Find the equivalent resistance across `AB` :

Find the equivalent resistance across `AB` :
by

1 Answer

Answer :

Find the equivalent resistance across `AB` : A. 1`Omega` B. 2`Omega` C. 3`Omega` D. 4`Omega`
by
selected by

Related questions

The Octal equivalent of HEX and number AB.CD is

Description : The Octal equivalent of HEX and number AB.CD is  (A) 253.314 (B) 253.632 (C) 526.314 (D) 526.632

Last Answer : The Octal equivalent of HEX and number AB.CD is 253.632

In the early 1900’s in England, there was two towns: town A and town B, and there was a huge river in between them. The only way across to each town was by a long bridge with a guard post in the middle. It took 20 minutes to cross the bridge from one side to the other and 10 minutes each way from the guards tower. There were no hiding spots on the bridge so people couldn’t sneak past, and the guard comes out every 5 minutes or so to check to see if anyone is trying to cross. The guards tower was placed because of a law that stated that no one was aloud to leave their own town into the other because of political reasons and anyone who was caught by the guard would be fined and told to turn back. Many people have tried to cross but have always been caught, even very fast runners have only ab

Description : In the early 1900's in England, there was two towns: town A and town B, and there was a huge river in between them. The only way across to each town was by a long bridge with a guard ... back. Many people have tried to cross but have always been caught, even very fast runners have only ab -Riddles

Last Answer : Did you get it? The answer is that they went up close to the guards tower, turned around and started walking back to the town they came from, the guard caught them and assumed that they came ... way and sent them back! Hope you enjoyed this, please subscribe and check back soon for more riddles!

Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is equivalent to a rigid boundary(C) Streamlines intersect at isolated point of zero velocity and infinitevelocity(D) The fluid lying between any two streamlines can be considered to be inisolation and the streamline spacing varies inversely as the velocity

Description : Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is ... any two streamlines can be considered to be in isolation and the streamline spacing varies inversely as the velocity

Last Answer : (A) It is always parallel to the main direction of the fluid flow

If `V_(A)-V_(B)=V_(0)` and the value of each resistance is R, then I. net resistance between AB is `(R)/(2)` II. Net resistance between AB is `(3R)/(5

Description : If `V_(A)-V_(B)=V_(0)` and the value of each resistance is R, then I. net resistance between AB is `(R)/(2)` II. Net resistance between AB is `(3R)/(5

Last Answer : If `V_(A)-V_(B)=V_(0)` and the value of each resistance is R, then I. net resistance between AB is `(R ... II B. I and III C. Only I D. All of these

In given figure, the potentiometer wire AB has a resistance of `5 Omega` and length 10 m . The balancing length AM for the emf of 0.4 V is

Description : In given figure, the potentiometer wire AB has a resistance of `5 Omega` and length 10 m . The balancing length AM for the emf of 0.4 V is

Last Answer : In given figure, the potentiometer wire AB has a resistance of `5 Omega` and length 10 m . The balancing length AM for ... B. 4 m C. `0.8` m D. 8 m

AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Description : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Last Answer : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a ... `1.6V` C. `0.08V` D. `0.16V`

`AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm` and `CB = 80 cm`. The resistance `R` is eq

Description : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm` and `CB = 80 cm`. The resistance `R` is eq

Last Answer : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm ... ` B. `8Omega` C. `20Omega` D. `40Omega`

Find the equivalent resistance of the network showed in figure between the terminal A and B? -Technology

Description : Find the equivalent resistance of the network showed in figure between the terminal A and B? -Technology

Last Answer : This answer was deleted by our moderators...

Compute the equivalent resistance of the network shown in A and B? -Technology

Description : Compute the equivalent resistance of the network shown in A and B? -Technology

Last Answer : 1 is correct

Find the equivalent resistance of the networks shown in Fig. 4.51 between the points A and B.

Description : Find the equivalent resistance of the networks shown in Fig. 4.51 between the points A and B.

Last Answer : Find the equivalent resistance of the networks shown in Fig. 4.51 between the points A and B.

