What is the length of the hyperbolas transverse axis equal to?

What is the length of the hyperbolas transverse axis equal to?
by

1 Answer

Answer :

The same as the major axis.
by
selected by

Related questions

A mode where the entire magnetic field is in the transverse plane and has no portion parallel to the length axis.

Description : A mode where the entire magnetic field is in the transverse plane and has no portion parallel to the length axis.

Last Answer : TM mode

When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D None of these

Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D None of these

Last Answer : C Torsional vibrations

The vibrations perpendicular to the shaft axis are known as A Transverse B Longitudinal C Torsional D None of the mentioned

Description : The vibrations perpendicular to the shaft axis are known as A Transverse B Longitudinal C Torsional D None of the mentioned

Last Answer : A Transverse

When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A. longitudinal vibrations B. transverse vibrations C. torsional vibrations D. none of these

Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A. longitudinal vibrations B. transverse vibrations C. torsional vibrations D. none of these

Last Answer : C. torsional vibrations

If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above

Description : If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above

Last Answer : C) Torsional vibration

The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Description : The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Last Answer : (D) Algebraic sum of the transverse forces of the section

A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Description : A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Last Answer : b) Transverse loads and couples

Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Last Answer : b) 1.21P/hl

A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Last Answer : a) PSinθ(Sinθ+Cosθ)/hl

Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed

Last Answer : b) 1.21P/hl

A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed

Last Answer : a) PSinθ(Sinθ+Cosθ)/hl

For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Last Answer : B. Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Last Answer : (B) Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Last Answer : b) Longitudinal

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Description : By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of ... ) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Last Answer : (A) (i) and (ii) are correct

In transverse fillet welded joint, the size of weld is equal to (a) 0.5 × Throat of weld (b) Throat of weld (c) 2 × Throat of weld (d) 2 × Throat of weld

Description : In transverse fillet welded joint, the size of weld is equal to (a) 0.5 × Throat of weld (b) Throat of weld (c) 2 × Throat of weld (d) 2 × Throat of weld

Last Answer : (c) 2 × Throat of weld

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Last Answer : A Transverse vibrations

Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is equal to natural frequency of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Description : Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is ... of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Last Answer : A) Is equal to natural frequency of the system in transverse vibration

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Description : When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Last Answer : (C) Tensile stress

The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 7 mm

Description : The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 7 mm

Last Answer : Answer: Option D

A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Description : A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Last Answer : (b) Points of equal elevation

In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Description : In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Last Answer : b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate

For bending equation to be valid, radius of curvature of the beam after bending should be a. Equal to its transverse dimensions b. Infinity c. Very large compared to its transverse dimensions d. Double its transverse dimensions

Description : For bending equation to be valid, radius of curvature of the beam after bending should be a. Equal to its transverse dimensions b. Infinity c. Very large compared to its transverse dimensions d. Double its transverse dimensions

Last Answer : c. Very large compared to its transverse dimensions

2. An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. [All India] -Chemistry-10

Description : 2. An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. [All India] -Chemistry-10

Last Answer : this is the answer for the respected question

Write the coordinates of the vertices of a rectangle whose length and breadth are 6 and 3 units respectively, one vertex at the origin, the longer side lies on the y-axis and one of the vertices lies in the second quadrant. -Maths 9th

Description : Write the coordinates of the vertices of a rectangle whose length and breadth are 6 and 3 units respectively, one vertex at the origin, the longer side lies on the y-axis and one of the vertices lies in the second quadrant. -Maths 9th

Last Answer : Solution :-

An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. -Physics

Description : An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. -Physics

Last Answer : The focal length' of convex length is 7.14 cm. Solution: The given quantities are Height of the object h = 50 cm Height of the image formed h' = -20 cm Image distance v = 10 cm The image ... object distance will be So the focal length will be Thus the focal length of the convex lens is 7.14 cm

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Last Answer : answer:

A needle 10 cm long is placed along the axis of a convex lens of focal length 10 cm such that the middle point of the neddle is at a distance of 10 cm

Description : A needle 10 cm long is placed along the axis of a convex lens of focal length 10 cm such that the middle point of the neddle is at a distance of 10 cm

Last Answer : A needle 10 cm long is placed along the axis of a convex lens of focal length 10 cm such that ... lens. Find the length of the image of the neddle.

