Description : Which of the following ions is most effective in the coagulation of an arsenious suphide solution?
Last Answer : Which of the following ions is most effective in the coagulation of an arsenious suphide solution? A. `K^(+)` B. `Mg^(2+)` C. `Al^(3+)` D. `C`
Description : Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these
Last Answer : (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide)
Description : If we add equimolar amounts of ferric hydroxide sol and arsenic sulphide sol, what will happen ?
Last Answer : Ans. Both the sols will get coagulated.
Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)
Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)
Description : Is an acid a substance that forms hydroxide ions in a water solution?
Last Answer : Acids forms the ion H+.
Description : For coagulation of arsenious sulphide sol, which one of the following salt solution will be most effective ?
Last Answer : For coagulation of arsenious sulphide sol, which one of the following salt solution will be most effective ? A. `Na_( ... (3)` C. `BaCl_(2)` D. `NaCl`
Description : 1 mole of `OH^(-)` ions is obtained from 85 g of hydroxide of a metal. What is the equivalent weight of the metal ?
Last Answer : 1 mole of `OH^(-)` ions is obtained from 85 g of hydroxide of a metal. What is the equivalent weight of the metal ?
Description : What statement about Arrhenius acids is FALSETheir aqueous solutions are electrolytesTheir water solutions are called aqueous acids They increase the concentration of hydroxide ions in aqueous solutionThey are molecular compounds with hydrogen ions?
Last Answer : The answer is: They increase the concentration of hydroxide ions in aqueous solution.
Description : Acids generate: (1) Acids generate hydrogen ions. (2) Bases generate hydroxide ions. (3) Both are correct (4) Both are incorrect
Last Answer : (3) Both are correct Explanation: Acids, in presence of water, give hydrogen ions (H+). Similarly, bases generate hydroxide (OH-) ions in water.
Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption
Last Answer : D. ion resonance absorption
Description : It is caused by hydroxide ions in the material
Last Answer : ion resonance absorption
Description : The complete combustion of one mole of hydrogen produces: w) 1/2 mole H2O x) 1/2 mole H2O + 1/2 mole O3 y) 1 mole water z) 1 mole hydroxide ions
Last Answer : ANSWER: Y -- 1 MOLE WATER
Description : An Arrhenius acid is a substance that: w) donates protons x) accepts protons y) donates hydrogen ions to water z) donates hydroxide ions to water
Last Answer : ANSWER: Y -- DONATES HYDROGEN IONS TO WATER
Description : Ammonia can be considered a Lewis base because it can donate: w) electrons x) protons y) hydronium ions z) hydroxide ions
Last Answer : ANSWER: A -- ELECTRONS
Description : Which of the following anions will have minimum flocculation value for the ferric oxide solution?
Last Answer : Which of the following anions will have minimum flocculation value for the ferric oxide solution? A. `Cl^(-)` B. `Br^( ... 2-)` D. `[Fe(CN)_(6)]^(3-)`
Description : A solution of sodium thiosulphate on addition of few drops of ferric chloride gives violet colour due to the formation of
Last Answer : A solution of sodium thiosulphate on addition of few drops of ferric chloride gives violet colour due to the formation of ... `Fe_(2)(S_(2)O_(3))_(2)`
Description : Which is the best and the most effective method for the removal of organic contaminant present in the polluted water in very small quantity (say < 200 mg/litre)? (A) Lagooning (B) Activated carbon adsorption (C) Biological oxidation pond (D) Chemical coagulation
Last Answer : (B) Activated carbon adsorption
Description : For the coagulation of 200 mL of `As_(2)S_(3)` solution, 10 mL of 1 M NaCl is required. What is the coagulating value (number of milli moles of solute
Last Answer : For the coagulation of 200 mL of `As_(2)S_(3)` solution, 10 mL of 1 M NaCl is required. What is the coagulating ... A. `200` B. `100` C. `50` D. `25`
Description : When chlorine reacts with cold and dilute solution of sodium hydroxide, the products obtained are
Last Answer : When chlorine reacts with cold and dilute solution of sodium hydroxide, the products obtained are A. (1) `ClO_2^ ... ClO_2^-` D. `ClO^-` and `ClO_3^-`
Description : A metal salt solution gives a yellow precipitate with silver nitrate. The precipitate dissolves in dilute nitric acid as well as in ammonium hydroxide
Last Answer : A metal salt solution gives a yellow precipitate with silver nitrate. The precipitate dissolves in dilute nitric acid as ... (3-)` D. `SO_(4)^(2-)`
Description : What is the colour of indicator in sodium hydroxide solution?
