How do i identify the engine casting 3914678?

How do i identify the engine casting 3914678?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

Identify the causes of generating blow holes and misrun in casting and also suggest remedies to avoid them.

Description : Identify the causes of generating blow holes and misrun in casting and also suggest remedies to avoid them.

Last Answer : Answer: 1) Blowholes: Causess: Excessive moisture in the sand, or when permeability of sand is low, sand grains are too fine, sand is rammed too hard, or when venting is insufficient. ... gating Remedies : Adjust proper pouring temperature Modify design Modify gating system. 

Name the alloy used for casting engine parts?

Description : Name the alloy used for casting engine parts?

Last Answer : Silumin

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

Should casting be color-blind?

Description : Should casting be color-blind?

Last Answer : As you noted, it depends on the material. There are stories where race/ethnicity are central to the plot. There are others where it makes no difference. And, there are instances where not strictly adhering to a racial make up enhances the story in an alternative way, such as in Hamilton.

Are today's "casting shows" the modern freak shows?

Description : Are today's "casting shows" the modern freak shows?

Last Answer : I don’t watch any of them but it always amazes me, when I do political endorsing for my job, that most people seem to know more about who is winning on AGT than they know who their political representatives are or what branch of local government is responsible for what.

California voters: are you casting your vote in the primary on June 5th?

Description : California voters: are you casting your vote in the primary on June 5th?

Last Answer : Yep. I vote at every election.

What would be some examples of bad casting?

Description : What would be some examples of bad casting?

Last Answer : Charlie Sheen as Puff the magic dragon, or anything really.

Is casting raise dead twice a potential cure for a vampire?

Description : Is casting raise dead twice a potential cure for a vampire?

Last Answer : Technically, a vampire isn’t dead. It is undead.

Casting your mind back to your school days, which teachers had memorable names?

Description : Casting your mind back to your school days, which teachers had memorable names?

Last Answer : My brother had a first grade teacher named Mrs Outhouse, her real name. I had a fourth grade teacher named Mrs Diapher, but we all called her Mrs Diaper and she never corrected us on it.

How much investment would it take to set up a small leaged crystal manufacturing and casting facility?

Description : How much investment would it take to set up a small leaged crystal manufacturing and casting facility?

Last Answer : ETpro, if you are serious, check out information on the US Small Business Administration webpage. There are mentors available to help you create a business plan and get funding. It is even easier if you are a woman or a disadvantaged or minority.

Fear Factor is back on NBC and casting NOW!

Description : Fear Factor is back on NBC and casting NOW!

Last Answer : I guess I’d eat goat testicles and jump off speeding rig trucks for that much money. Always thought it was a stupid show, but I might check it out anyways, even if by accident. XD

How does one use resin in casting?

Description : How does one use resin in casting?

Last Answer : There is a well-known supplier of materials for casting, Polytek , that is a good resource both for supplies and information. They have several videos on their own YouTube channel that demonstrate various processes. That might be a good place to start.

Are there any good websites that can notify if there are casting calls?

Description : Are there any good websites that can notify if there are casting calls?

Last Answer : On a MUCH smaller scale, people often advertise casting calls on Craigslist in the Community, Jobs, and Services sections.

Remember those wax casting amusement park vending machines?

Description : Remember those wax casting amusement park vending machines?

Last Answer : I remember those. And the penny stretching machines. I don’t know what they called them, though… I’ll put on my thinking cap.

Can anyone explain to me why there is a connection in casting between the shows Boston Legal and Startrek?

Description : Can anyone explain to me why there is a connection in casting between the shows Boston Legal and Startrek?

Last Answer : William Shatner?

Do you have an opinion on "America's Next Top Model" casting models 5'7" and under this season?

Description : Do you have an opinion on "America's Next Top Model" casting models 5'7" and under this season?

Last Answer : Hum… how many actual “top models” are under 5’7”? I’m not questioning if the industry’s standard of beauty should be changed

Go to important casting or friend's birthday?

Description : Go to important casting or friend's birthday?

