State any two names of materials used in precast concrete

State any two names of materials used in precast concrete
by

1 Answer

Answer :

1. Cement

2. Sand

3. Steel

4. Water

5. Polystyrene

6. Fly ash.

7. Ground granulated blast furnace slag
by

Related questions

State any four advantages and four disadvantages of precast concrete.

Description : State any four advantages and four disadvantages of precast concrete.

Last Answer : Advantages: 1. Very rapid speed of erection 2. Good quality control 3. Entire building can be precast-walls, floors, beams, etc. 4. Rapid construction on site 5. High quality because of ... is required in the application of the panel on site. 11. Cranes are required to lift panels.

State any four precast non-structural components that can be used for speedy construction.

Description : State any four precast non-structural components that can be used for speedy construction.

Last Answer : 1. Architectural Precast 2. Insulated Architectural Cladding 3. Insulated Wall Panels 4. Column Covers 5. Precast Concrete Light Wall 6. Precast Concrete Spandrels 7. Precast Concrete Solid Walls 8. Stormwater Deflector 9. Façade 10. Concrete panels for partition walls 11. Concrete planks

Describe any two design considerations for Precast Canal lining.

Description : Describe any two design considerations for Precast Canal lining.

Last Answer : 1. Precast concrete slabs, laid properly on carefully prepared sub-grades and with the joints, effectively sealed, constitute a serviceable type of lining. The precast slabs are about 5 to ... . However, seepage losses are obviously more. Transportation of precast slabs may contribute to breakage. 

Justify the necessity of use of high-grade materials in prestressed concrete.

Description : Justify the necessity of use of high-grade materials in prestressed concrete.

Last Answer : 1) If mild steel is used, the working stress in it (i.e. 140 N/mm2) is more or less completely lost due to elastic deformation, creep and shrinkage of concrete. 2) The ... structural elements. With reduced dead weight of the material, larger spans become technically and economical practicable. 

State the advantages and disadvantages of prestressed concrete.

Description : State the advantages and disadvantages of prestressed concrete.

Last Answer : Advantages: 1. The c/s ismore efficiently used in fully prestressed members. 2. Dead loads are reduced considerably. 3. Improved shear resistance, due to the effect of compressive prestress, ... cube strength of 35 N/mm2 for Posttensioned system and 45 N/ mm2 for pretensioned system.

Define Prestressed concrete and state types of prestressing steel.

Description : Define Prestressed concrete and state types of prestressing steel.

Last Answer : Prestressed concrete: Prestressed concrete is basically a concrete in which internal stresses of a suitable magnitude and distribution are deliberately introduced so that the stresses resulting from external loads are ... 1962, and. 4) Uncoated stress relieved strand conforming to IS: 6006-1970. 

What is the basic principle of Prestressed concrete?

Description : What is the basic principle of Prestressed concrete?

Last Answer : Principle: The compressive stresses induced by high strength steel tendons in a concrete member before the application of load, will balance the tensile stresses imposed in the member during its service.

Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Description : Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Last Answer : Loss due to Friction: This loss occurs only in post-tensioned members. There always exists a certain amount of friction in the jacking and anchoring system and on the walls of the duct. So, ... over-extending the tendon in the prestressing operation by the amount of the draw - in before anchoring

Explain determination of Water absorption of paver block and state acceptable limits as per IS.

Description : Explain determination of Water absorption of paver block and state acceptable limits as per IS. 

Last Answer : Step 1. Saturation  The test specimen shall be completely immersed in water at room temperature for 24 * 2 h. The specimen then shall be removed from the water and allowed to drain for 1 min by ... more than 6 % by mass and in individual samples, the water absorption should be restricted to 7 %

State cable profile in simply supported rectangular beam section.

Description : State cable profile in simply supported rectangular beam section.

Last Answer : Cabe profile: In a prestressed concrete member, external type of loads is balanced by transverse component of suitable cable profile, on effect of loading the net deformation increases the stress, strain and length of the tendon, extension of tendon, increase in strain, increase in stress.

Describe with sketch any two joints in doors and window frame.

Description : Describe with sketch any two joints in doors and window frame.

Last Answer : 1. Connections must be adequate structurally. 2. Means of connections between adjacent must allow safe and speedy erection regardless of minor inherent inaccuracies in precast elements and in-situ concrete. 3. ... height) of the frames shall confirm to the requirements of IS : 4021-1976

For what type of structures do you recommend post-tensioning?

Description : For what type of structures do you recommend post-tensioning?

Last Answer : 1) High rise buildings. In long span slab where beam is not provided & the slab of assembly hall, cinema theaters etc. like structure where the distance between columns are more, then post ... Post Tensioning is used extensively for slabs on grade where soils are likely to move (expansive soils)

Explain freyssinet system of prestressing with respect to process and application with sketches.

Description : Explain freyssinet system of prestressing with respect to process and application with sketches.

Last Answer : Process: - 1. The freyssinet system was the first to be introduced among the post - tensioned system high tensile steel wires 5mm to 8mm diameter about 12 in number are arranged to form a group into a cable ... gas (LNG) storage tank 4. Off share platforms. 5. Wind turbine towers etc.

Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation.

Description : Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation. 

Last Answer : Noise pollution is the serious or more noise that may damage the activity or human life. The contribution of most outside noise is mainly due to building activities. Noise pollution affects both health and ... iv) Sleep interference v) Habit of talking loudly vi) Hearing loss vii) Concentration

Illustrate cable profiles for eccentric straight and parabolic cables with sketches.

