Explain errors in product of measured quantity.

Explain errors in product of measured quantity.
by

1 Answer

Answer :

Explain errors in product of measured quantity.
by
selected by

Related questions

Explain errors in sum and in difference of measured quantity.

Description : Explain errors in sum and in difference of measured quantity.

Last Answer : Explain errors in sum and in difference of measured quantity.

Explain errors due to power (index) of measured quantity.

Description : Explain errors due to power (index) of measured quantity.

Last Answer : Explain errors due to power (index) of measured quantity.

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

What is a measurement? How is measured quantity expressed?

Description : What is a measurement? How is measured quantity expressed?

Last Answer : What is a measurement? How is measured quantity expressed?

Which physical quantity is measured in ‘siemens’? (1) Electric potential (2) Electrical conductance (3) Magnetic flux (4) Refractive index

Description : Which physical quantity is measured in ‘siemens’? (1) Electric potential (2) Electrical conductance (3) Magnetic flux (4) Refractive index

Last Answer : (2) Electrical conductance Explanation: The Siemens is the unit of electric conductance, electric susceptance and electric admittance in the International System of Units (SI).

What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Description : What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Last Answer : (A) Megger (megohmmeter), infinity; (B) Wattmeter, 9.5 kilowatts (9,500 watts). (C) Watt-hour meter, 2.693 megawatt-hours 2,693 kilowatt-hours) (2,693,000 watt-hours).

What type of meter is shown and what is the value of the quantity being measured for each meter in figure1-49?

Description : What type of meter is shown and what is the value of the quantity being measured for each meter in figure1-49?

Last Answer : a. A dc ammeter, 90 mA dc b. A dc voltmeter, 200 V dc c. An ac voltmeter, 4.6 V ac d. An ohmmeter, 400 ohms

What electrical quantity is measured by a watt-hour meter?

Description : What electrical quantity is measured by a watt-hour meter?

Last Answer : Energy.

What electrical quantity is measured by a wattmeter?

Description : What electrical quantity is measured by a wattmeter?

Last Answer : Power

What electrical quantity is measured by an ohmmeter?

Description : What electrical quantity is measured by an ohmmeter?

Last Answer : Resistance.

What electrical quantity is measured by a voltmeter?

Description : What electrical quantity is measured by a voltmeter?

Last Answer : Voltage.

A moving system force in analog instruments which ensures that the deflection of the pointer for a given value of measured quantity always has the same value

Description : A moving system force in analog instruments which ensures that the deflection of the pointer for a given value of measured quantity always has the same value

Last Answer : controlling force

An instrument in which the magnitude of the measured quantity is indicated by means of pointer.

Description : An instrument in which the magnitude of the measured quantity is indicated by means of pointer.

Last Answer : analog instrument

Material price, mix, usage and revised quantity variances are measured on _______ basis, whereas material yield variance is measured on _______ basis. A. Output, Input B. Output, Output C. Input, Output D. None of the above

Description : Material price, mix, usage and revised quantity variances are measured on _______ basis, whereas material yield variance is measured on _______ basis. A. Output, Input B. Output, Output C. Input, Output D. None of the above

Last Answer : C. Input, Output

The sub-variance of material usage variance, known as Material mix variance is measured as A. Total standard cost - Total actual cost B. Standard cost of revised standard mix - Standard cost of actual mix C. (Standard unit price - Actual unit price) * Actual quantity used D. (Standard quantity - Actual quantity) * Unit standard price

Description : The sub-variance of material usage variance, known as Material mix variance is measured as A. Total standard cost - Total actual cost B. Standard cost of revised standard mix - Standard cost of ... unit price) * Actual quantity used D. (Standard quantity - Actual quantity) * Unit standard price

Last Answer : B. Standard cost of revised standard mix - Standard cost of actual mix

In a CRO, the quantity to be measured is applied across

Description : In a CRO, the quantity to be measured is applied across  (1) focusing electrodes (2) cathode (3) Y-plates (4) X-plates

Last Answer : C

Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Description : Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Last Answer : (B) may cause an entire system to fail.

what isThere is one error in coordination and one error in subordination in the outline below. Identify the errors and then briefly explain why coordination and subordination are important to keep in mind when creating an outline.?