Last Answer : answer:If she is a true friend she would understand. If this casting is important for you to be there I am sure she wouldn't want you to miss it. Since it is a day-time thing can you change the time, ... talk to her tell her what's going on. Give her a heads up in advance. Don't wait last minute.

Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Last Answer : c.Laser-Engineered Net Shaping

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Who exercises a casting vote in case of a tie in the Lok Sabha? -SST 10th

Description : Who exercises a casting vote in case of a tie in the Lok Sabha? -SST 10th

Last Answer : In case of a tie in the Lok Sabha, the Speaker exercises a casting vote.

Long distance short-wave radio broad casting uses which waves? -Do You Know?

Description : Long distance short-wave radio broad casting uses which waves? -Do You Know?

Last Answer : answer:

Are You in The Search of Leading Stainless Steel Casting Manufacturers in India?

Description : Are You in The Search of Leading Stainless Steel Casting Manufacturers in India?

Last Answer : The renowned Class-A certified stainless steel casting manufacturers in India, Sujan Industries, has its own large plants situated around 30,000 sq.ft area and it is armoured with the latest ... in-house laboratory and deliver it to the industries like Aerospace, Defence, Heavy Vehicle, Rail

What is Casting Vote ?

Last Answer : Casting Vote is the vote of the Speaker if there is an equal vote against or against a motion in Parliament .

what should I do if I went to an alleged casting modeling for an English photographer and the photo was to remain on foreign sites and is on Czech?

Description : I need help, advice anything. I was at the casting and my photos were maximally misused ... I need to find some skating so that everything can be downloaded from the internet

Last Answer : If you have proof of the misuse of your person's photos by publishing them on the Internet, file a criminal complaint with the Police of the Czech Republic.

What to make a mold for tin casting?

Description : I have an idea for a business. I'd like to cast such tin stuff. But I don't know what form. Something that can withstand the cooling of molten tin. Wood probably isn't suitable huh?

Last Answer : we cast chess pieces in modurite molds and others such as the bow at the shooter we made from the tube here painted Balakryl, then we cast about 100 soldiers we always had 1 pattern for each piece, ... napady / odlevani-z-cinu_-tvorba-formy.html http://www.militaria.cz/archiv/391/clanky/391-13.html

The chairman has the right of casting vote.

Description : The chairman has the right of casting vote.

Last Answer : Justify the following statement. The chairman has the right of casting vote.

The element is used in locating defect in steel casting is

Description : The element is used in locating defect in steel casting is

Last Answer : The element is used in locating defect in steel casting is A. He B. Kr C. Xe D. Rn

What is the Small block casting number 3978010?

Description : What is the Small block casting number 3978010?

Last Answer : motor #3978010

What type of cylinder heads are casting 8796896?

Description : What type of cylinder heads are casting 8796896?

Last Answer : Feel Free to Answer

What are some industrial uses for zinc die casting?

Description : What are some industrial uses for zinc die casting?

Last Answer : Some industrial uses for zinc die casting include measuring instruments, appliances and power tools. The most common use is for a vehicles power train.

Where can I track live casting calls in the Los Angeles area?

Description : Where can I track live casting calls in the Los Angeles area?

Last Answer : www.nbc.com/casting lists theirs as does abc.go.com/site/casting you can also check realityshows.com/castingcalls.htm

I'm a new actor. What do I need to be prepared for a casting call?

Description : I'm a new actor. What do I need to be prepared for a casting call?

Last Answer : You'll want to research the production company. If you know what shows they've produced you'll have more to say in the interview. Have a headshot with your resume printed on the back, and make sure it' ... Acting Tips at Life Tips. They give a lot of information on how to succeed in a casting call.

When pip met orlick at miss havishama ,pip asked him how long it had been since he left gargerys forge ."one day is so like another here ." He replied, "that i domt know without casting it up"what does casting it up mean in this sentence?

Description : When pip met orlick at miss havishama ,pip asked him how long it had been since he left gargerys forge ."one day is so like another here ." He replied, "that i domt know without casting it up"what does casting it up mean in this sentence?

Last Answer : Pip wanted to stay in the Satis House because he wanted to be a part of higher social class. Pip felt like he and his family were too common, and he wanted to be different and wealthy.

What is the difference between molding and casting?

Description : What is the difference between molding and casting?

Last Answer : The very first process is pattern making. After it the cavity is made which is exactly opposite of shape of Casting which is to be produced. This process of making cavity is called Moulding. And pouring the molten metal to produce desired shape is called Casting.

The speaker’s vote in the Lok Sabha is called - (1) Casting vote (2) Sound vote (3) Direct vote (4) Indirect vote

Description : The speaker’s vote in the Lok Sabha is called - (1) Casting vote (2) Sound vote (3) Direct vote (4) Indirect vote

Last Answer : (1) Casting vote Explanation: The speaker’s vote in the Lok Sabha is called casting vote. A casting vote is a vote given to the presiding officer of a council or legislative body to resolve a deadlock and which can be exercised only when such a deadlock exists.

The 'Speaker's vote' in the Lok Sabha is called – (1) casting vote (2) sound vote (3) direct vote (4) indirect vote

Description : The 'Speaker's vote' in the Lok Sabha is called – (1) casting vote (2) sound vote (3) direct vote (4) indirect vote

Last Answer : (1) casting vote Explanation: Normally, the Speaker does not take part in voting in the House. But in case of a tie, he exercises his right of casting vote. His casting vote would decide the issue. In such ... the removal of the Speaker is put to vote in the House, he has the right to cast his vote.

Sending a frame to a group of stations is known as – (1) Single casting (2) Spreading (3) Multicasting (4) Casting

Description : Sending a frame to a group of stations is known as – (1) Single casting (2) Spreading (3) Multicasting (4) Casting

Last Answer : (3) Multicasting Explanation: In addition to transmitting frames directed to a single address, local area networks are capable of sending frames directed to a group of address, called a multicast ... group of stations. They can also send frames directed to all stations using the broadcast address.

The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

Long distance short-wave radio broad casting uses which waves?

Description : Long distance short-wave radio broad casting uses which waves?

Last Answer : Ionospheric wave

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

Zinc is not used (A) For producing zinc base die casting alloys (B) In its oxide form as pigments (C) As anode for corrosion prevention in boiler (D) As an alloying element in various bronzes

Description : Zinc is not used (A) For producing zinc base die casting alloys (B) In its oxide form as pigments (C) As anode for corrosion prevention in boiler (D) As an alloying element in various bronzes

Last Answer : (D) As an alloying element in various bronzes

Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Last Answer : (A) Welding

Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Description : Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Last Answer : (A) Its casting unsound

Among casting, forging and forging which has the slowest rate of production? a) Casting b) Forging c) Machining d) All have equal rate of production

Description : Among casting, forging and forging which has the slowest rate of production? a) Casting b) Forging c) Machining d) All have equal rate of production

Last Answer : c) Machining

Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Description : Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Last Answer : b) Forging

What is NOT true about the tenure of the Speaker of the Lok Sabha? (a) He is no longer a Speaker if he ceases to be a member of the Lok Sabha due to any reason (b) When the Lok Sabha dissolves, the Speaker vacates his position simultaneously (c) The Speaker is the head of the Lok Sabha and also its representative (d) When there's a deadlock in vote, the Speaker can cast his casting vote to break the deadlock

Description : What is NOT true about the tenure of the Speaker of the Lok Sabha? (a) He is no longer a Speaker if he ceases to be a member of the Lok Sabha due to any reason (b) When the Lok Sabha ... representative (d) When there's a deadlock in vote, the Speaker can cast his casting vote to break the deadlock

Last Answer : (b) When the Lok Sabha dissolves, the Speaker vacates his position simultaneously

The head quarter of BBC- British Broad Casting Corporation is situated in:a) New York b) Washington c) England d) None of these

Description : The head quarter of BBC- British Broad Casting Corporation is situated in:a) New York b) Washington c) England d) None of these

Last Answer : c) England

This statement does not apply to the ‘Company Vision Statement’. A. Audacious B. Time Bound C. Future Casting D. All of these options apply

Description : This statement does not apply to the ‘Company Vision Statement’. A. Audacious B. Time Bound C. Future Casting D. All of these options apply

Last Answer : All of these options apply