Last Answer : The pH-paper Merck Art. 9565 is red to violet.
Description : Is sodium hydroxide solution hazardous?
Last Answer : It is. Solutions of concentration 0.5M or greater should be labelled 'corrosive' and more dilute solutions as 'irritant'.
Description : The pH value of 12 may be of an aqueous solution of 1. Sodium hydroxide 2. Lithium hydroxide 3. Sodium chloride 4. Hydrogen chloride The correct statements are: (a) 1 and 2 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4
Last Answer : Ans:(a)
Description : What product is formed when electricity is passed throughan aqueous solution of sodium chloride? (1) Sodium and water (2) Sodium oxide (3) Sodium and chlorine (4) Sodium hydroxide
Last Answer : (4) Sodium hydroxide Explanation: When electricity is passed through an aqueous solution of sodium chloride, it gives hydrogen, chlorine and sodium hydroxide as a product.
Description : Solution used in Doctor's treatment for the removal of mercaptans is (A) Sodium hydroxide (B) Sodium plumbite (C) Cupric chloride (D) Potassium isobutyrate
Last Answer : (B) Sodium plumbite
Description : What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.
Last Answer : a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. After a few hours a coating of copper is seen on iron nail/plate. It is based on displacement reaction. ... on the inner walls of the test tube. Aldehyde group in glucose reduced silver nitrate to metallic silver.
Description : A metal carbonate X on reacting with an acid gives a gas which when passed through a solution Y gives carbonate back..Identify X and Y. (a) X is sodium carbonate and Y is Sodium hydroxide (b) X ... Y is calcium hydroxide (c ) X is Potassium carbonate and Y is Potassium hydroxide. (d) None of above
Last Answer : (b) X is Calcium carbonate and Y is calcium hydroxide
Description : An aqueous solution turns red litmus solution blue. Excess addition of which of the following solution would reverse the change? (a) Baking powder (b) Lime (c) Ammonium hydroxide solution (d) Hydrochloric acid
Last Answer : (d) Hydrochloric acid
Description : Brine is an a) aqueous solution of sodium hydroxide b) aqueous solution of sodium carbonate c) aqueous solution of sodium chloride d) aqueous solution of sodium bicarbonate
Last Answer : c) aqueous solution of sodium chloride
Description : In flue gas analysis by Orsat's apparatus, oxygen is absorbed by (A) Potassium hydroxide (B) Cuprous chloride (C) Alkaline pyrogallol solution
Last Answer : (C) Alkaline pyrogallol solution
Description : In flue gas analysis by Orsat's apparatus, carbon dioxide is absorbed by (A) Potassium hydroxide (B) Dilute potassium carbonate (C) Cuprous chloride (D) Alkaline pyrogallol solution
Last Answer : (A) Potassium hydroxide
Description : In flue gas analysis by Orsat's apparatus, carbon monoxide is absorbed by (A) Cuprous chloride (B) Potassium hydroxide (C) Alkaline pyrogallol solution (D) None of these
Last Answer : (A) Cuprous chloride
Description : 45. When Cl2 gas reacts with hot and concentrated sodium hydroxide solution, the oxidation number of chlorine changes from (1) Zero to + 1 and zero to –3 (2) Zero to +1 and zero to –5 (3) Zero to –1 and zero to + 5 (4) Zero –1 and zero to + 3
Last Answer : Zero to –1 and zero to + 5
Description : Which of the following aqueous solutions would hav the lowest boiling point? Would it be a 1.0 molal solution of: w) Hydrochloric acid x) Sodium Hydroxide y) Acetic Acid, z) Magnesium Chloride
Last Answer : ANSWER: Y -- ACETIC ACID