Calculate the equivalent resistance between points A and B in each of the following networks of resistors :

Description : Calculate the equivalent resistance between points A and B in each of the following networks of resistors :

Last Answer : Calculate the equivalent resistance between points A and B in each of the following networks of resistors :

Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Description : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Last Answer : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.

The equivalent resistance resistance between A and B of network shown in figure is

Description : The equivalent resistance resistance between A and B of network shown in figure is

Last Answer : The equivalent resistance resistance between A and B of network shown in figure is A. `(3R)/(4)` B. `(4R)/(3)` C. 6 R D. 2 R

For the circuit shown in figure given below, the equivalent resistance points A and B is

Description : For the circuit shown in figure given below, the equivalent resistance points A and B is

Last Answer : For the circuit shown in figure given below, the equivalent resistance points A and B is A. `10Omega` B. `5 Omega` C. `(10)/(3)Omega` D. `2Omega`

The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Description : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Last Answer : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4 ... , 2 Omega` D. `6 Omega, 2 Omega`

In a uniform ring of resistance `R` there are two points `A` and `B` such that `/_ ACB = theta`, where `C` is the centre of the ring. The equivalent r

Description : In a uniform ring of resistance `R` there are two points `A` and `B` such that `/_ ACB = theta`, where `C` is the centre of the ring. The equivalent r

Last Answer : In a uniform ring of resistance `R` there are two points `A` and `B` such that `/_ ACB = theta`, where `C` ... ))` D. `(R )/(4pi^(2))(2pi-theta)theta`

Consider the combination of resistor, The equivalent resistance between a and b is

Description : Consider the combination of resistor, The equivalent resistance between a and b is

Last Answer : Consider the combination of resistor, The equivalent resistance between a and b is A. `(R )/(6)` B. `(2R)/(3)` C. `(R )/(3)` D. `3R`

Equivalent resistance between points A and B is `0.5 xR.` Find value of x.

Description : Equivalent resistance between points A and B is `0.5 xR.` Find value of x.

Last Answer : Equivalent resistance between points A and B is `0.5 xR.` Find value of x. A. 3R B. 4R C. `(5R)/(2)` D. `(7R)/(2)`

In the arrangement shown, the magnitude of each resistance is `1Omega`. The equivalent resistance between O and A is given by

Description : In the arrangement shown, the magnitude of each resistance is `1Omega`. The equivalent resistance between O and A is given by

Last Answer : In the arrangement shown, the magnitude of each resistance is `1Omega`. The equivalent resistance between O and A is ... )/(3)Omega` D. `(5)/(6)Omega`

The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected as shown, is

Description : The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected as shown, is

Last Answer : The equivalent resistance between point A and B of an infinite network of resistance, each of `1Omega`, connected ... C. `(1+sqrt5)/(2)Omega` D. zero

Equivalent resistance between A and B will be

Description : Equivalent resistance between A and B will be

Last Answer : Equivalent resistance between A and B will be A. 2`Omega` B. 18`Omega` C. 6`Omega` D. `3.6Omega`

The equivalent resistance between P and Q in the figure is approximately

Description : The equivalent resistance between P and Q in the figure is approximately

Last Answer : The equivalent resistance between P and Q in the figure is approximately A. 6`Omega` B. 5.333`Omega` C. `7.5Omega` D. 20`Omega`

If each of the resistance in the network in figure `R`, the equivalent resistance between terminals `A` and `B` is

Description : If each of the resistance in the network in figure `R`, the equivalent resistance between terminals `A` and `B` is

Last Answer : If each of the resistance in the network in figure `R`, the equivalent resistance between terminals `A` and `B` is A. R B. 5R C. 3R D. 6R

In the network of resistors shown in the adjoining figure, the equivalent resistance between A and B is

Description : In the network of resistors shown in the adjoining figure, the equivalent resistance between A and B is

Last Answer : In the network of resistors shown in the adjoining figure, the equivalent resistance between A and B is A. 54 ... `Omega` C. 36 `Omega` D. 9 `Omega`

Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Description : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Last Answer : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and ... in ohm is A. 4 B. 6 C. 8 D. 12

Equivalent resistance between the points `A` and `B` (in `Omega`) .