Description : what isThere is one error in coordination and one error in subordination in the outline below. Identify the errors and then briefly explain why coordination and subordination are important to keep in mind when creating an outline.?

Last Answer : huh

Explain the difference between multimode and single mode core-cladding concentricity errors.

Description : Explain the difference between multimode and single mode core-cladding concentricity errors.

Last Answer : Multimode core-cladding concentricity error is the distance between the core and cladding centers expressed as a percentage of core diameter while the single mode core-cladding concentricity error is just the distance between the core and cladding centers

Explain errors occurred due to manipulation and sighting in plane tabling.

Description : Explain errors occurred due to manipulation and sighting in plane tabling.

Last Answer : i) The board not being horizontal- This error affects chiefly the measurement of vertical angles. ii) The table not being accurately centered. The plotted position of the occupied station not ... and correct any displacement. v) The defective sighting- The object not being correctly sighted.

What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Description : What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Last Answer : 1. Error due to stray magnetic fields-   Main magnetic field gets disturbed by external magnetic fields known as stray magnetic fields.  2. Compensation technique   To avoid this error, ... resistance alloy having a negligible resistance temp coefficient in the ratio of 1:10 for pressure coil 

List the different errors in wattmeter & explain compensation for it.

Description : List the different errors in wattmeter & explain compensation for it.

Last Answer : Errors in Wattmeter Compensation method Error due to connection method To overcome this error, wattmeters are provided with additional compensating winding which is connected in series with ... due to friction The weight of moving system be reduced to minimum possible.

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Last Answer : (B) Large quantity of very fine

Production cost which increase with the quantity of product made is called ? 1. Absorption Cost 2. High Production Cost 3. Non-fixed 4. Variable cost 5. None of these

Description : Production cost which increase with the quantity of product made is called ? 1. Absorption Cost 2. High Production Cost 3. Non-fixed cost 4. Variable cost 5. None of these

Last Answer : Variable cost

Compared to the case of perfect competition, a monopolist is more likely to: a. charge a higher price b. produce a lower quantity of the product c. make a greater amount of economic profit d. all of the above

Description : Compared to the case of perfect competition, a monopolist is more likely to: a. charge a higher price b. produce a lower quantity of the product c. make a greater amount of economic profit d. all of the above

Last Answer : d. all of the above

Price elasticity of demand provides A.A measure of the responsiveness of the quantity demanded to changes in the price of the product, holding constant the values of all other variables in the demand function. B.A technical change in the goodwill of the firm C.A technical change in the cost of product D.Technical change in the value.

Description : Price elasticity of demand provides A.A measure of the responsiveness of the quantity demanded to changes in the price of the product, holding constant the values of all other variables in the demand function ... the firm C.A technical change in the cost of product D.Technical change in the value.

Last Answer : A.A measure of the responsiveness of the quantity demanded to changes in the price of the product, holding constant the values of all other variables in the demand function.

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Which of the following need not be in the same vision of field? a) Product name. c) Place of Origin b) Date mark. d) Quantity

Description : Which of the following need not be in the same vision of field? a) Product name. c) Place of Origin b) Date mark. d) Quantity

Last Answer : Place of Origin

Which of the following need not to be in the same vision of field c) Product name c) Quantity d) Date mark d) Place above of origin

Description : Which of the following need not to be in the same vision of field c) Product name c) Quantity d) Date mark d) Place above of origin

Last Answer : place above the origin

Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or expressed (b) A location, person or an item of equipment or a group of these for which costs are ascertained and used for cost control. (c) Centres having the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Description : Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed (b) A location, person or an item ... the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Last Answer : Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed

If a product has an inelastic demand and the manufacturer raises its price, A)total revenue will increase. B)quantity demanded will increase. C)the demand schedule will shift. D)the demand will become more inelastic. E)total revenue will decrease.

