…. is the property of a material which enables it to resist plastic deformation.

…. is the property of a material which enables it to resist plastic deformation.
by

1 Answer

Answer :

…. is the property of a material which enables it to resist plastic deformation. (A) elasticity (B) plasticity (C) hardness (D) ductility
by
selected by

Related questions

The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Description : The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Last Answer : b) Yield strength

18. The property of a liquid which enables it to resist tensile stress is called its surface tension. A) Agree B) Disagree

Description : 18. The property of a liquid which enables it to resist tensile stress is called its surface tension. A) Agree B) Disagree

Last Answer : A

The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Description : The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Last Answer : Answer: Option C

The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Description : What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Last Answer : ANSWER: Y -- YIELD STRENGTH

Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Description : Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Last Answer : (B) Toughness

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Description : Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Last Answer : (D) Plastic

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current(D) Its capacity to withstand high voltage

Description : Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current (D) Its capacity to withstand high voltage

Last Answer : (D) Its capacity to withstand high voltage

Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Description : Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Last Answer : (C) Creep

Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Description : Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Last Answer : ductile substances

Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Description : Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Last Answer : d) All of the mentioned

Which of the following help in accomplishing the locking? a) Creating supplementary friction b) Using special locking devices like split pins c) By plastic deformation d) All of the listed

Description : Which of the following help in accomplishing the locking? a) Creating supplementary friction b) Using special locking devices like split pins c) By plastic deformation d) All of the listed

Last Answer : d) All of the listed

There is sufficient plastic deformation prior to fatigue failure, which gives a warning well in advance. a) True b) False

Description : There is sufficient plastic deformation prior to fatigue failure, which gives a warning well in advance. a) True b) False

Last Answer : b) False

An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution

Description : An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution

Last Answer : (A) Sewage sludge

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as (A) Rigid (B) Tough (C) Ductile (D) Plastic

Description : The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as (A) Rigid (B) Tough (C) Ductile (D) Plastic

Last Answer : Option C

What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Description : What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Last Answer : i) Reliability – elastic modulus and yield strength. ii) Strength (for no plastic deformation under static loading) – yield point. iii) Strength (overload) – Toughness and impact resistance. iv) Wear resistance – Hardness. v) Reliability and safety – Endurance limit and yield.

The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Description : The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Last Answer : d) Soft

Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio of shear strength in natural state to the remoulded shear strength under undrained conditions is called degree of sensitivity (C) The difference between the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Description : Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio ... the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Last Answer : (D) All the above

Which property of lasers enables the medicals practitioners to use them for performing cataract operations? Explain.

Description : Which property of lasers enables the medicals practitioners to use them for performing cataract operations? Explain.

Last Answer : Laser properties like high intensity and unidirectionality are used in Cataract operation. Highly intense unidirectional LASER beam can be focused at a particular point without damaging other parts of eye.

Is it true Elastic deformation occurs when a material deforms as stress is applied?

Description : Is it true Elastic deformation occurs when a material deforms as stress is applied?

Last Answer : Yes

Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Description : Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Last Answer : (D) The ability of a material to fracture without appreciable deformation is called its ductility

Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Description : Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Last Answer : (A) Creep

A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Description : A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Last Answer : (A) Malleable

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Description : A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Last Answer : (A) Drawn into wires

. A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Description : . A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Last Answer : (B) Ductile

Which of the following facts are true for resilience? a) Ability of material to absorb energy when deformed elastically b) Ability to retain deformation under the application of load or after removal of load c) Ability of material to absorb energy when deformed plastically d) None of the mentioned

Description : Which of the following facts are true for resilience? a) Ability of material to absorb energy when deformed elastically b) Ability to retain deformation under the application of load or after removal ... c) Ability of material to absorb energy when deformed plastically d) None of the mentioned

Last Answer : a) Ability of material to absorb energy when deformed elastically

The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Description : The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Last Answer : b) Plasticity

The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Description : The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Last Answer : Option A

Endocytosis is a process whereby a cell (a) Digests itself (b) Engulfs and internalises material using its membrane (c) Identifies other cells within its immediate (d) Enables the extracellular digestion of large molecules

Description : Endocytosis is a process whereby a cell (a) Digests itself (b) Engulfs and internalises material using its membrane (c) Identifies other cells within its immediate (d) Enables the extracellular digestion of large molecules

Last Answer : Ans:(b)

The ability of a material to resist fracturing when a force is applied to it, is called………

Description : The ability of a material to resist fracturing when a force is applied to it, is called………

Last Answer : The ability of a material to resist fracturing when a force is applied to it, is called (A) ... (B) hardness (C) elasticity (D) plasticity.

A patient has a small incisal fracture of the maxillary incisor. Which is the best material to resist fracture at the acid etched tooth composite interface: A. Micro-filled composite B. Hybrid composite C. GIC D. Silicate

Description : A patient has a small incisal fracture of the maxillary incisor. Which is the best material to resist fracture at the acid etched tooth composite interface: A. Micro-filled composite B. Hybrid composite C. GIC D. Silicate

Last Answer : B. Hybrid composite

A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Description : A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Last Answer : a. Less torque.

The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Description : The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Last Answer : ANSWER: X -- THE RATIO OF STRESS OVER STRAIN

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Description : A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Last Answer : c. 4 cm

What do you mean by deformation?

Description : What do you mean by deformation?

Last Answer : What do you mean by deformation?

How does image demonstrate that deformation has taken place?

Description : How does image demonstrate that deformation has taken place?

Last Answer : Feel Free to Answer

What crustal deformation occurs at continental-continetal convergence zones?

Description : What crustal deformation occurs at continental-continetal convergence zones?

Last Answer : What is the answer ?

What was the goal of the anti deformation league?

Description : What was the goal of the anti deformation league?

Last Answer : Need answer

The cause for the Tsunami, as deduced by the seismologists, is – (1) Gravitational pull of the moon (2) Low pressure trough in the ocean (3) Deformation of sea floor and vertical displacement of water (4) Sudden change in the monsoon wind

Description : The cause for the Tsunami, as deduced by the seismologists, is – (1) Gravitational pull of the moon (2) Low pressure trough in the ocean (3) Deformation of sea floor and vertical displacement of water (4) Sudden change in the monsoon wind

Last Answer : (3) Deformation of sea floor and vertical displacement of water Explanation: Earthquakes, volcanic eruptions and other underwater explosions (including detonations of underwater nuclear devices), landslides, ... the sea, the water above the deformed area is displaced from its equilibrium position.

The addition of antimony in tin-based alloys improves its (A) Rupture strength and hot hardness (B) Impact strength and bonding strength (C) Deformation resistance (D) Wear resistance

Description : The addition of antimony in tin-based alloys improves its (A) Rupture strength and hot hardness (B) Impact strength and bonding strength (C) Deformation resistance (D) Wear resistance

Last Answer : (C) Deformation resistance