Depict the effect of pre-fabricated building on the surrounding environment with respect to noise pollution, staking at elements and transportation. 

1 Answer

Answer :

Noise pollution is the serious or more noise that may damage the activity or human life. The contribution of most outside noise is mainly due to building activities. Noise pollution affects both health and human nature

Noise annoyance and corresponding problems, bring on noise pollutant through the process of building assemblage, and have come over exponentially significant.

This hassle can affect the workers, as well as the residencies.

Construction sites are a very common source of noise pollution. Construction and works related to demolition are mostly riotous and repeatedly take place in residential places (out of town). Construction noise is noise that arises from an activity at a construction site that includes; work due to demolition, work related to strategy, and building renewal work

Construction noise contributors include pneumatic equipment, air compressors, machine mounted percussion drills, loaders, trucks and breaking equipment.

Construction sites bring out lot of noise, mainly from heavy equipment and machinery used in construction field.

Over noise is virtually annoyance and confound to the humanity, but can lead to loss of hearing, hypertension, and irregular heartbeat.

The factors which influence the society and construction are identified. Such main sources of construction worksite noises are:

1. Diesel power generators

2. Cutting and welding processes

3. Heavy machinery like trucks

4. Transport of materials

5. Demolition

6. Maintenance and Repair

7. Erection.

The noise levels created by construction equipment will vary greatly depending on factors such as,

1. The type of equipment

2. The specific model

3. The operation being performed and

4. The condition of the equipment.

Noise effects on human beings in construction site are classified into two types such as

 

Noise hazards

i. Permanent hearing loss

ii. Neural stress

Noise nuisance

i) Efficiency

ii) Mental stress

iii) Irritability

iv) Sleep interference

v) Habit of talking loudly

vi) Hearing loss

vii) Concentration

Related questions

Description : Explain the procedure of the storage, transportation and erection of prefabricated building elements. 

Last Answer : Storage of pre-fabricated building elements: 1) Procurement storage of Unloading raw materials 2) Testing of raw materials 3) Design of concrete mix 4) Fabrication of reinforcement cages 5) ... differs with risk condition, hence skilled foremen, and workers to be employed on the job.

Description : List the various types of losses of prestress in pretensioned pre-stressed member.

Last Answer : i. Elastic shortening ii. Shrinkage of concrete iii. Creep of concrete iv. Relaxation of steel

Description : Explain freyssinet system of prestressing with respect to process and application with sketches.

Last Answer : Process: - 1. The freyssinet system was the first to be introduced among the post - tensioned system high tensile steel wires 5mm to 8mm diameter about 12 in number are arranged to form a group into a cable ... gas (LNG) storage tank 4. Off share platforms. 5. Wind turbine towers etc.

Description : For what type of structures do you recommend post-tensioning?

Last Answer : 1) High rise buildings. In long span slab where beam is not provided & the slab of assembly hall, cinema theaters etc. like structure where the distance between columns are more, then post ... Post Tensioning is used extensively for slabs on grade where soils are likely to move (expansive soils)

Description : Illustrate cable profiles for eccentric straight and parabolic cables with sketches. 

Last Answer : i) Eccentric straight cable profile: The stress due to prestressing alone are generally combined stresses due to the action of direct load bending from an eccentrically applied load. In this case, the load is ... section as shown in the figure below. ii) Parabolic cable profile

Description : Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Last Answer : Loss due to Friction: This loss occurs only in post-tensioned members. There always exists a certain amount of friction in the jacking and anchoring system and on the walls of the duct. So, ... over-extending the tendon in the prestressing operation by the amount of the draw - in before anchoring

Description : State the advantages and disadvantages of prestressed concrete.

Last Answer : Advantages: 1. The c/s ismore efficiently used in fully prestressed members. 2. Dead loads are reduced considerably. 3. Improved shear resistance, due to the effect of compressive prestress, ... cube strength of 35 N/mm2 for Posttensioned system and 45 N/ mm2 for pretensioned system.

Description : Justify the necessity of use of high-grade materials in prestressed concrete.

