What speed on a lathe for a smaller piece.

I inherited a lathe, The smaller I machine the smaller the speed or the smaller the smaller the piece?
by

1 Answer

Answer :

This cannot be determined. It depends on the material on the tools used and also on the lathe itself.
by

Related questions

In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Description : In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Last Answer : a.= 𝜋𝐷𝑁/1000

In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Last Answer : c.CNC machine

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

An item is made from lead blanks in a lathe shop. Each blank suffices for 1 item. Lead shavings accumulated for making 6 items can be melted and made into a blank. How many items can be made from 36 blanks? -Riddles

Description : An item is made from lead blanks in a lathe shop. Each blank suffices for 1 item. Lead shavings accumulated for making 6 items can be melted and made into a blank. How many items can be made from 36 blanks? -Riddles

Last Answer : From 36 blanks there are 36 items made. The lead shavings are enough to make 6 blanks. Which make 6 more items. But don't stop here. The new shavings are good for 1 more item. Total: 43.

What is the function of the tailstock on a lathe?

Description : Can you please write me what a tailstock is used for?

Last Answer : The tailstock is used to support the workpiece. On the one hand, it holds in bugs and on the other, after drilling, it leans into a pony.

Why is it called a center lathe?

Description : Why is it called centric?

Last Answer : Because the workpiece is clamped between the points (or chuck and point).

Where can I buy parts for a CNC lathe?

Description : Where can I buy parts for a CNC lathe?

Last Answer : Chances are if you search for CNC Lathe on ebay or Craigslist you'll be able to find out what you need. There are a variety of equipment available on these sites.

What are the parts of a lathe machine?

Description : What are the parts of a lathe machine?

Last Answer : lathes all eff the identical pervasive operable parts, symmetrical tho' the unique locating or forge of a confident division may dissent from one shaper The bed is the foot of the excavation parts of the lathe ... to a track or block scheme or to a meshed system. The water mandrel is mounted on b

The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Description : The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Last Answer : Answer: B

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Description : machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Last Answer : Combine 

Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Last Answer : Tractor and bullock

Mini Lathe Benefits

Description : Mini Lathe Benefits

Last Answer : When Small is Big It doesn't take a genius to realize the many benefits of the so-called mini lathes. If anything, mini lathes are the epitome of the idea that less is more, smaller is ... and a frequent traveler at the same time, you should really consider getting yourself a mini lathe instead.

Mini Lathe Attachments

Description : Mini Lathe Attachments

Last Answer : Light Milling A simple mini lathe can function by itself, pretty much, the way a standard lathe should. It does the basic functions, and if your mini lathe is of high quality, it does them ... complete. A good all-around mini lathe is one with a complete set of attachments for every situation.

Mini Lathe Applications

Description : Mini Lathe Applications

Last Answer : Don't Go Cutting Lathes more than just come in different shapes and sizes; they come with various features and functions too. Take the case of the woodworking lathe. As its name suggests, ... standard lathe, but mini lathes more than make up for it with their size, convenience and portability.

How to Use a Lathe

Description : How to Use a Lathe

Last Answer : How to Use a Lathe A lathe is a tool used for forming different types of materials, like wood and metal, into various shapes. There are several kinds of lathe. Before you start using one, ... not attempt to operate a lathe without at least reading the instruction manual or asking someone for help.

Sketch axis orientation for CNC lathe.

Description : Sketch axis orientation for CNC lathe.

Last Answer : Fig. Axis Orientation of CNC Lathe 

Describe with neat sketch specification of lathe machine.

Description : Describe with neat sketch specification of lathe machine.

Last Answer : 1. The height of the centers measured from the lathe bed. 2. The swing diameter over bed. This is the largest diameter of work that will revolve without touching the bed and is twice the height of ... 6. The length of bed. This indicates the approximate floor space occupied by the lathe. 

State four operations performed by the lathe.

Description : State four operations performed by the lathe.

Last Answer : Operations performed on lathe machine  1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling

List the main four parts of a lathe

Description : List the main four parts of a lathe 

Last Answer : Parts of Lathe Machines are as follows :  1. Bed 2. Head stock 3. Carriage 4. Main spindle 5. Tailstock 6. Tool post 7. Compound Rest 8. Cross slide 9. Saddle.

Explain the lathe specification or size of lathe.

Description : Explain the lathe specification or size of lathe.

Last Answer : The size of a lathe is expressed or specified by the following items and illustrated in Fig. The height of the centers measured from the lathe bed. The swing diameter over bed. This is the ... is the maximum diameter of bar stock that will pass through hole of the headstock spindle. 

“CNC machine is having higher productivity than general lathe machine” Justify the statement.

Description : “CNC machine is having higher productivity than general lathe machine” Justify the statement.

Last Answer : CNC machining and conventional machining aim to achieve the same end, and both start with a raw chunk of metal or plastic and shape it into a part. CNC machine is having higher productivity than ... to cut the part, while the conventional machine would require five tools and no doubt more time.

Write down the basic parts of a lathe machine with their proper functions.

Description : Write down the basic parts of a lathe machine with their proper functions. 

Last Answer : Important Parts of Lathe and their Functions 1. Bed It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and ... carriage on bed. 12. Spindle: It is the main part of lathe which holds and rotates the chuck.

Write down the steps involved for internal thread cutting on lathe machine.

Description : Write down the steps involved for internal thread cutting on lathe machine.

Last Answer : Steps involved for internal thread cutting on lathe machine  1) Hole is first bored to the root diameter of the thread. 2) Tool is fixed on the tool post or on the boring bar adjusted the angle of ... the start. 10) Keep going until the calculated depth of cut has been reached on the top slide.

Write four operations performed on Lathe /machine.

Description : Write four operations performed on Lathe /machine.

Last Answer : Operations Performed on Lathe Machine are: 1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling. 

List any four accessories used on lathe.

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

A piece of paper is in the shape of a right-angled triangle and is cut along a line that is parallel to the hypotenuse, leaving a smaller triangle. -Maths 9th

Description : A piece of paper is in the shape of a right-angled triangle and is cut along a line that is parallel to the hypotenuse, leaving a smaller triangle. -Maths 9th

Last Answer : (d) 14.365Given, ST || RQ∴ \(rac{ ext{Area of ΔSPT}}{ ext{Area of ΔRPQ}}\) = \(rac{ST^2}{RQ^2}\)Also, given ST = \(\bigg(1-rac{35}{100}\bigg)RQ\) = (0.65) RQ∴ \(rac{ST}{RQ}\) = 0.65 ⇒ \(\bigg(rac ... ΔRPQ}}\) = 0.4225 ⇒ \(rac{ ext{Area of ΔSPT}}{{34}}\) = 0.4225⇒ Area of ΔSPT = 0.4225 x 34 = 14.365

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one over the radius squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Description : Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one ... squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Last Answer : ANSWER: W -- ZERO

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose governor has the zero speed droop setting will _____________. A. assume the smaller share of the load B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Description : Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose ... B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Last Answer : Answer: B

Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above

Description : Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

An electron and a proton are moving at the same speed in circular paths in the same uniform magnetic field. The radius of the path of the proton is one of the following. Is this radius: w) the same as that of the electron x) about 2000 times larger than that of the electron y) a little larger than that of the electron z) smaller than that of the electron

Description : An electron and a proton are moving at the same speed in circular paths in the same uniform magnetic field. The radius of the path of the proton is one of the following. Is this radius: w) the same ... of the electron y) a little larger than that of the electron z) smaller than that of the electron

Last Answer : ANSWER: X -- ABOUT 2000 TIMES LARGER THAN THAT OF THE ELECTRON

We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Description : We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Last Answer : it takes equal time for revolution around the earth and rotation on its own axis