how to make salt water for hatching brine shrimp

how to make salt water for hatching brine shrimp
by

1 Answer

Answer :

Need Answer
by

Related questions

How long can brine shrimp eggs last? (aka sea monkeys)

Description : How long can brine shrimp eggs last? (aka sea monkeys)

Last Answer : I scrolled down on the video that prompted this and apparently I commented that they can live up to 25 years, but I would like a source that confirms that aside from whatever past me found lol

Brine refers to : (1) Salt water (2) Sweet water (3) Pure water (4) Starch water

Description : Brine refers to : (1) Salt water (2) Sweet water (3) Pure water (4) Starch water

Last Answer : (1) Salt water Explanation: Brine is a solution of salt in water. In different contexts, brine may refer to salt solutions ranging from about 3.5% up to about 26%. Other levels of concentration are called in different names.

Brine refers to : (1) Salt water (2) Sweet water (3) Pure water (4) Starch water

Description : Brine refers to : (1) Salt water (2) Sweet water (3) Pure water (4) Starch water

Last Answer : Salt water

What is the solvent in a salt solution like brine?

Description : What is the solvent in a salt solution like brine?

Last Answer : Water.

What is the solute in a salt solution like brine?

Description : What is the solute in a salt solution like brine?

Last Answer : water or solvent water

What is the solute in a salt solution like brine?

Description : What is the solute in a salt solution like brine?

Last Answer : water or solvent water

Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Description : Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Last Answer : B. Heat, salt, dipping in brine/ minimal moisture content

Common salt is generally not produced commonly by __________ method from brine. (A) Freeze drying (B) Electrolytic (C) Solar evaporation (D) Vacuum evaporation

Description : Common salt is generally not produced commonly by __________ method from brine. (A) Freeze drying (B) Electrolytic (C) Solar evaporation (D) Vacuum evaporation

Last Answer : (A) Freeze drying

Good quality of edible salt is obtained from brine by the process of (A) Solar evaporation (B) Vacuum evaporation (C) Freeze drying (D) Electrolysis

Description : Good quality of edible salt is obtained from brine by the process of (A) Solar evaporation (B) Vacuum evaporation (C) Freeze drying (D) Electrolysis

Last Answer : (B) Vacuum evaporation

What inferences can make you make to explain beterlis motivation for trying to ruin keevans chances on hatching day?

Description : What inferences can make you make to explain beterlis motivation for trying to ruin keevans chances on hatching day?

Last Answer : Feel Free to Answer

Number of moulting in cockroach after hatching and development of complete animal are :

Description : Number of moulting in cockroach after hatching and development of complete animal are :

Last Answer : Number of moulting in cockroach after hatching and development of complete animal are : A. Less then 7 B. Upto 8 C. Upto 9 D. more then 10

After hatching by the hen, the young chicks come out of eggs within (a) One week (b) Two weeks (c) Three weeks (d) Four weeks

Description : After hatching by the hen, the young chicks come out of eggs within (a) One week (b) Two weeks (c) Three weeks (d) Four weeks

Last Answer : Ans:(c)

Avian encephalomyelitis infection in young chicks can be prevented by B A. vaccinating the chicks for AE at hatchery B. Vaccinating the breeding flocks C. Avoid hatching from the infected breeding flcoks D. None of these

Description : Avian encephalomyelitis infection in young chicks can be prevented by B A. vaccinating the chicks for AE at hatchery B. Vaccinating the breeding flocks C. Avoid hatching from the infected breeding flcoks D. None of these

Last Answer : Vaccinating the breeding flocks

Ovipositor is used for A A. Protecting eggs B. Releasing eggs C. Hatching eggs D. Copulation

Description : Ovipositor is used for A A. Protecting eggs B. Releasing eggs C. Hatching eggs D. Copulation

Last Answer : Protecting eggs

The fertilized eggs of Catla take about _ to _ hrs for hatching at 30°C (a) 10 to 12 (b) 12 to 14 (c) 14 to 18 (d) 18 to 24