Description : The pH of a 0.005 molar solution of calcium hydroxide is:
Last Answer : ANSWER: 12
Description : The hydrolysis of a fat using a solution of a strong hydroxide is called: w) neutralization x) esterification y) saponification z) condensation
Last Answer : ANSWER: Y -- SAPONIFICATION
Description : Which of the following is NOT a general property of hydroxide bases in aqueous solution? w) High solubility x) Bitter taste y) Ability to neutralize aqueous acid solutions z) Ability to change phenolphthalein from colorless to red
Last Answer : ANSWER: W -- HIGH SOLUBILITY (The hydroxides of the alkali metals are soluble in water but all the other metal hydroxides are only moderately or sparingly soluble.)
Description : Can I mix granulated ferric oxide with granulated carbon in a media bag? Or does it have to be separate?
Last Answer : It’s the same water that goes through them whether they are separate or not. I had my marine tank in the dark ages, so I am no longer an expert, but it seems to me that carbon is non-reactive, and gfo is already oxidized; I don’t see what difference it can make.
Last Answer : : Fe2O3.nH2O signal of wet ferric oxide
Last Answer : : The signal of ferric chloride is FeCl3
Description : Ferric chloride is applied to stop bleeding cut because
Last Answer : Ferric chloride is applied to stop bleeding cut because A. `Fe^(3+)` coagulates blood which ... (-)` coagulates blood which is negatively charged sol
Description : Bleeding is stopped by the application of ferric chloride. This is because
Last Answer : Bleeding is stopped by the application of ferric chloride. This is because A. the blood starts ... D. the ferric chloride seals the blood vessel.
Description : In which of the following conversions all the three oxygen atoms of `O_(3)` molecules are utilised for oxidation: I. Ferrous oxide to ferric oxide II.
Last Answer : In which of the following conversions all the three oxygen atoms of `O_(3)` molecules are utilised for ... and IV only D. II, III and IV only
Description : Can you use ferric acid on stainless steel?
Last Answer : Yes, it is possible; the correct name is iron(III) chloride.
Description : Which of the following statements regarding red soils of India is/are correct? 1. The colour of the soil is-red due to ferric oxide content. 2. Red soils are rich in lime, humous and potash. 3. They are porous and have friable ... OS2011] (a) 1 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3
Last Answer : Ans: (b)
Description : What is the state of iron in transferrin? (A) Ferrous form (B) Ferric form (C) Both A and B (D) None of these
Last Answer : Answer : B
Description : Molecular iron (Fe) is (A) Stored primarily in spleen (B) Absorbed in the intestine (C) Absorbed in the ferric, Fe+++ form (D) Stored in the body in combination with ferritin
Last Answer : Answer : D
Description : Molecular iron is (A) Stored primarily in the spleen (B) Exreted in the urine as Fe2+ (C) Stored in the body in combination with ferritin (D) Absorbed in the ferric form
Last Answer : Answer : C
Description : Which of the following is responsible for the extra strength of pyrex glass? (1) Potassium Carbonate (2) Lead Oxide (3) Borax (4) Ferric Oxide
Last Answer : (3) Borax Explanation: Older clear-glass Pyrex manufactured by Corning before 1998, Arc International's Pyrex products, and Pyrex laboratory glassware is made of borosilicate glass. According ... glass cookware manufactured by World Kitchen is made of tempered sodalime glass instead of borosilicate.