Last Answer : 1) If mild steel is used, the working stress in it (i.e. 140 N/mm2) is more or less completely lost due to elastic deformation, creep and shrinkage of concrete. 2) The ... structural elements. With reduced dead weight of the material, larger spans become technically and economical practicable. 

Description : Explain any one method of Prefab system.

Last Answer : Prefab system: It refers to any part of a building that has been fabricated at a place other than its final location. For this reason, it can be referred to by other names such as off-site fabrication, ... If you need further assessing, feel free to contact us; your needs are all that matter to us.

Description : Explain determination of Water absorption of paver block and state acceptable limits as per IS. 

Last Answer : Step 1. Saturation  The test specimen shall be completely immersed in water at room temperature for 24 * 2 h. The specimen then shall be removed from the water and allowed to drain for 1 min by ... more than 6 % by mass and in individual samples, the water absorption should be restricted to 7 %

Description : Describe with sketch any two joints in doors and window frame.

Last Answer : 1. Connections must be adequate structurally. 2. Means of connections between adjacent must allow safe and speedy erection regardless of minor inherent inaccuracies in precast elements and in-situ concrete. 3. ... height) of the frames shall confirm to the requirements of IS : 4021-1976

Description : Describe any two design considerations for Precast Canal lining.

Last Answer : 1. Precast concrete slabs, laid properly on carefully prepared sub-grades and with the joints, effectively sealed, constitute a serviceable type of lining. The precast slabs are about 5 to ... . However, seepage losses are obviously more. Transportation of precast slabs may contribute to breakage. 

Description : State any four advantages and four disadvantages of precast concrete.

Last Answer : Advantages: 1. Very rapid speed of erection 2. Good quality control 3. Entire building can be precast-walls, floors, beams, etc. 4. Rapid construction on site 5. High quality because of ... is required in the application of the panel on site. 11. Cranes are required to lift panels.

Description : State cable profile in simply supported rectangular beam section.

Last Answer : Cabe profile: In a prestressed concrete member, external type of loads is balanced by transverse component of suitable cable profile, on effect of loading the net deformation increases the stress, strain and length of the tendon, extension of tendon, increase in strain, increase in stress.

Description : What is the basic principle of Prestressed concrete?

Last Answer : Principle: The compressive stresses induced by high strength steel tendons in a concrete member before the application of load, will balance the tensile stresses imposed in the member during its service.

Description : Define Prestressed concrete and state types of prestressing steel.

Last Answer : Prestressed concrete: Prestressed concrete is basically a concrete in which internal stresses of a suitable magnitude and distribution are deliberately introduced so that the stresses resulting from external loads are ... 1962, and. 4) Uncoated stress relieved strand conforming to IS: 6006-1970. 

Description : Define Modules and modular co-ordination

Last Answer : Modules: Modules are a standard unit of size used to coordinate the dimensions of buildings and components. They are of two types: 1. Multi modules 2. Basic modules  Modular Co-ordination: The modular ... for basic module is M 1M = 100mm 100 mm = 1M = It is international standard value.

Description : State any four precast non-structural components that can be used for speedy construction.

Last Answer : 1. Architectural Precast 2. Insulated Architectural Cladding 3. Insulated Wall Panels 4. Column Covers 5. Precast Concrete Light Wall 6. Precast Concrete Spandrels 7. Precast Concrete Solid Walls 8. Stormwater Deflector 9. Façade 10. Concrete panels for partition walls 11. Concrete planks

Description : State any two names of materials used in precast concrete

Last Answer : 1. Cement 2. Sand 3. Steel 4. Water 5. Polystyrene 6. Fly ash. 7. Ground granulated blast furnace slag

Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Last Answer : (a) Derrick Crane

Description : What are the Positive effect of noise pollution?

Last Answer : Need answer

Description : If you were a senator or congressman/woman and had spent the last 7 years staking your reputation on destroying Obamacare, how would you feel today?

Last Answer : I would be really sick, health-wise, and feel as if my health insurance just crapped out.

Description : What should I watch out for after staking a student loan through the heart?

Last Answer : They will probably try to milk you of every penny of the future interest they lost. Be sure to consult a lawyer if that happens.

Description : What would be the best strategy for staking out a parking spot?

Last Answer : I try to get the attention of someone walking to their car, then let them know I want to follow them to their spot. Usually, once I get buy-in from the person whose car is currently occupying ... in a really crowded parking lot because all the people using the circling method beat me to the spots.

Description : what type of staking is best for cucumbers, tomatoes, and japeleno grown in containers on my balcony

Last Answer : For cucumbers, you can put strings in the dirt in the pot and tie them up 6 to 8 ft from the pot to a nail or hook somewhere up.......they will grow up on on it..............For the tomatoes use a cage ... - peppers6.0-6.5....sweet peppers 5.0-6.0....potatoes sweet need 5.0-6.0 other need 4.8-6.5

Description : The purpose of staking is to a. Protect the trunk b. Prevent root damage due to wind action c. Prevent wind injury to branches d. Prevent damage due to fros

Last Answer : Prevent wind injury to branches

Description : Staking of vines in rainy season is done to avoid: a. Insect attack b. Disease attack c. Sunscald d. None of these

Last Answer : Disease attack

Description : Mention two detrimental effects of tourism on the surrounding environment. -Geography

Last Answer : The unplanned and unchecked growth of tourist centers deprive them of their original charm and beauty and prove detrimental for places like Shimla, Darjeeling and Mussoorie. Even drinking water is not ... unplanned growth tarnishes the image of the concerned spot, e.g. Taj Mahal, Meenakshi Temple.

Description : How does the temperature in the environment affects the amount of water available in the surrounding?

Last Answer : Need answer

Description : Anything that is outside the system boundary is called ________.  a. Surrounding  b. Natural Environment  c. Closed System  d. Open System

Last Answer : Surrounding

Description : A state occurs when a system is in equilibrium  a. Natural Environment  b. Closed System  c. Surrounding  d. Isentropic

Last Answer : Natural Environment

Description : The school or college building needs a calm surrounding to avoid Options: A) environmental stress B) competing stimulus C) subjective stress D) none of these

Last Answer : B) competing stimulus

Description : How many iPad models were fabricated?

Last Answer : There have only been two generations of the iPad so far. The first and second generations of the iPad have been highly successful, and the third generation is rumored to be out soon.

Description : An integrated circuit is A) A complicated circuit B) An integrating device C) Much costlier than a single transistor D) Fabricated on a tiny silicon chip

Last Answer : Answer : D

Description : What are the destinations of the organic material fabricated by the producers ?

Last Answer : Part of the organic material synthesized by the producers is consumed as energy source for the metabolism of the own producer individual. Other part is incorporated (into the body) and become available ... and only a fraction is incorporated and become available as food for the following level.

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Last Answer : (D) Light and resists attack by acids

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Description : They were fabricated using a low power version of the HMOS technology called____: a. HSMOS b. HCMOS c. HSSOM d. None of these

Last Answer : b. HCMOS

Description : Microprocessor is fabricated on single chip using: a. MOS b. ALU c. CPU d. All of these

Last Answer : a. MOS

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : Which technology using the microprocessor is fabricated on a single chip: a. POS b. MOS c. ALU d. ABM

Last Answer : b. MOS

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : d. Fabricated on a tiny silicon chip

Description : A helical spring is fabricated by wrapping wire 19.05 mm in diameter around a forming cylinder 203.2 mm in diameter. Compute the number of turns required to permit an elongation of 101.6 mm. without exceeding a shearing ... G = 82737 N/mm2. a. 10 turns b. 20 turns c. 25 turns d. 30 turns

Last Answer : a. 10 turns

Description : The busiest rail section in respect to goods transportation is- (1) Delhi - Kolkata section (2) Kolkata - Chennai section (3) Delhi - Mumbai section (4) Mumbai - Chennai section

Last Answer : (1) Delhi - Kolkata section Explanation: The busiest rail section in respect to goods transportation is Delhi-Kolkata section.

Description : With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in ... starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Last Answer : Every loop has an odd no. of cells and at least 5.

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

Description : Why do dramatizations of artificial intelligence nearly always depict it as violently over-throwing humanity?

Last Answer : General fear of technology and the unknown. The automation during the industrial revolution had the same effect.