Description : If a product has an inelastic demand and the manufacturer raises its price, A)total revenue will increase. B)quantity demanded will increase. C)the demand schedule will shift. D)the demand will become more inelastic. E)total revenue will decrease.

Last Answer : A)total revenue will increase.

An increase in product price will cause (a) quantity demanded to decrease (b) quantity supplied to decrease © quantity demanded to increase (d) the demand curve to shift to the left

Description : An increase in product price will cause (a) quantity demanded to decrease (b) quantity supplied to decrease © quantity demanded to increase (d) the demand curve to shift to the left

Last Answer : (a) quantity demanded to decrease

Specific tariffs are collected as (a) Fixed amount of money per unit traded (b) A percentage of the price of the product © A percentage on the quantity of imports (d) All of the above.

Description : Specific tariffs are collected as (a) Fixed amount of money per unit traded (b) A percentage of the price of the product © A percentage on the quantity of imports (d) All of the above.

Last Answer : (a) Fixed amount of money per unit traded

If both the disposal income as well as number of suppliers of a product rises, the equilibrium (a) Price remain same ; (b) Price will go up ; (c) Quantity will go up ; (d) Quantity will go down

Description : If both the disposal income as well as number of suppliers of a product rises, the equilibrium (a) Price remain same ; (b) Price will go up ; (c) Quantity will go up ; (d) Quantity will go down

Last Answer : (c) Quantity will go up ;

If there is simultaneous fall in consumers disposal income as well number of suppliers of a product in the market, the (a) Equilibrium quantity will decrease ; (b) Equilibrium price will decrease ; (c) Equilibrium price will go up ; (d) Equilibrium quantity will increase

Description : If there is simultaneous fall in consumers disposal income as well number of suppliers of a product in the market, the (a) Equilibrium quantity will decrease ; (b) Equilibrium price will decrease ; (c) Equilibrium price will go up ; (d) Equilibrium quantity will increase

Last Answer : (a) Equilibrium quantity will decrease ;

According to law of demand (a) Higher the price higher the production of the product (b) Higher the price lower the cost of production (c) Lower the price higher the demand for the product (d) Higher price higher the quantity the more the consumer demand

Description : According to law of demand (a) Higher the price higher the production of the product (b) Higher the price lower the cost of production (c) Lower the price higher the demand for the product (d) Higher price higher the quantity the more the consumer demand

Last Answer : (c) Lower the price higher the demand for the product 

The individual demand and supply curve of a product are Dx = 12-2px, Sx=3+5px, where Px stand for price and Dx and Sc respectively stands for quantity demanded and quantity supplie(d) If there are 5000 consumers and 1000 suppliers for the product under question. What will be the equilibrium price (a) `4 ; (b) `5 ; (c) `3 ; (d) `4.5

Description : The individual demand and supply curve of a product are Dx = 12-2px, Sx=3+5px, where Px stand for price and Dx and Sc respectively stands for quantity demanded and quantity supplie(d) If there are 5000 consumers and 1000 suppliers ... be the equilibrium price (a) `4 ; (b) `5 ; (c) `3 ; (d) `4.5

Last Answer : ; (c) `3 ;

The Supply function of a product x is as Sx = 5px + 3. Where Px stand for price. The quantity supplied corresponding to price of `2 will be …………… (a) 18 ; (b) 13 ; (c) 15 ; (d) 23

Description : The Supply function of a product x is as Sx = 5px + 3. Where Px stand for price. The quantity supplied corresponding to price of `2 will be …………… (a) 18 ; (b) 13 ; (c) 15 ; (d) 23

Last Answer : (b) 13 ;

The demand function of a product x is as dx = 12-2Px, where Px stand for price. The quantity demanded corresponding to price of `2 will be ……………. (a) 8 ; (b) 6 ; (c) 5 ; (d) 10

