Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Which catalyst is used in the manufacture of ethylene oxide by
oxidation of ethylene?
(A) AgO
(B) Al2O3
(C) ZnCl2
(D) Fe2O3
by

1 Answer

Answer :

(A) AgO
by

Related questions

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Last Answer : (A) CaO, SiO2 , Al2O3

Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Last Answer : (A) CaO & SiO2

Which of the following is the second major component of cement? (A) Al2O3(B) SiO2(C) CaO(D) Fe2O3

Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3

Last Answer : (B) SiO2

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Fat splitting catalyst is(A) CaCO3(B) ZnO(C) Al2O3(D) Fe

Description : Fat splitting catalyst is (A) CaCO3 (B) ZnO (C) Al2O3 (D) Fe

Last Answer : (B) ZnO

Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at(A) 1 atm & 100°C(B) 5 atm & 275°C(C) 100 atm & 500°C(D) 50 atm & 1000°C

Description : Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at (A) 1 atm & 100°C (B) 5 atm & 275°C (C) 100 atm & 500°C (D) 50 atm & 1000°C

Last Answer : (B) 5 atm & 275°C

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

During smelting process, the combination of fuel in the furnace (A) Forms carbon dioxide (B) Carbon dioxide with carbon forms carbon mono-oxide (C) Carbon mono-oxide reacts with Fe2O3 to form iron and liberates CO2 (D) All the above

Description : During smelting process, the combination of fuel in the furnace (A) Forms carbon dioxide (B) Carbon dioxide with carbon forms carbon mono-oxide (C) Carbon mono-oxide reacts with Fe2O3 to form iron and liberates CO2 (D) All the above

Last Answer : Answer: Option D

Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Last Answer : Fe catalyst

Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone?(a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone? (a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Last Answer : AlCl3 catalyst

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Last Answer : (B) Iron

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

A catalyst inhibitor (A) Lessens its selectivity (B) May be useful for suppressing undesirable side reactions (C) Is added in small quantity during the catalyst manufacture itself (D) All (A), (B) and (C

Description : A catalyst inhibitor (A) Lessens its selectivity (B) May be useful for suppressing undesirable side reactions (C) Is added in small quantity during the catalyst manufacture itself (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Last Answer : (C) 20% oleum

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Last Answer : (D) Ostwald's process of HNO3 manufacture

The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Description : The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Last Answer : (B) Oleum

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

. Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poiso(D) All (A), (B) and (C)ning tendency

Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Last Answer : (B) Nickel

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Description : Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Last Answer : (A) Water treatment

Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcoho(d) Ethylene oxidel

Description : Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcohol (d) Ethylene oxide

Last Answer : Ethylene oxide

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Description : Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Last Answer : (B) Vinyl chloride

Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Last Answer : (B) Ethylene oxide

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Description : Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Last Answer : (A) Nickel

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Description : An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Last Answer : (B) Ethylene oxidation

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Description : Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Last Answer : (B) Platinum-rhodium

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Description : Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Last Answer : (A) V2O5

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum