The frequency can be measured by using:

by

3 Answers

Answer :

The frequency can be measured by using: Schering’s bridge.

by

Answer :

Capacitance 
by

Answer :

Weins bridge 
by

Related questions

The self inductance of a coil can be measured using

Description : The self inductance of a coil can be measured using (A) Wien’s Bridge (B) Schering Bridge (C) Anderson’s Bridge (D) Wheatstone Bridge

Last Answer : The self inductance of a coil can be measured using Anderson’s Bridge

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But

Description : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 ... resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

Last Answer : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, ... resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is 100

The EMF of Weston standard cell is measured using

Last Answer : The EMF of Weston standard cell is measured using Potentiometer.

The power of a n-phase circuit can be measured by using a minimum of

Last Answer : The power of a n-phase circuit can be measured by using a minimum of (n - 1) wattmeter elements

In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Description : In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Last Answer : In a standard multimeter for measuring AC voltage, parameter of RMS voltage is measured

The power delivered to a 3-phase load can be measured by the use of two wattmeters only

Description : The power delivered to a 3-phase load can be measured by the use of two wattmeters only when the  (a) load is unbalanced (b) load is balanced (c) three phase load is connected to the source through three wires (d) three phase load is connected to the source through four wires

Last Answer : The power delivered to a 3-phase load can be measured by the use of two wattmeters only when the three phase load is connected to the source through three wires 

True value has been 50 whereas measured value is 40 then the percentage error in the reading

Description : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be ______.  (A) 20% (B) 40% (C) 50% (D) 30%

Last Answer : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be 20%. 

Dielectric loss in a capacitor is best measured by

Description : Dielectric loss in a capacitor is best measured by (A) Wien Bridge (B) Schering Bridge (C) Anderson Bridge (D) Heaviside-Campbell Equal Ratio Bridge

Last Answer : Dielectric loss in a capacitor is best measured by Schering Bridge

Low resistance is measured by

Last Answer : Low resistance is measured by Kelvin’s double bridge.

The dielectric loss of capacitance can be measured by

Last Answer : The dielectric loss of capacitance can be measured by Schering bridge.

The resistance can be measured most accurately by

Last Answer : The resistance can be measured most accurately by bridge method.

The induction of a high Q inductor can be measured by a

Last Answer : The induction of a high Q inductor can be measured by a Hay Bridge.

Alternating current is measured by?

Last Answer : Alternating current is measured by induction ammeter.

E.m.f. of a Weston cell is accurately measured by?

Last Answer : E.m.f. of a Weston cell is accurately measured by electrostatic voltmeter.

In an Anderson bridge, the unknown inductance is measured in terms of?

Last Answer : In an Anderson bridge, the unknown inductance is measured in terms of known capacitance and resistance.

A direct current can be measured by?

Last Answer : A direct current can be measured by a D.C. potentiometer in conjunction with a standard resistance.

A voltage of about 200 V can be measured?

Description :

Last Answer : A voltage of about 200 V can be measured a D.C. potentiometer in conjunction with a volt ratio box.

Resistances can be measured with the help of?

Last Answer : Resistances can be measured with the help of ohmmeters and resistance bridges.

Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) :

Description : Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) : by using either capacitor (or) resistor in one of the arms of the bridge, the frequency of a wein bridge oscillator ... C) (A) is true but (R) is false (D) (A) is false but (R) is true

Last Answer : Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) : by using either capacitor (or) resistor in one of the arms of the bridge, the frequency of a wein bridge oscillator ... ) (A) is true but (R) is false (D) (A) is false but (R) is true

Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of

Description : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is   (A)sinusoidal (B) square (C) rectangular (D) triangular

Last Answer : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is sinusoidal 

For measurement of radio frequency ac signals __________ type meter is used

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase

Description : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be

Last Answer : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be 90o

A moving iron ammeter may be compensated for frequency errors by

Last Answer : A moving iron ammeter may be compensated for frequency errors by shunt capacitance.

The electrostatic instruments can be used without serious loss of accuracy upto ......... frequency

Last Answer : The electrostatic instruments can be used without serious loss of accuracy upto 100kHz frequency.

An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is

Last Answer : An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is 2MHz.

To measure radio frequency, the suitable frequency meter is

Last Answer : To measure radio frequency, the suitable frequency meter is heterodoxy frequency meter.

The most commonly used null deflector in a power frequency ac bridge is a:

Last Answer : The most commonly used null deflector in a power frequency ac bridge is a: Vibration galvanometer.

A Weston frequency meter is?

Last Answer : A Weston frequency meter is moving iron instrument.

In a Weston frequency meter, the magnetic axes of the two fixed coils are?

Last Answer : In a Weston frequency meter, the magnetic axes of the two fixed coils are perpendicular.

In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of?

Last Answer : In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of 0.5 Hz.

For measuring current at high frequency we should use?

Last Answer : For measuring current at high frequency we should use thermocouple instrument.

The pitch of sound is measured by its (a) Intensity (b) Waveform (c) Frequency (d) Loudness

Description : The pitch of sound is measured by its (a) Intensity (b) Waveform (c) Frequency (d) Loudness

Last Answer : Ans:(c)

The pitch of the sound is measured by its: (1) Intensity (2) waveform (3) Frequency (4) Loudness

Description : The pitch of the sound is measured by its: (1) Intensity (2) waveform (3) Frequency (4) Loudness

Last Answer : (3) Frequency Explanation: Pitch relates to the frequency, or how many times a second the particles vibrate. The distance between one wave and the next gives the wavelength. For sounds all travelling at the same speed, highfrequency (high-pitched) sounds have waves very close together.

If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Description : If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Last Answer : Answer: D

If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Description : If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Last Answer : Answer: C

Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Description : Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.

Last Answer : B. Impulse noise voltage is dependent on bandwidth

In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Last Answer : B. 120 Hz

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the same bandwidth. A. Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Description : The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the ... . Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Last Answer : D. Residual noise level

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

What happens when a frequency meter is adjusted to the frequency of the signal being measured?

Description : What happens when a frequency meter is adjusted to the frequency of the signal being measured?

Last Answer : Power is absorbed by the frequency meter cavity; and a pronounced dip in power, at the output, will be observed.

In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Description : In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Last Answer : Swr on the transmission line.

The frequency of rotation in some rotating machinery can be measured by a

Description : The frequency of rotation in some rotating machinery can be measured by a

Last Answer : stroboscope

Tank-circuit frequency can be measured by

Description : Tank-circuit frequency can be measured by

Last Answer : grid dip meter

When the frequency of the rotor of an induction motor is small, it can be measured by_________.

Last Answer : When the frequency of the rotor of an induction motor is small, it can be measured by d.c. moving coil milli-voltmeter

The measurement range of an ammeter can be increased by using a:

Description : The measurement range of an ammeter can be increased by using a:

Last Answer : The measurement range of an ammeter can be increased by using a: low resistance in shunt

An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to

Description : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to  (1) 1.414 times dc sensitivity (2) dc sensitivity (3) 0.9 times dc sensitivity (4) 0.707 times dc sensitivity

Last Answer : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to 0.9 times dc sensitivity

Two non -inverting amplifiers, one having a unity gain and the other having again of twenty are made using

Description : Two non -inverting amplifiers, one having a unity gain and the other having again of twenty are made using identical operational amplifiers. As compared to the unity gain amplifier, the amplifier with gain twenty has

Last Answer : Two non -inverting amplifiers, one having a unity gain and the other having again of twenty are made using identical operational amplifiers. As compared to the unity gain amplifier, the amplifier with gain twenty has less bandwidth

When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially

Description : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance

Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current