A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius at a distance of 5 cm from the mirror. An object is placed s

Description : A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius at a distance of 5 cm from the mirror. An object is placed s

Last Answer : A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius ... the object itself. Determine the position of the object.

The magnetic field at a point on the axis of a long solenoid having 5 turns per cm length when a current of 0.8 A flows through it is

Description : The magnetic field at a point on the axis of a long solenoid having 5 turns per cm length when a current of 0.8 A flows through it is

Last Answer : The magnetic field at a point on the axis of a long solenoid having 5 turns per cm length when a current of 0.8 A ... )` D. `8.024xx10^(-8) Wb//m^(2)`

If a length of a line segment is 6 and another line segment is 8 how long is the major axis of the ellipse?

Description : If a length of a line segment is 6 and another line segment is 8 how long is the major axis of the ellipse?

Last Answer : The answer will depend on what, if anything, the line segmentshave to do with the ellipse.

What is the equation for an ellipse with a center at the origin and one focus st(1,1)and the length of the semimajor axis is 4.?

Description : What is the equation for an ellipse with a center at the origin and one focus st(1,1)and the length of the semimajor axis is 4.?

Last Answer : Use the standard form (x−h)2a2+(y−k)2b2=1 ( x − h ) 2 a 2 + ( y − k ) 2 b 2 = 1 . If the x-coordinates of the given vertices and foci are the same, then the major axis is parallel to the y-axis. Use the standard form (x−h)2b2+(y−k)2a2=1 ( x − h ) 2 b 2 + ( y − k ) 2 a 2 = 1 .

An object is placed on the principal axis of a convex lens of focal length 10 cm. If the distance of the object from the lens is 30 cm, what is the distance of the image formed? (1) 20 cm (2) 15 cm (3) 30 cm (4) 10 cm

Description : An object is placed on the principal axis of a convex lens of focal length 10 cm. If the distance of the object from the lens is 30 cm, what is the distance of the image formed? (1) 20 cm (2) 15 cm (3) 30 cm (4) 10 cm

Last Answer : (2) 15 cm

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Description : The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Last Answer : (D) Useful for computing laminar flow problems

If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant (A) 0.1 (B) 0.4 (C) 0.6 (D) 1.33

Description : If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant (A) 0.1 (B) 0.4 (C) 0.6 (D) 1.33

Last Answer : (B) 0.4

If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Description : If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Last Answer : (A) f/i

The distance between Pole and Focus is called a) principal axis b)focal length c)radius of curvature d)centre of curvature

Description : The distance between Pole and Focus is called a) principal axis b)focal length c)radius of curvature d)centre of curvature

Last Answer : b)focal length

can mechanical waves be both transverse and longitudinal?

Description : can mechanical waves be both transverse and longitudinal?

Last Answer : mechanical waves can be both transverse and longitudinal, but all electromagnetic waves are transverse.

What are the sources of transverse vibration of a drawn wire ?

Description : What are the sources of transverse vibration of a drawn wire ?

Last Answer : 1. Length formula: If the tension of a vibrating wire and the mass of a single length remain unchanged , the frequency of the wire is disproportionate to the length. 2. Tension formula: If the ... , the frequency of the wire is disproportionate to the square root of the mass of a single length.

What is the other name of transverse wave ?

Description : What is the other name of transverse wave ?

Last Answer : Invertebrate wave is also called transverse wave.

What is a transverse wave ?

Description : What is a transverse wave ?

Last Answer : A wave that travels perpendicular to the direction of vibration is called transverse wave.

What is transverse wave ?

Last Answer : A wave that travels perpendicular to the direction of vibration is called transverse wave.

Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and `y_(2) = 3.0 cm sin [(4x-700t - pi//3) rad]`.

Description : Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and `y_(2) = 3.0 cm sin [(4x-700t - pi//3) rad]`.

Last Answer : Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and ... wave D. The particle will be oscillating in xy-plane.

Four particles `alpha`-particle, deuteron and electron and a `CI^(-)` ion enter in a transverse magnetic field perpendicular to it with same kinetic e

Description : Four particles `alpha`-particle, deuteron and electron and a `CI^(-)` ion enter in a transverse magnetic field perpendicular to it with same kinetic e

Last Answer : Four particles `alpha`-particle, deuteron and electron and a `CI^(-)` ion enter in a ... shown in figure. Now match the following two columns.

An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it will be

Description : An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it will be

Last Answer : An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it ... /Br` B. `B/rv` C. Brv D. `vr/B`