The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as (A) Rigid (B) Tough (C) Ductile (D) Plastic

The materials which fracture even at small strains are termed as brittle,
while those materials which exhibit an appreciable deformation before
failure are termed as
(A) Rigid
(B) Tough
(C) Ductile
(D) Plastic
by

1 Answer

Answer :

Option C
by

Related questions

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Description : A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Last Answer : (A) Malleable

. A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Description : . A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Last Answer : (B) Ductile

Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Description : Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Last Answer : ductile substances

The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Description : The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Last Answer : d) Soft

Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Description : Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Last Answer : (D) The ability of a material to fracture without appreciable deformation is called its ductility

Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Description : Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Last Answer : All the above

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Description : Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Last Answer : (A) Brittle

Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Description : Steel produced from phosphatic iron is __________ in nature. (A) Malleable (B) Ductile (C) Brittle (D) Tough

Last Answer : (C) Brittle

Which theories of failure are used for (a) ductile materials, and (B) brittle materials ?

Description : Which theories of failure are used for (a) ductile materials, and (B) brittle materials ?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory, and maximum energy of distortion theory; while for brittle materials, theory of maximum principal stress, and maximum strain are used.

Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Description : Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory and maximum energy of distortion theory; For brittle materials, the theory of maximum principal stress and maximum strain are used.

List at least two factors that promote transition from ductile to brittle fracture.

Description : List at least two factors that promote transition from ductile to brittle fracture.

Last Answer : Manner of loading, and the rate of loading promote transition from ductile to brittle frac¬ture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed but if load is applied at a high velocity then failure may be brittle.

List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Description : List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Last Answer : The manner of loading and the rate of loading promote the transition from ductile to brittle fracture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed, but if the load is applied at a high velocity then failure may be brittle.

Distinguish Between Brittle Fracture And Ductile Fracture?

Description : Distinguish Between Brittle Fracture And Ductile Fracture?

Last Answer : In brittle fracture, crack growth is up to a small depth of the material. In ductile fracture large amount of plastic deformation is present to a higher depth.

Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Description : Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Last Answer : (C) Creep

Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Description : Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Last Answer : (B) Brittle

A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

Fibrous fracture is normally encountered in the __________ materials. (A) Hard (B) Elastic (C) Ductile

Description : Fibrous fracture is normally encountered in the __________ materials. (A) Hard (B) Elastic (C) Ductile

Last Answer : Option C

Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Description : Charpy impact tests showing a rough torn surface after the completed test, this would indicate which type of failure? a) Fatigue b) Ductile c) Fatigue to ductile d) Brittle

Last Answer : b) Ductile

What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Description : What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Last Answer : i) Reliability – elastic modulus and yield strength. ii) Strength (for no plastic deformation under static loading) – yield point. iii) Strength (overload) – Toughness and impact resistance. iv) Wear resistance – Hardness. v) Reliability and safety – Endurance limit and yield.

Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (a) Ductile materials

Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum total strain energy theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

Maximum principal strain theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum principal strain theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

Maximum shear stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials

Description : Maximum shear stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials

Last Answer : (a) Ductile materials

Maximum principal stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Description : Maximum principal stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None

Last Answer : (b) Brittle materials

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

Theories of elastic failure while dealing with ductile materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Description : Theories of elastic failure while dealing with ductile materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Last Answer : (b) Yield stress

Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Description : Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Last Answer : c) Brittle and high dielectric constant

Theories of elastic failure while dealing with brittle materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Description : Theories of elastic failure while dealing with brittle materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Last Answer : (a) Ultimate stress

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Description : A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Last Answer : (A) Drawn into wires

Increasing sulphur content in pig iron tends to make it (A) Soft (B) Hard (C) Tough (D) Ductile & malleable

Description : Increasing sulphur content in pig iron tends to make it (A) Soft (B) Hard (C) Tough (D) Ductile & malleable

Last Answer : Option B

There is sufficient plastic deformation prior to fatigue failure, which gives a warning well in advance. a) True b) False

Description : There is sufficient plastic deformation prior to fatigue failure, which gives a warning well in advance. a) True b) False

Last Answer : b) False

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

__________ test is the appropriate test to determine whether a material is ductile or brittle. (A) Impact (B) Cupping (C) Hardness (D) Tensile

Description : __________ test is the appropriate test to determine whether a material is ductile or brittle. (A) Impact (B) Cupping (C) Hardness (D) Tensile

Last Answer : (A) Impact

Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Description : Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Last Answer : Option C

Newer plastic materials for packaging contain cornstarch, which makes them more ____. a. sanitary c. expensive b. tough d. biodegradable

Description : Newer plastic materials for packaging contain cornstarch, which makes them more ____. a. sanitary c. expensive b. tough d. biodegradable

Last Answer : d. biodegradable

The phenomenon of decreased resistance of the materials to fluctuating stresses is the main characteristic of _____ failure. a) Fracture b) Fatigue c) Yielding d) None of the mentioned

Description : The phenomenon of decreased resistance of the materials to fluctuating stresses is the main characteristic of _____ failure. a) Fracture b) Fatigue c) Yielding d) None of the mentioned

Last Answer : b) Fatigue

During which step of cellular carcinogenesis do cellular changes exhibit increased malignant behavior? a) Progression During this third step, cells show a propensity to invade adjacent tissues and metastasize. b) Promotion During promotion, repeated exposure to promoting agents causes the expression of abnormal genetic information even after long latency periods. c) Initiation During this first step, initiators such as chemicals, physical factors, and biologic agents escape normal enzymatic mechanisms and alter the genetic structure of cellular DNA. d) Prolongation No stage of cellular carcinogenesis is termed prolongation.

Description : During which step of cellular carcinogenesis do cellular changes exhibit increased malignant behavior? a) Progression During this third step, cells show a propensity to invade adjacent tissues and ... of cellular DNA. d) Prolongation No stage of cellular carcinogenesis is termed prolongation.

Last Answer : a) Progression During this third step, cells show a propensity to invade adjacent tissues and metastasize.

'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : (3) has higher elasticity Explanation: A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. Steel is an alloy made by combining iron and other elements, the most common of these being carbon.

In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Description : In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Last Answer : a) Ductile material under static load

What Is Ductile-brittle Transition Temperature?

Description : What Is Ductile-brittle Transition Temperature?

Last Answer : It is the temperature below which the tendency of a material to fracture increases rather than forming. Below this temperature the material loses its ductility. It is also called Nil Ductility Temperature

The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Description : The substance which break just after elastic limit: a) Ductile b) Brittle c) Soft d) Hard

Last Answer : d) Hard

Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Description : Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Last Answer : b) For a brittle material

'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : has higher elasticity

Define factor of safety for ductile and brittle material.

Description : Define factor of safety for ductile and brittle material.

Last Answer : Factor of safety for ductile material: It is defined as ratio of yield stress to the working stress or  Factor of safety for Brittle material : It is defined as ratio of ultimate stress to the working stress /permissible /design stress or

During a tensile test on a ductile material (A) Nominal stress at fracture is higher than the ultimate stress (B) True stress at fracture is higher than the ultimate stress (C) True stress at fracture is the same as the ultimate stress (D) None of these

Description : During a tensile test on a ductile material (A) Nominal stress at fracture is higher than the ultimate stress (B) True stress at fracture is higher than the ultimate stress (C) True stress at fracture is the same as the ultimate stress (D) None of these

Last Answer : (B) True stress at fracture is higher than the ultimate stress

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength