudinal steel [ D ] Three-fourth the diameter of longitudinal steel

Description : According to IS:456, the diameter of the helices in circular a column shall be at least [ A ] The diameter of longitudinal steel [ B ] One-half the diameter of longitudinal steel [ C ] One-fourth the diameter of longitudinal steel [ D ] Three-fourth the diameter of longitudinal steel

Last Answer : [ C ] One-fourth the diameter of longitudinal steel

According to IS: 456 -2000, the spacing of links in a Column should be less than [ A ] 16 x diameter of smallest longitudinal bar [ B ] 24 x diameter of smallest longitudinal bar [ C ] 48 x diameter of smallest longitudinal bar [ D ] 48 x diameter of greatest longitudinal bar

Description : According to IS: 456 -2000, the spacing of links in a Column should be less than [ A ] 16 x diameter of smallest longitudinal bar [ B ] 24 x diameter of smallest longitudinal bar [ C ] 48 x diameter of smallest longitudinal bar [ D ] 48 x diameter of greatest longitudinal bar

Last Answer : [ A ] 16 x diameter of smallest longitudinal bar

In any case, the minimum diameter of the link in a column, according to IS:456-2000 is [ A ] 5 mm [ B ] 6 mm [ C ] 8 mm [ D ] 10 mm

Description : In any case, the minimum diameter of the link in a column, according to IS:456-2000 is [ A ] 5 mm [ B ] 6 mm [ C ] 8 mm [ D ] 10 mm

Last Answer : [ B ] 6 mm

According to IS:456-2000, the minimum eccentricity in no case [ A ] Shall be not less than 20mm [ B ] Shall be not greater than 30mm [ C ] Shall be 20mm-30mm [ D ] None of the above

Description : According to IS:456-2000, the minimum eccentricity in no case [ A ] Shall be not less than 20mm [ B ] Shall be not greater than 30mm [ C ] Shall be 20mm-30mm [ D ] None of the above

Last Answer : [ A ] Shall be not less than 20mm

Permissible width of crack at the surface of concrete for „moderate‟ environmental conditions according to IS : 456-2000 is [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Description : Permissible width of crack at the surface of concrete for „moderate‟ environmental conditions according to IS : 456-2000 is [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Last Answer : [ B ] 0.2 mm

According to IS: 456-2000 the ultimate moment of resistance of a slab for Fe - 415 HYSD bars is; [ A ] Mu = 0.138 fck bd2 [ B ] Mu = 0.145 fck bd2 [ C ] Mu = 0.152 fck bd2 [ D ] Mu = 0.165 fck bd2

Description : According to IS: 456-2000 the ultimate moment of resistance of a slab for Fe - 415 HYSD bars is; [ A ] Mu = 0.138 fck bd2 [ B ] Mu = 0.145 fck bd2 [ C ] Mu = 0.152 fck bd2 [ D ] Mu = 0.165 fck bd2

Last Answer : [ A ] Mu = 0.138 fck bd2

According to IS: 456-2000, the span/overall depth ratio for a continuous two-way slab in order to control deflection is given by [ A ] 20 [ B ] 28 [ C ] 32 [ D ] 40

Description : According to IS: 456-2000, the span/overall depth ratio for a continuous two-way slab in order to control deflection is given by [ A ] 20 [ B ] 28 [ C ] 32 [ D ] 40

Last Answer : [ C ] 32

The span/over all depth ratio for a simply supported two-way slab according to IS : 456- 2000 is given by

Description : The span/over all depth ratio for a simply supported two-way slab according to IS : 456- 2000 is given by [ A ] 20 [ B ] 28 [ C ] 32 [ D ] 40

Last Answer : [ B ] 28

According to IS : 456-2000, clause 39.4, stirrups should be provided for a shear of [ A ] at least 75% [ B ] at least 50% [ C ] at least 25 % [ D ] none of the above.

Description : According to IS : 456-2000, clause 39.4, stirrups should be provided for a shear of [ A ] at least 75% [ B ] at least 50% [ C ] at least 25 % [ D ] none of the above.

Last Answer : [ B ] at least 50%