Description : The fertilized eggs of Catla take about _ to _ hrs for hatching at 30°C (a) 10 to 12 (b) 12 to 14 (c) 14 to 18 (d) 18 to 24

Last Answer : (d) 18 to 24

Act of parturition in cattle is called as — a. Kidding b. Hatching c. Furrowing d. Calving

Description : Act of parturition in cattle is called as — a. Kidding b. Hatching c. Furrowing d. Calving

Last Answer : d. Calving

If you have to go through a tedious process pickling to make sure there's no botulism, how can you reuse brine?

Description : If you have to go through a tedious process pickling to make sure there's no botulism, how can you reuse brine?

Last Answer : If I remember correctly, the acidity and salt of brining solutions is what kills harmful bacteria. That’s still intact after pickling.

How do you make a portal to hero-brine?

Description : How do you make a portal to hero-brine?

Last Answer : It depends entirely on which Herobrine mod you are using, youwould have to look at the documentation that accompanies thatspecific mod.

Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Description : Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Last Answer : (B) Oxidation of Cl - ions

Pick out the correct statement. (A) Dialysis process is used for the production of fresh water from brine (B) Electrodialysis is used in the manufacture of NaOH (C) Electrodialysis is used for the refining/purification of petrol (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Dialysis process is used for the production of fresh water from brine (B) Electrodialysis is used in the manufacture of NaOH (C) Electrodialysis is used for the refining/purification of petrol (D) Both (B) and (C)

Last Answer : (B) Electrodialysis is used in the manufacture of NaOH

Vegetables are canned in a) brine solution b) sugar solution c) distilled water d) all of these

Description : Vegetables are canned in a) brine solution b) sugar solution c) distilled water d) all of these

Last Answer : a) brine solution

Zeolite used in water softening process (cation exchange) is regenerated by washing with (A) Brine (B) Chloramines (C) Sodium bisulphite (D) Liquid chlorines

Description : Zeolite used in water softening process (cation exchange) is regenerated by washing with (A) Brine (B) Chloramines (C) Sodium bisulphite (D) Liquid chlorines

Last Answer : (A) Brine

In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Description : In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Last Answer : (A) Water

Which of the following has the highest value of refractive index? (A) Brine (sea water) (B) Diamond (C) Distilled water (D) Glass

Description : Which of the following has the highest value of refractive index? (A) Brine (sea water) (B) Diamond (C) Distilled water (D) Glass

Last Answer : (B) Diamond

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

The caper: useless little ball of brine or tiny charming flavor bomb?

Description : The caper: useless little ball of brine or tiny charming flavor bomb?

Last Answer : Boy, do I have a head cold! It took me a while to figure out what kind of caper you were on! I had one recipe for a cold roast beef that had a caper mustard sauce; I thought the capers added some color and flavor. Still probably have some in a jar from 20 years ago.

How long should carp roasts be loaded in brine?

Description : I used to make roasters (also from carp), but I don't remember how long it took them to eat. A few days ago, I prepared and loaded the roasts again, but according to a different recipe and it did not state the loading time. Does anyone know when they will be "mature"?

Last Answer : At least until the next day - to make the meat taste marinated. But in such a short time they won't have time to "soften" the bones, marinating is necessary for at least 3 days (it also depends on how sour your marinade is).

A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Description : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Last Answer : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` ... x & y are the molar mass of P and Q.

Electrolysis of aqueous solution of Brine (NaCI) gives

Description : Electrolysis of aqueous solution of Brine (NaCI) gives

Last Answer : Electrolysis of aqueous solution of Brine (NaCI) gives A. (A)`Cl_2` B. (B) `H_2` C. (C) NaHO D. (D) all of these

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq.)rarr(1)/(2)Cl_(2) ... )H_(2)(g),E_("cell")^(o.)=0.00V`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq)to(1)/(2)Cl_(2 ... 2)H_(2)(g), E_(Cell)^(otimes)=0.00V`

What is the Biography of poet Mary Dow brine?

