Catalyst used in the production of high density polythene by low pressure Ziegler process is(A) Aluminium triethyl activated with TiCl4(B) Platinum(C) Molybdenum(D) Nickel

Catalyst used in the production of high density polythene by low
pressure Ziegler process is
(A) Aluminium triethyl activated with TiCl4
(B) Platinum
(C) Molybdenum
(D) Nickel
by

1 Answer

Answer :

(A) Aluminium triethyl activated with TiCl4
by

Related questions

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Zeigler process (A) Produces high density polythene(B) Uses no catalyst(C) Produces low density polythene(D) Employs very high pressure

Description : Zeigler process (A) Produces high density polythene (B) Uses no catalyst (C) Produces low density polythene (D) Employs very high pressure

Last Answer : (A) Produces high density polythene

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Description : Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Last Answer : (B) Platinum-rhodium

For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Description : Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Last Answer : (B) Nickel and chromium

Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Description : Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Last Answer : (B) Nickel and copper

Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Last Answer : (A) Nickel

For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen

Description : For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen

Last Answer : (C) (i) nickel (ii) sulphur

Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Last Answer : (B) Nickel

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

The catalyst used in the manufacture of polyethene of Ziegler method is:

Description : The catalyst used in the manufacture of polyethene of Ziegler method is:

Last Answer : The catalyst used in the manufacture of polyethene of Ziegler method is: A. lithium ... aluminium C. titanium oxide D. titanium isoperoxide

Entire cell is enclosed by a steel casing that is protected usually by _____ and _____. • Nickel, chromium • Chromium, molybdenum • Aluminium, molybdenum • Nickel, aluminium

Description : Entire cell is enclosed by a steel casing that is protected usually by _____ and _____. • Nickel, chromium • Chromium, molybdenum • Aluminium, molybdenum • Nickel, aluminium

Last Answer : • Chromium, molybdenum

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Description : Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Last Answer : (A) Aluminium chloride

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Description : Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Last Answer : (A) Produces high density polyethylene

. Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poiso(D) All (A), (B) and (C)ning tendency

Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

__________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Description : __________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Last Answer : (A) High density

Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Description : Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Last Answer : (D) More flexible

Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Description : Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Last Answer : (B) Hastelloy C

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Nickel and molybdenum are the basic constituents of (A) Hastelloy (B) German silver (C) Inconel (D) Solder

Description : Nickel and molybdenum are the basic constituents of (A) Hastelloy (B) German silver (C) Inconel (D) Solder

Last Answer : (A) Hastelloy

Hastelloy comprises of (A) Copper and tin (B) Copper and nickel (C) Molybdenum and nickel (D) Lead and tin

Description : Hastelloy comprises of (A) Copper and tin (B) Copper and nickel (C) Molybdenum and nickel (D) Lead and tin

Last Answer : (C) Molybdenum and nickel

18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Last Answer : (A) 18% chromium and 8% nickel

Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Description : Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Last Answer : (C) Copper

Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Last Answer : (A) Molybdenum

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Description : The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Last Answer : (C) Both 'a' & 'b'

Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Description : Reactor used in the production of polyvinyl chloride (PVC) is made of (A) Nickel or glass lined steel (B) Aluminium (C) Tantalum (D) Lead

Last Answer : (A) Nickel or glass lined steel

Give one example of each for low density polythene and high density polthene.

Description : Give one example of each for low density polythene and high density polthene.

Last Answer : Ans: LDP. Squeze bottle and toys  HDP. Buckets, dustbin, bottles.

Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Description : Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Last Answer : (D) 0.91

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Stereospecific agents are exemplified by (A) Radiation (B) Supported metal oxide catalysts (C) Ziegler catalysts (D) All (A), (B) & (C)

Description : Stereospecific agents are exemplified by (A) Radiation (B) Supported metal oxide catalysts (C) Ziegler catalysts (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Description : Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Last Answer : (A) Nickel

Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Last Answer : (B) Iron