Zero error of an instrument introduces.

Zero error of an instrument introduces.
by

1 Answer

Answer :

Zero error of an instrument introduces. (A) systematic error (B) random error (C) personal error (D) decimal error
by
selected by

Related questions

Measuring with a 30 m chain, 0.01 m too short, introduces (A) Positive compensating error (B) Negative compensating error (C) Positive cumulative error (D) Negative cumulative error

Description : Measuring with a 30 m chain, 0.01 m too short, introduces (A) Positive compensating error (B) Negative compensating error (C) Positive cumulative error (D) Negative cumulative error

Last Answer : (C) Positive cumulative error

Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Description : Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Last Answer : (D) All the above

If your friend never introduces you to her boyfriend after 3 years what would you think?

Description : If your friend never introduces you to her boyfriend after 3 years what would you think?

Last Answer : Very odd. Have you asked her to meet him?

Does anyone know a good book that introduces architecture?

Description : Does anyone know a good book that introduces architecture?

Last Answer : I’m no expert but I enjoyed and learned a bit from 101 Things I Learned in Architecture School.

I am not living in USA or Europe. Can you help me find a website or magazine that introduces the latest products from America or Europe Beauty items, grocery, toys, supplements and hobby stuff etc.....any kind of stuff is OK?

Description : I am not living in USA or Europe. Can you help me find a website or magazine that introduces the latest products from America or Europe Beauty items, grocery, toys, supplements and hobby stuff etc.....any kind of stuff is OK?

Last Answer : no longer wanted

Can you help me find a website or magazine that introduces the latest products from America or Europe?

Description : Can you help me find a website or magazine that introduces the latest products from America or Europe?

Last Answer : I am not living in USA or Europe. Can you help me find a website or magazine that introduces the latest products from America or Europe?Beauty items, grocery, toys, supplements and hobby stuff etc.....any kind of stuff is OK.

Who introduces native language instead of French in court ?

Last Answer : Lord Bentinck introduces native language instead of French in court.

Who Introduces Permanent Land Settlement ?

Last Answer : Introducing the Permanent Land Settlement - - Lord Cornwallis (in 1893).

Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Description : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Last Answer : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. ... (I) is: A. B. C. D.

Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Description : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Last Answer : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This ... (2)` D. `.^(*)C Cl_(3)`

Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Description : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. This reacrtion involves electroph

Last Answer : Reimer-Tiemann reaction introduces an aldehyde group on to the aromatic ring of phenol, ortho to the hydroxyl group. ... ` D. aq. `NaOH + C Cl_(4)`

The enzyme DNA ligase (A) Introduces superhelical twists (B) Connects the end of two DNA chains (C) Unwinds the double helix (D) Synthesises RNA primers

Description : The enzyme DNA ligase (A) Introduces superhelical twists (B) Connects the end of two DNA chains (C) Unwinds the double helix (D) Synthesises RNA primers

Last Answer : Answer : B

Which law of thermodynamics introduces the concept of entropy?

Description : Which law of thermodynamics introduces the concept of entropy?

Last Answer : Second law

A ____ is a namespace for organizing classes and interfaces in a logical manner. Placing your code into ______makes large software projects easier to manage. This section explains why this is useful and introduces you to the Application Programming Interface (API) provided by the Java Platform: a) Inheritance b) Object c) Package d) None of These

Description : A ____ is a namespace for organizing classes and interfaces in a logical manner. Placing your code into ______makes large software projects easier to manage. This section explains why this is useful and ... provided by the Java Platform: a) Inheritance b) Object c) Package d) None of These

Last Answer : c) Package

Which statement is true about a cloud computing environment? A. It cannot be used to host location based applications. B. It enables users to access systems regardless of their location. C. It introduces latency as the servers are geographically dispersed. D. It can improve a web server response time by having servers closer to the end user.

Description : Which statement is true about a cloud computing environment? A. It cannot be used to host location based applications. B. It enables users to access systems regardless of their location. C. It introduces ... D. It can improve a web server response time by having servers closer to the end user.

Last Answer : It enables users to access systems regardless of their location.

High endurance limit of carburised machine parts is because of the fact that carburisation (A) Suppresses any stress concentration produced in the parts (B) Enhances the yield point of the material (C) Introduces a compressive layer on the surface (D) Produces a better surface finish

Description : High endurance limit of carburised machine parts is because of the fact that carburisation (A) Suppresses any stress concentration produced in the parts (B) Enhances the yield point of the material (C) Introduces a compressive layer on the surface (D) Produces a better surface finish

Last Answer : (C) Introduces a compressive layer on the surface

The lower water cement ratio in concrete, introduces (A) Smaller creep and shrinkage (B) Greater density and smaller permeability (C) Improved frost resistance (D) All the above

Description : The lower water cement ratio in concrete, introduces (A) Smaller creep and shrinkage (B) Greater density and smaller permeability (C) Improved frost resistance (D) All the above

Last Answer : Answer: Option D

----------- introduces Active Passive Integration Approach for vehicle a. SAAB b. Continental c. Bosch d. MCE5

Description : ----------- introduces Active Passive Integration Approach for vehicle a. SAAB b. Continental c. Bosch d. MCE5

Last Answer : Ans:- b. Continental

An independent path is the one A. That is a complete path from source to destination node B. That is a path which introduces at least one new set of processing statements C. That is a path which introduces at most one new set of processing statements D. None of the above

Description : An independent path is the one A. That is a complete path from source to destination node B. That is a path which introduces at least one new set of processing statements C. That is a path which introduces at most one new set of processing statements D. None of the above

Last Answer : B. That is a path which introduces at least one new set of processing statements

Tommy Hilfiger introduces a new line of men's ties targeted at men who are very statu s - conscious. In keeping with this assessment, department stores selling the ties should A)charge a price based mostly on their cost. B)charge prices consistent with their existing ties. C)discount the ties to move them rapidly. D)use the price variable symbolically.

Description : Tommy Hilfiger introduces a new line of men's ties targeted at men who are very statu s - conscious. In keeping with this assessment, department stores selling the ties should A)charge a price ... their existing ties. C)discount the ties to move them rapidly. D)use the price variable symbolically.

Last Answer : D)use the price variable symbolically.

Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency

Description : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency is (a) 2.65 MHz (b) 6.25 MHz (c) 5.26 MHz (d) 6.52 MHz 

Last Answer : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 ns. The maximum clock frequency is 6.25MHz. nff  * Tdelay = 4*40 =160ns so, max. frequency = 1/ (200*10-9 ) = 6.25MHz          

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

Transformer coupling introduces which type of distortion?

Description : Transformer coupling introduces which type of distortion?

Last Answer : Transformer coupling introduces Cross over distortion.

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The good results may be obtained from a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Description : Pick up the correct statement from the following: (A) The apparent error on reversal is twice the actual error (B) The correction may be made equal to half the observed discrepancy (C) The ... a defective instrument by reversing and taking the mean of two erroneous results (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Description : CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Last Answer : a. Position and instrument error

CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Description : CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Last Answer : a. Position and instrument error

Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular of the vertical axis (c) Error due to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Description : Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular ... to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Last Answer : (e) All of the above*

The error of an instrument is normally given as a percentage of

Last Answer : The error of an instrument is normally given as a percentage of full-scale value.

The percentage limiting error, in the case of an instrument reading ...

Description :  The percentage limiting error, in the case of an instrument reading of 8.3V with a 0 to 150V voltmeter having a guaranteed accuracy of 1% full-scale reading is

Last Answer :  The percentage limiting error, in the case of an instrument reading of 8.3V with a 0 to 150V voltmeter having a guaranteed accuracy of 1% full-scale reading is 18.10%.

When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. adjusting the line voltage to calibrate the instrument C. plugging each end of one test lead into the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Description : When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. ... the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Last Answer : Answer: A

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws of the instrument around the insulated conductor C. connect the voltage test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Description : To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws ... test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Last Answer : Answer: B

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Last Answer : (A) Zero on back station

What is zero error ?

Description : What is zero error ?

Last Answer : Devices that have vernier scales or circular scales , such as slide calipers , screw-gauge. When the ends of the jaws or screws of these instruments are joined to each other, the zero spots of the vernier ... zero spots of the main scale. If they do not match , then such error is called zero error.

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control