Description : What is the Biography of poet Mary Dow brine?

Last Answer : Need answer

Is a brine fly a producer or consumer?

Description : Is a brine fly a producer or consumer?

Last Answer : Feel Free to Answer

If someone gave you some brine, what would they be giving you?

Description : If someone gave you some brine, what would they be giving you?

Last Answer : o

In milk chilling plant, the usual secondary refrigerant is (a)ammonia (b)sodium silicate (c) glycol (d) brine

Description : In milk chilling plant, the usual secondary refrigerant is (a)ammonia (b)sodium silicate (c) glycol (d) brine

Last Answer : Ans: d

A certain refrigerating system has a normal operating suction pressure of 10 kg/cm gauge and condensing pressure ofabout 67 kg/cm. The refrigerant used is (a) Ammonia (b) Carbon dioxide (c) Freon (d) Brine

Description : A certain refrigerating system has a normal operating suction pressure of 10 kg/cm gauge and condensing pressure ofabout 67 kg/cm. The refrigerant used is (a) Ammonia (b) Carbon dioxide (c) Freon (d) Brine

Last Answer : Ans: b

Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine

Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine

Last Answer : (B) Nitric acid (10%)

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Rubber lined pumps can be used to pump (A) Caustic soda (B) Chlorinated brine (C) Hypochlorous acid (D) All (A), (B) and (C)

Description : Rubber lined pumps can be used to pump (A) Caustic soda (B) Chlorinated brine (C) Hypochlorous acid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Concrete tank can be used to store (A) Alum(B) Ferrous sulphate(C) Sulphuric acid(D) Saturated brine

Description : Concrete tank can be used to store (A) Alum (B) Ferrous sulphate (C) Sulphuric acid (D) Saturated brine

Last Answer : (D) Saturated brine

Brine (15% concentration) can be stored in a vessel made of (A) Monel (B) Karbate (C) Cast iron (D) None of these

Description : Brine (15% concentration) can be stored in a vessel made of (A) Monel (B) Karbate (C) Cast iron (D) None of these

Last Answer : (A) Monel

Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Description : Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Last Answer : (B) Alkaline solutions

Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Description : Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Last Answer : (D) Nickel

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Brine is an a) aqueous solution of sodium hydroxide b) aqueous solution of sodium carbonate c) aqueous solution of sodium chloride d) aqueous solution of sodium bicarbonate

Description : Brine is an a) aqueous solution of sodium hydroxide b) aqueous solution of sodium carbonate c) aqueous solution of sodium chloride d) aqueous solution of sodium bicarbonate

Last Answer : c) aqueous solution of sodium chloride

The common pollutant generated in chlor-alkali industry and battery manufacture is (A) Mercury (B) Brine (C) Phosphate (D) None of these

Description : The common pollutant generated in chlor-alkali industry and battery manufacture is (A) Mercury (B) Brine (C) Phosphate (D) None of these

Last Answer : (A) Mercury

Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Description : Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Last Answer : (C) H2

Impurities present in brine is normally removed by treatment with(A) NH3 and CO2(B) Lime and soda ash(C) Lime, ammonia and carbon(D) All (A), (B) and (C)

Description : Impurities present in brine is normally removed by treatment with (A) NH3 and CO2 (B) Lime and soda ash (C) Lime, ammonia and carbon (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

__________ is obtained as a by-product in the manufacture of sodium hydroxide using brine. (A) Chlorine (B) Ammonium chloride (C) Sodium carbonate (D) Sodium bi-carbonate

Description : __________ is obtained as a by-product in the manufacture of sodium hydroxide using brine. (A) Chlorine (B) Ammonium chloride (C) Sodium carbonate (D) Sodium bi-carbonate

Last Answer : (A) Chlorine