Description : Equivalent resistance between the points `A` and `B` (in `Omega`) .

Last Answer : Equivalent resistance between the points `A` and `B` (in `Omega`) . A. `(1)/(5)` B. `(5)/(4)` C. `(7)/(3)` D. `(7)/(2)`

In the network shown, the equivalent resistance between A and B is

Description : In the network shown, the equivalent resistance between A and B is

Last Answer : In the network shown, the equivalent resistance between A and B is A. `(4)/(3)Omega` B. `(3)/(4)Omega` C. `(24)/(17)Omega` D. `(17)/(24)Omega`

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Last Answer : (4) R/n² Explanation: Since R is directly proportional to length of the wire, when wire is cut into equal parts, then Resistance of each part = R/n

A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Description : A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Last Answer : B. 174K

Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1.0MHz and the temperature is 20˚C, and that the receiver is connected to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Description : Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1. ... to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Last Answer : A. 30.3

One of the following is not a useful quantity for comparing the noise performance receivers. A. Input noise voltage B. Equivalent noise resistance C. Noise temperature D. Noise figure.

Description : One of the following is not a useful quantity for comparing the noise performance receivers. A. Input noise voltage B. Equivalent noise resistance C. Noise temperature D. Noise figure.

Last Answer : A. Input noise voltage

The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, respectively. Calculate the equivalent input-noise resistance of this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

Give equivalent resistance, reactance and impedance referred to secondary circuit.

Description : Give equivalent resistance, reactance and impedance referred to secondary circuit.

Last Answer : Req = R2 +R1' = R2+ R1'/a² Xeq = X2 +X1' = X2+ X1'/a² Zeq = Z2 + Z1' = Z2+ Z1'/a² where a=T1/T2

Give equivalent resistance, reactance and impedance referred to primary circuit.

Description : Give equivalent resistance, reactance and impedance referred to primary circuit.

Last Answer : Req = R1 +R2' = R1+a² R2' Xeq = X1 +X2' = X1+a² X2' Zeq = Z1 +Z2' = Z1+a² Z2' where a=T1/T2

What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Description : What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as ... antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Last Answer : B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna

ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Description : ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Last Answer : C. 174 K

Two 10 Ω resistors are connected in parallel, their equivalent resistance is A. 5 ΩB. 0.2 ΩC. 15 ΩD. 20 Ω

Description : Two 10 Ω resistors are connected in parallel, their equivalent resistance isA. 5 Ω B. 0.2 Ω C. 15 Ω D. 20 Ω

Last Answer :  5 Ω

Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Description : Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Last Answer : Answer: Option D

What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Description : What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Last Answer : 4Ω

Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?

Description : Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?

Last Answer : 7.5kΩ

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Description : When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Last Answer : C. 12/11ohm

When the diode is forward biased, it is equivalent to a. An off switch b. An On switch c. A high resistance d. None of the above

Description : When the diode is forward biased, it is equivalent to a. An off switch b. An On switch c. A high resistance d. None of the above

Last Answer : b. An On switch

50 The equivalent resistance of the primary of the transformer having K = 5, R1 = 0.1 ohm when referred to secondary becomes .....ohm A. 0.5 B. 0.02 C. 0.004 D. 2.5

Description : 50 The equivalent resistance of the primary of the transformer having K = 5, R1 = 0.1 ohm when referred to secondary becomes .....ohm A. 0.5 B. 0.02 C. 0.004 D. 2.5

Last Answer : A. 0.5

N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination?

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Last Answer : R/n2

Find the Norton equivalent resistance for the network shown in Fig No. 2

Description : Find the Norton equivalent resistance for the network shown in Fig No. 2

Last Answer : Solution: To find Norton’s equivalent resistance removing voltage source and current source. Voltage source is replaced by short circuit and current source is replaced by open circuit so, we get circuit as