Why are Cs and K used as electrodes in photoelectric cells?

Why are Cs and K used as electrodes in photoelectric cells? 
by

1 Answer

Answer :

The alkali metal atoms have the largest sizes in a particular period of the periodic table. With This property makes caesium and potassium useful as electrodes in photoelectric cells.
by

Related questions

Why is that on being heated in excess supply of air K,Rb and Cs forms superoxide’s instead of Oxides & peroxides?

Description : Why is that on being heated in excess supply of air K,Rb and Cs forms superoxide’s instead of Oxides & peroxides?

Last Answer : Ans.K + ,Rb+ and Cs+ are large cations and superoxide ion is larger than oxide and peroxide ions. Since due to higher lattice energies,a large cation stabilizes a large anion,therefore these metals form Superoxides.

The increasing order of reactivity among group 1 elements is Li<Na<K<Rb<Cs whereas among the group 17 elements, it is F>Cl>Br>I. Explain.

Description : The increasing order of reactivity among group 1 elements is Li

Last Answer : Ans. In group 1 elements (alkali metals) the reactivity of the metals is mainly due to the electron releasing tendency of their atoms, which is related to ionization enthalpy, Since ... electron gain enthalpy. Since both of them decrease down the group, the reactivity therefore decreases.

Among Li, Na, K, Rb, Cs, the element with lowest ionization energy is________

Description : Among Li, Na, K, Rb, Cs, the element with lowest ionization energy is________

Last Answer : Ans. Cs has lowest ionization enthalpy.

Why are potassium and caesium, rather than lithium used in photoelectric cells ?

Description : Why are potassium and caesium, rather than lithium used in photoelectric cells ?

Last Answer : Ans. Potassium and caesium have much lower ionization enthalpy than that of lithium. As a result, these metals on exposure to light, easily emit electrons but lithium does not. Therefore, K and Cs rather than Li are used in photoelectric cells

The most electropositive element among the following is (a) Na (b) Ca (c) K (d) Cs

Description : The most electropositive element among the following is (a) Na (b) Ca (c) K (d) Cs

Last Answer : Ans:(d)

Solar cells work on the principle of – (1) photovoltaic effect (2) photoelectric effect (3) photoconductive effect (4) photosynthesis

Description : Solar cells work on the principle of – (1) photovoltaic effect (2) photoelectric effect (3) photoconductive effect (4) photosynthesis

Last Answer : (1) photovoltaic effect Explanation: Solar cells work on the principle of photovoltaic effect.

ROM is composed of 1) Magnetic cores 2) Micro-processors 3) Photoelectric cells 4) Floppy disks

Description : ROM is composed of 1) Magnetic cores 2) Micro-processors 3) Photoelectric cells 4) Floppy disks

Last Answer : 2) Micro-processors

Solar cells work on the principle of (1) photovoltaic effect (2) photoelectric effect (3) photoconductive effect (4) photosynthesis

Description : Solar cells work on the principle of (1) photovoltaic effect (2) photoelectric effect (3) photoconductive effect (4) photosynthesis

Last Answer : photovoltaic effect

Which one of the following statements concerning glucose-6-phosphate dehydrogenase deficiency is correct? (A) Young R.B.Cs, particularly reticulocytes, contain the highest enzyme activity cells show less enzyme activity (B) Glucose-6-P Dehydroglucose deficiency leads to disfuction of many tissues (C) G-6-p Dehydroglucose deficiency is due to a single deletion of a large sequence of DNA in the G-6-PD gene (D) G-6-PD deficiency is precipitated by ingestion of drugs such as aspirin

Description : Which one of the following statements concerning glucose-6-phosphate dehydrogenase deficiency is correct? (A) Young R.B.Cs, particularly reticulocytes, contain the highest enzyme activity cells show less enzyme ... PD gene (D) G-6-PD deficiency is precipitated by ingestion of drugs such as aspirin

Last Answer : Answer : A

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : (2) Nickel and cadmium Explanation: A rechargeable battery, storage battery, or accumulator is a type of electrical battery. It comprises one or more electrochemical cells, and is a ... sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : Copper at cathode and oxygen at anode.

Which of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc. ? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Which of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc. ? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : Nickel and cadmium

Why can caesium be used in photoelectric cell while lithium cannot ?

Description : Why can caesium be used in photoelectric cell while lithium cannot ?