Description : The demand function of a product x is as dx = 12-2Px, where Px stand for price. The quantity demanded corresponding to price of `2 will be ……………. (a) 8 ; (b) 6 ; (c) 5 ; (d) 10 

Last Answer : (a) 8 ;

The quantity that an individual supplier is prepared to supply over a period of time is a function of (a) Price of the product ; (b) Cost of production of the product ; (c) Both ; (d) None

Description : The quantity that an individual supplier is prepared to supply over a period of time is a function of (a) Price of the product ; (b) Cost of production of the product ; (c) Both ; (d) None

Last Answer : ; (c) Both ;

According to law of supply ……….. (a) Higher the price higher the production of the product; (b) Higher the price lower the cost of production ; (c) Lower the price lower the demand for the product; (d) Higher the price higher the quantity the seller is prepared to supply in market

Description : According to law of supply ……….. (a) Higher the price higher the production of the product; (b) Higher the price lower the cost of production ; (c) Lower the price lower the demand for the product; (d) Higher the price higher the quantity the seller is prepared to supply in market

Last Answer : (d) Higher the price higher the quantity the seller is prepared to supply in market 

Which of these is not a determinant of aggregate supply (a) Quantity demanded ; (b) Price of the product under consideration ; (c) Relative price of other goods ; (d) Future expectations about prices

Description : Which of these is not a determinant of aggregate supply (a) Quantity demanded ; (b) Price of the product under consideration ; (c) Relative price of other goods ; (d) Future expectations about prices 

Last Answer : (a) Quantity demanded ;

The quantity of a commodity which an individual is willing to purchase over a specific period of time is a function of (a) Price of the product ; (b) Disposal income ; (c) Taste and price of other commodities; (d) All the three

Description : The quantity of a commodity which an individual is willing to purchase over a specific period of time is a function of (a) Price of the product ; (b) Disposal income ; (c) Taste and price of other commodities; (d) All the three

Last Answer : (d) All the three

If a firms cost of raw material increases then (a) Market price of the final product will also increase (b) Equilibrium level of quantity also increases ; (c) Marginal cost curve will shift upward (d) Marginal cost curve will shift downward

Description : If a firms cost of raw material increases then (a) Market price of the final product will also increase (b) Equilibrium level of quantity also increases ; (c) Marginal cost curve will shift upward (d) Marginal cost curve will shift downward

Last Answer : ; (c) Marginal cost curve will shift upward

............... model is designed to bring prices down by increasing the number of customers who buy a particular product at once. (A) Economic Order Quantity (B) Inventory (C) Data Mining (D) Demand-Sensitive Pricing

Description : ............... model is designed to bring prices down by increasing the number of customers who buy a particular product at once. (A) Economic Order Quantity (B) Inventory (C) Data Mining (D) Demand-Sensitive Pricing

Last Answer : (D) Demand-Sensitive Pricing

Measured quality of a manufactured product is : 1. Always constant 2. Continually decreasing 3. Subject to a certain amount of variation 4. Continually increasing

Description : Measured quality of a manufactured product is : 1. Always constant  2. Continually decreasing  3. Subject to a certain amount of variation  4. Continually increasing

Last Answer : 3. Subject to a certain amount of variation

A method, in which brand equity measured by comparing differences between the retail price of the 'brand' and the retail price of an unbranded product in the same category is called ______________ 1. brand goodwill method 2. price premium method 3. both 1 and 2 4. neither 1 nor 2 5. price increment method

Description : A method, in which brand equity measured by comparing differences between the retail price of the 'brand' and the retail price of an unbranded product in the same category is called ______________ 1. brand ... premium method 3. both 1 and 2 4. neither 1 nor 2 5. price increment method

Last Answer : price premium method

The width of a product mix is measured by the number of product A)dimensions in the product line. B)features in each brand. C)items in the product line. D)lines a company offers.

Description : The width of a product mix is measured by the number of product A)dimensions in the product line. B)features in each brand. C)items in the product line. D)lines a company offers.

Last Answer : B)features in each brand