Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel
Last Answer : (A) Aluminium triethyl activated with TiCl4
Description : The monomer unit of polyethene is:
Last Answer : The monomer unit of polyethene is: A. `CF_(2) = CF_(2)` B. `CH_(2) = CH_(2)` C. `CH_(2) = CHCl` D. `CH_(2)=CHCN`
Description : Arrange in increasing order of inter molecular forces. Nylon 66, Buna-S and polyethene.
Last Answer : Ans: Nylon 66 > polyethene> Buna-S
Description : Stereospecific agents are exemplified by (A) Radiation (B) Supported metal oxide catalysts (C) Ziegler catalysts (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : The catalyst used in the manufacture of sulphuric acid by contact process is `:
Last Answer : The catalyst used in the manufacture of sulphuric acid by contact process is `: A. `Al_(2)O_(3)` B. `Cr_(2)O_(3)` C. `V_(2)O_(5)` D. `Mn_(3)O_(4)`
Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate
Last Answer : (C) Polypropylene
Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride
Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride
Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation
Last Answer : (B) Achieves an yield of 95-98% based on ethylene
Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina
Last Answer : (B) Iron
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c
Last Answer : (D) All a, b & c
Description : A catalyst inhibitor (A) Lessens its selectivity (B) May be useful for suppressing undesirable side reactions (C) Is added in small quantity during the catalyst manufacture itself (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride
Last Answer : (C) 20% oleum
Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier
Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier
Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture
Last Answer : (D) Ostwald's process of HNO3 manufacture
Description : The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these
Last Answer : (B) Oleum
Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3
Last Answer : (A) AgO
Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper
Last Answer : (B) Nickel
Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)
Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3
Last Answer : (C) V2O5
Description : Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate
Last Answer : (A) Water treatment
Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)
Last Answer : (D) All (A), (B), & (C)
Description : Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these
Last Answer : (A) Langmuir
Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He
Last Answer : (A) N2
Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)
Last Answer : (C) Surface area
Description : What is the break even quantityif the cost of manufacture is the same whichever method is used if A is a fixed cost of 40000 and a variable of 23 and b has a fixed cost of 52000?
Last Answer : There question is incomplete:There is no variable cost given for manufacturing method B. I'll assume it is b.It is unclear as to quantity for which the cost of manufacturing by both methods is the same. I'll assume it is ... - b)I'll let you fill in the value of b; if b has no variable cost, b = 0.
Description : Theories of elastic failure help in the (a) Material development (b) Development of method of manufacture (c) Both (a) & (b) (d) None
Last Answer : (c) Both (a) & (b)
Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these
Last Answer : (D) None of these
Description : Deacon's method is used for the manufacture of (A) Glauber's salt (B) Common salt (C) Chlorine (D) Graphite electrode
Last Answer : (C) Chlorine