Sketch axis orientation for CNC lathe.

Sketch axis orientation for CNC lathe.
by

1 Answer

Answer :

image

Fig. Axis Orientation of CNC Lathe 

by

Related questions

Sketch axis orientation for VMC

Description : Sketch axis orientation for VMC

Last Answer : Fig. Axis orientation for VMC

Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Description : Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Last Answer : Justification of tool inserts: The tools with indexible inserts of harder and special grade carbide or ceramic materials. A wear resistant layer of Titanium nitride of Titanium carbide is coated on the ... Symbol for tolerance 08: Turning insert nose radius G: symbol for fixing for chip breaker

Discuss functions of flux used to welding. Identify properties of material suitable for flux and state two materials used as flux.

Description : Discuss functions of flux used to welding. Identify properties of material suitable for flux and state two materials used as flux.

Last Answer : Functions of flux 1. A flux is a material used for removal of oxides and other undesirable substances. 2. Flux is a material used to prevent dissolve or facilitate removal of oxide. 3. ... in liquid 5. For welding alloy steel:- Mixture of boric acid , Dehydrated borax and calcium fluorides

Enlist four factors affecting selection of cleaning process.

Description : Enlist four factors affecting selection of cleaning process.

Last Answer : 1. Type of Contaminants 2. Composition of metal 3. Thickness of rust and scale 4. Degree of cleanliness required 5. Condition of metal 6. Surface finish tolerances 7. Allowable metal loss.

List four advantage of welding.

Description : List four advantage of welding.

Last Answer : Advantages of welding process 1) It produce permanent joint. 2) Large number of metals can be welded. 3) Freedom in design. 4) Strong and tight joining 5) Cost effectiveness 6) Simplicity of welded structures design 7) Welding processes may be mechanized and automated

State any four names of die accessories.

Description : State any four names of die accessories.

Last Answer : List of die accessories:-  1. Stop 2. stripper 3. pilot 4. knock out 5. Pressure pad

List four automotive components manufactured by press work.

Description : List four automotive components manufactured by press work.

Last Answer : Four automotive components produced by press work: Washer, switch panels, automotive body panels, motor cover bracket, steel net, cage, filters, fuel tank, filter cap, brackets, wheel rims, cover plates, clamps, frames, channels, side panel, door panels, bonnets, fenders.

Define forging.

Description : Define forging.

Last Answer : Definition of Forging: Forging can be defined as the controlled plastic deformation of metals at elevated temperatures in to a predetermined size or shape using compressive forces exerted, through some type ... & shaping it in dies under the pressure of heavy hammers, forging machines & presses.

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Last Answer : c.CNC machine

Where can I buy parts for a CNC lathe?

Description : Where can I buy parts for a CNC lathe?

Last Answer : Chances are if you search for CNC Lathe on ebay or Craigslist you'll be able to find out what you need. There are a variety of equipment available on these sites.

“CNC machine is having higher productivity than general lathe machine” Justify the statement.

Description : “CNC machine is having higher productivity than general lathe machine” Justify the statement.

Last Answer : CNC machining and conventional machining aim to achieve the same end, and both start with a raw chunk of metal or plastic and shape it into a part. CNC machine is having higher productivity than ... to cut the part, while the conventional machine would require five tools and no doubt more time.

Describe with neat sketch specification of lathe machine.

Description : Describe with neat sketch specification of lathe machine.

Last Answer : 1. The height of the centers measured from the lathe bed. 2. The swing diameter over bed. This is the largest diameter of work that will revolve without touching the bed and is twice the height of ... 6. The length of bed. This indicates the approximate floor space occupied by the lathe. 

Explain axes identification of CNC machine with neat sketch

Description : Explain axes identification of CNC machine with neat sketch

Last Answer : The first axis to be identified is the Z axis. This is then followed by the X and Y axes respectively. Z axis and motion: Location: The Z axis motion is either along the spindle axis or ... which advance right-hand screws in the positive X, Y and Z directions respectively. 

With neat sketch explain the working principle of CNC machines.

Description : With neat sketch explain the working principle of CNC machines. 

Last Answer : Working Principle of CNC machine:- A CNC machine also has a tape reader or any other input media for entry of the part program. CNC uses the part program in a different manner though there is ... to the reference. These two signals are compared and necessary action is controlled.   Or  

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

Draw and explain axis configuration as per ISO, for horizontal spindle CNC machines.

Description : Draw and explain axis configuration as per ISO, for horizontal spindle CNC machines.

Last Answer : Axis Configuration for Horizontal Spindle CNC Machines: The first axis to be identified is the Z axis. This is then followed by the X and Y axes respectively. Z Axis and ... are in the directions which advance right-hand screws in the positive X, Y and Z directions respectively.  

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Description : In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Last Answer : a.= 𝜋𝐷𝑁/1000

An item is made from lead blanks in a lathe shop. Each blank suffices for 1 item. Lead shavings accumulated for making 6 items can be melted and made into a blank. How many items can be made from 36 blanks? -Riddles

Description : An item is made from lead blanks in a lathe shop. Each blank suffices for 1 item. Lead shavings accumulated for making 6 items can be melted and made into a blank. How many items can be made from 36 blanks? -Riddles

Last Answer : From 36 blanks there are 36 items made. The lead shavings are enough to make 6 blanks. Which make 6 more items. But don't stop here. The new shavings are good for 1 more item. Total: 43.

What is the function of the tailstock on a lathe?

Description : Can you please write me what a tailstock is used for?

Last Answer : The tailstock is used to support the workpiece. On the one hand, it holds in bugs and on the other, after drilling, it leans into a pony.

What speed on a lathe for a smaller piece.

Description : I inherited a lathe, The smaller I machine the smaller the speed or the smaller the smaller the piece?

Last Answer : This cannot be determined. It depends on the material on the tools used and also on the lathe itself.

Why is it called a center lathe?

Description : Why is it called centric?

Last Answer : Because the workpiece is clamped between the points (or chuck and point).

What are the parts of a lathe machine?

Description : What are the parts of a lathe machine?

Last Answer : lathes all eff the identical pervasive operable parts, symmetrical tho' the unique locating or forge of a confident division may dissent from one shaper The bed is the foot of the excavation parts of the lathe ... to a track or block scheme or to a meshed system. The water mandrel is mounted on b

The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Description : The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Last Answer : Answer: B

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Description : machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Last Answer : Combine 

Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Last Answer : Tractor and bullock

Mini Lathe Benefits

Description : Mini Lathe Benefits

Last Answer : When Small is Big It doesn't take a genius to realize the many benefits of the so-called mini lathes. If anything, mini lathes are the epitome of the idea that less is more, smaller is ... and a frequent traveler at the same time, you should really consider getting yourself a mini lathe instead.

Mini Lathe Attachments

Description : Mini Lathe Attachments

Last Answer : Light Milling A simple mini lathe can function by itself, pretty much, the way a standard lathe should. It does the basic functions, and if your mini lathe is of high quality, it does them ... complete. A good all-around mini lathe is one with a complete set of attachments for every situation.

Mini Lathe Applications

Description : Mini Lathe Applications

Last Answer : Don't Go Cutting Lathes more than just come in different shapes and sizes; they come with various features and functions too. Take the case of the woodworking lathe. As its name suggests, ... standard lathe, but mini lathes more than make up for it with their size, convenience and portability.

How to Use a Lathe

Description : How to Use a Lathe

Last Answer : How to Use a Lathe A lathe is a tool used for forming different types of materials, like wood and metal, into various shapes. There are several kinds of lathe. Before you start using one, ... not attempt to operate a lathe without at least reading the instruction manual or asking someone for help.

State four operations performed by the lathe.

Description : State four operations performed by the lathe.

Last Answer : Operations performed on lathe machine  1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling

List the main four parts of a lathe

Description : List the main four parts of a lathe 

Last Answer : Parts of Lathe Machines are as follows :  1. Bed 2. Head stock 3. Carriage 4. Main spindle 5. Tailstock 6. Tool post 7. Compound Rest 8. Cross slide 9. Saddle.

Explain the lathe specification or size of lathe.

Description : Explain the lathe specification or size of lathe.

Last Answer : The size of a lathe is expressed or specified by the following items and illustrated in Fig. The height of the centers measured from the lathe bed. The swing diameter over bed. This is the ... is the maximum diameter of bar stock that will pass through hole of the headstock spindle. 

Write down the basic parts of a lathe machine with their proper functions.

Description : Write down the basic parts of a lathe machine with their proper functions. 

Last Answer : Important Parts of Lathe and their Functions 1. Bed It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and ... carriage on bed. 12. Spindle: It is the main part of lathe which holds and rotates the chuck.

Write down the steps involved for internal thread cutting on lathe machine.

Description : Write down the steps involved for internal thread cutting on lathe machine.

Last Answer : Steps involved for internal thread cutting on lathe machine  1) Hole is first bored to the root diameter of the thread. 2) Tool is fixed on the tool post or on the boring bar adjusted the angle of ... the start. 10) Keep going until the calculated depth of cut has been reached on the top slide.

Write four operations performed on Lathe /machine.

Description : Write four operations performed on Lathe /machine.

Last Answer : Operations Performed on Lathe Machine are: 1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling. 

List any four accessories used on lathe.

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

Can Arduino be used for building a CNC machine?

Description : Can Arduino be used for building a CNC machine?

Last Answer : Yes, Arduino can be used for building a CNC (Computer Numerical Control) machine by using stepper motors to control the movement of the cutting tool, and by using sensors and actuators to monitor and adjust the cutting process.

Can Arduino be used for building a CNC machine?

Description : Can Arduino be used for building a CNC machine?

Last Answer : Yes, Arduino can be used for building a CNC machine by using stepper motor drivers to control the motion of the machine's axes, and by using communication modules to receive instructions from a computer or other device.

Can I use Arduino for CNC machines?

Description : Can I use Arduino for CNC machines?

Last Answer : Yes, Arduino can be used for CNC machines by controlling the movement and operation of the machine's components, allowing for precise control and operation of the machine.

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Description : Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Last Answer : c.G92

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41