Last Answer : Ans. Caesium has the lowest while lithium has the highest ionization enthalpy. Hence Cs can lose electrons very easily while lithium cannot.

Which of the following scientists explained the photoelectric effect? Was it: w) Einstein x) Planck y) Bohr z) Chadwick

Description : Which of the following scientists explained the photoelectric effect? Was it: w) Einstein x) Planck y) Bohr z) Chadwick

Last Answer : ANSWER: W -- EINSTEIN

The most electropositive elements among the following is : (1) Cs (2) Ca (3) Na (4) Br

Description : The most electropositive elements among the following is : (1) Cs (2) Ca (3) Na (4) Br

Last Answer : (1) Cs Explanation: The alkali metals are the most electropositive. Cesium is the most electropositive of the stable elements.Francium, while unstable, is theoretically the most electropositive element.

From the elements: Cl, Br, F, O, Al, C, Li, Cs and Xe; choose the following: (a) The element with highest negative electron gain enthalpy. (b) The element with lowest ionization enthalpy. (c) The element with smallest ionic radius. (d) The element with six electrons in the valence shell. (e) The element which is a liquid at room temperature. (f)The element which belongs to zero group. (g) The elements which forms largest number of compounds.

Description : From the elements: Cl, Br, F, O, Al, C, Li, Cs and Xe; choose the following: (a) The element with highest negative electron gain enthalpy. (b) The element with lowest ionization enthalpy. ( ... . (f)The element which belongs to zero group. (g) The elements which forms largest number of compounds.

Last Answer : Ans. (a). The element chlorine (Cl) has the highest negative electron gain enthalpy. (b). The element cesium (Cs) has lowest ionization enthalpy. (c). The element fluorine F has lowest atomic radius. (d ... zero group (or group 18). (g). The element carbon (C) forms the largest number of compounds.

72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of organic matter is sewage water (3) Working out the efficiency of oil driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Description : 72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of ... driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Last Answer : Estimating the amount of organic matter is sewage water

When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Description : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Last Answer : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes ... "),("Pure Zinc","ImPure Zinc"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq.)rarr(1)/(2)Cl_(2) ... )H_(2)(g),E_("cell")^(o.)=0.00V`

When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq)to(1)/(2)Cl_(2 ... 2)H_(2)(g), E_(Cell)^(otimes)=0.00V`

In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Description : In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Last Answer : Need answer

What are the half-reactions for galvanic cell with Ni and Mg electrodes?

Description : What are the half-reactions for galvanic cell with Ni and Mg electrodes?

Last Answer : Ni2+(aq) + 2e- Ni(s) and Mg(s) Mg2+(aq) + 2e-

What is oxidized in galvanic cell made with silver and nickel electrodes?

Description : What is oxidized in galvanic cell made with silver and nickel electrodes?

Last Answer : The nickel metal(apex)

How to detect damp electrodes?

Description : How to detect damp electrodes?

Last Answer : Pre dry unusually damp electrodes for 30 - 45 minutes before final drying to minimize cracking of the coating that format.

What is the voltage of an electrolytic cell copper and magnesium electrodes?

Description : What is the voltage of an electrolytic cell copper and magnesium electrodes?

Last Answer : -2.71 V

The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Description : The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Last Answer : Answer : D

Substance used for making electrodes is?

Description : Substance used for making electrodes is?

Last Answer : Graphite

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

What maintenance of earth electrodes should be done?

Description : What maintenance of earth electrodes should be done?

Last Answer : The neighbouring soil to the earth electrode shall be kept moist where necessary, by periodically pouring water through a pipe where fitted along with it or by pouring water in the immediate ... wherever available, shall be carried out to ensure their rigidity and other signs of deterioration. 

What is gap between the electrodes in transformer oil testing kit?

Description : What is gap between the electrodes in transformer oil testing kit?

Last Answer : 0.1 Inch.

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Last Answer : (D) Increasing the concentration of copper sulphate solution

In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Description : In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Last Answer : (A) Clamping methods

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Last Answer : Option B

Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Description : Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Last Answer : (a) current carrying contacts called electrodes

Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Description : Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Last Answer : Transit time

Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Description : Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Last Answer : In TANDEM SAW process there are more than one electrode is used. But for first electrode alternative current and for second electrode direct current shall be used.

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Description : Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Last Answer : c) To prevent the possible risk of cracking