Description : Illustrate cable profiles for eccentric straight and parabolic cables with sketches. 

Last Answer : i) Eccentric straight cable profile: The stress due to prestressing alone are generally combined stresses due to the action of direct load bending from an eccentrically applied load. In this case, the load is ... section as shown in the figure below. ii) Parabolic cable profile

Explain any one method of Prefab system.

Description : Explain any one method of Prefab system.

Last Answer : Prefab system: It refers to any part of a building that has been fabricated at a place other than its final location. For this reason, it can be referred to by other names such as off-site fabrication, ... If you need further assessing, feel free to contact us; your needs are all that matter to us.

Explain the procedure of the storage, transportation and erection of prefabricated building elements.

Description : Explain the procedure of the storage, transportation and erection of prefabricated building elements. 

Last Answer : Storage of pre-fabricated building elements: 1) Procurement storage of Unloading raw materials 2) Testing of raw materials 3) Design of concrete mix 4) Fabrication of reinforcement cages 5) ... differs with risk condition, hence skilled foremen, and workers to be employed on the job.

List the various types of losses of prestress in pretensioned pre-stressed member.

Description : List the various types of losses of prestress in pretensioned pre-stressed member.

Last Answer : i. Elastic shortening ii. Shrinkage of concrete iii. Creep of concrete iv. Relaxation of steel

Define Modules and modular co-ordination

Description : Define Modules and modular co-ordination

Last Answer : Modules: Modules are a standard unit of size used to coordinate the dimensions of buildings and components. They are of two types: 1. Multi modules 2. Basic modules  Modular Co-ordination: The modular ... for basic module is M 1M = 100mm 100 mm = 1M = It is international standard value.

State any two uses of precast concrete blocks.

Description : State any two uses of precast concrete blocks.

Last Answer : Uses of precast concrete block. 1. In parking areas, footpaths, on road to give pleasant look. 2. Fencing poles for fencing work. 3. It is used for loadbearing masonry, in earthquake zones. 4. Lightweight blocks for partition walls.

Various Benefits of Precast Concrete Construction ?

Description : Various Benefits of Precast Concrete Construction ?

Last Answer : Precast concrete is a concrete construction product that is made using molds under controlled process conditions. They are later on shipped to the construction sites for use. This technique ... of using these precast concrete products in various constructions. As compared to the concrete constructi

In joints of precast concrete bridge segments, what are the functions of applying epoxy adhesive?

Description : In joints of precast concrete bridge segments, what are the functions of applying epoxy adhesive?

Last Answer : Epoxy adhesive is applied in these joints for the following purposes according to International Road Federation (1977): (i) It seals up the joints completely between precast concrete segments to protect the ... in transferring of shear between the joints in case a large single shear key is used.

The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Last Answer : Answer: Option B

Under-reamed piles are generally (A) Driven piles (B) Bored piles (C) Precast piles (D) All the above

Description : Under-reamed piles are generally (A) Driven piles (B) Bored piles (C) Precast piles (D) All the above

Last Answer : (B) Bored piles

What are the properties of precast pavement blocks?

Description : What are the properties of precast pavement blocks? 

Last Answer : Properties of precast pavement blocks: i) It should have good dimensional stability. ii) It should have non-skid surface. iii)It should have good compressive strength from 20 N/mm2 to 50 N/ ... have good transverse strength (3 N/mm2 and above) vi) It should have average abrasion about 3mm 

For the supply of materials for concrete, form work reinforcing and placing of concrete, removal of form work and curing of concrete, number of bar(s) required on bar chart, is (A) 1 (B) 2 (C) 3 (D) 4

Description : For the supply of materials for concrete, form work reinforcing and placing of concrete, removal of form work and curing of concrete, number of bar(s) required on bar chart, is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (A) 1

For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

Cement used for normal concrete construction, is obtained by burning a mixture of (A) Siliceous and argillaceous materials (B) Argillaceous and calcareous materials (C) Siliceous and calcareous materials (D) Siliceous, argillaceous and calcareous materials

Description : Cement used for normal concrete construction, is obtained by burning a mixture of (A) Siliceous and argillaceous materials (B) Argillaceous and calcareous materials (C) Siliceous and calcareous materials (D) Siliceous, argillaceous and calcareous materials

Last Answer : Answer: Option D

Identical objects of four different materials are heated to the same high temperature. Which of the following would least likely burn your hand if touched?  a. aluminium  b. brass  c. glass  d. concrete

Description : Identical objects of four different materials are heated to the same high temperature. Which of the following would least likely burn your hand if touched?  a. aluminium  b. brass  c. glass  d. concrete

Last Answer : glass

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

List four materials used for filling joints in concrete.

Description : List four materials used for filling joints in concrete.

Last Answer : Materials used for filling joints; 1. Asphalt, tar, bituminous materials 2. Fibre and fibre products 3. Sponge rubber 4. Cork 5. Polymer 6. Thermoplastic 7. Glass

Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.

Description : Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.  

Last Answer : Requirements of good formwork:- 1. It should be adequately strong to withstand an extensive variety of dead and live loads. For instance, self-weight, weight of reinforcement, weight of wet concrete, loads of ... of concreting. 8. It should be lightweight. 9. It should be easy to remove.