An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is

by

1 Answer

Answer :

An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is 2MHz.

by

Related questions

A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is 2.44mV.

A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is 4096μs.

The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is

Last Answer : The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is 12μs.

Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency

Description : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency is (a) 2.65 MHz (b) 6.25 MHz (c) 5.26 MHz (d) 6.52 MHz 

Last Answer : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 ns. The maximum clock frequency is 6.25MHz. nff  * Tdelay = 4*40 =160ns so, max. frequency = 1/ (200*10-9 ) = 6.25MHz          

Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What is the maximum data transfer rate for this microprocessor? (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec

Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec 

Last Answer : (B) 4x106 bytes/sec

For a certain 4 bit successive approximation A/D converter, the maximum ...

Last Answer : For a certain 4 bit successive approximation A/D converter, the maximum ladder output is +8V. if a constant +6V is applied to the analog input the sequence of binary states for the SA register is 0110.

The resolution of a 12 bit D/A converter using a binary ladder is

Last Answer : The resolution of a 12 bit D/A converter using a binary ladder is 0.02%.

In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB

Description : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Last Answer : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

The percent resolution of an 8 -bit D/A converter is

Description : The percent resolution of an 8 -bit D/A converter is

Last Answer : The percent resolution of an 8 -bit D/A converter is 0.392

The number of comparators required in a 3-bit comparator type analog to digital converter is

Description : The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8 

Last Answer : Number of comparators =2^n -1= 2^3 -1=7

A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the...

Description : A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the input code 1010:  (1) 0.3125 V (2) 3.125 V (3) 0.78125 V (4) –3.125 V

Last Answer : 3.125V

A spring-mass system has a natural frequency of 10 rad/sec. When the spring constant is reduced by 800 N/m, the frequency is altered by 45 percent. Find the mass and spring constant of the original system. a)11.47kg and 1147.95N/m b)8.95kg and 895.25N/m c) 7.265kg and 726.5N/m d)None

Description : A spring-mass system has a natural frequency of 10 rad/sec. When the spring constant is reduced by 800 N/m, the frequency is altered by 45 percent. Find the mass and spring constant of the original system. a)11.47kg and 1147.95N/m b)8.95kg and 895.25N/m c) 7.265kg and 726.5N/m d)None

Last Answer : a)11.47kg and 1147.95N/m

If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Description : If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Last Answer : Answer: D

If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Description : If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Last Answer : Answer: C

How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Description : How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Last Answer : 1. 300 2. 240 3. 250 4. 275 Ans- 2400/(7+1+2) 240

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

A 10 bit resistive divider is constructed such that the current through...

Description : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 

Last Answer : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 51.2mA.

Julie is going on an extended trip for three weeks. She lives in a remote area where there are frequent electrical power outages which can last up to three or four days. Julie has quite a bit of food in her freezer which would go bad if it thawed and then re-froze. She does have digital clock and a VCR which would flash 12:00 if the power went out. Unfortunately the clock and VCR flash even if the power only goes out for a few seconds. What can Julie do so that when she returns home she will be able to determine whether the power was out long enough to thaw her food? Asking a neighbor whether the power was out, isn't a reliable option because the nearest house is half a mile away, and one house may have power, while another house may have no power. She won?t be able to have a neighbor chec

Description : Julie is going on an extended trip for three weeks. She lives in a remote area where there are frequent electrical power outages which can last up to three or four days. Julie has quite a bit of food ... power, while another house may have no power. She won?t be able to have a neighbor chec -Riddles

Last Answer : One thing Julie could do is freeze a tray of ice-cubes, and turn the tray of ice upside down in her freezer. When she comes home, she should check the tray. If the ice cubes are still in the ... clean out the freezer. She will have to make a judgment call if the ice-cubes are only slightly thawed.

What synchronization is provided so that the start and end of message is identified? A. Carrier B. Character C. Bit D. Clock

Description : What synchronization is provided so that the start and end of message is identified? A. Carrier B. Character C. Bit D. Clock

Last Answer : B. Character

Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Description : Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Last Answer : D. character oriented

How many clock pulses are required to output a 4-bit number in serial form?

Description : How many clock pulses are required to output a 4-bit number in serial form?

Last Answer : Four.

For measurement of radio frequency ac signals __________ type meter is used

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

What is static frequency converter?

Description : What is static frequency converter?

Last Answer : Static Frequency converter is a static device with powerelectronic component such as scrs etc

How do I calibrate a frequency converter?

Description : How do I calibrate a frequency converter?

Last Answer : There are several frequency calibration converter and repair stores. The steps are complicated and you can find several sites that offer step by step directions.

What exactly does a frequency converter convert?

Description : What exactly does a frequency converter convert?

Last Answer : A frequency converter converts an alternating current from one frequency to another. This is typically measured in Hertz (Hz).

In which industries would you use a frequency converter?

Description : In which industries would you use a frequency converter?

Last Answer : Electronic and mechanical industries use frequency converters. These converters are also often used in aircraft and aviation industries.

What is the output frequency of an upper-sideband parametric-frequency converter?

Description : What is the output frequency of an upper-sideband parametric-frequency converter?

Last Answer : The sum of the input frequency and the pump frequency.

What are the advantages of the use of frequency converter instead of star-delta or soft starter?

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Last Answer : c. 1 rps

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Last Answer : A 25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

In above numerical what will be the frequency corresponding to the peak amplitude A 14.18rad/sec B 24.13rad/sec C 20.22rad/sec D 22.32rad/sec

Description : In above numerical what will be the frequency corresponding to the peak amplitude A 14.18rad/sec B 24.13rad/sec C 20.22rad/sec D 22.32rad/sec

Last Answer : A 14.18rad/sec

A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Description : A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Last Answer : B 30 rad/sec

A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Description : A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Last Answer : D 4 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Last Answer : D 60 rad/sec

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec A. 100.5 x 10 3 N-s/m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Last Answer : C. 42 x 10 3 N-s/m

Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Last Answer : ( A )25.62 rad/sec

In spring mass experiment, the natural frequency of 10 kg mass was found to be 12 rad/sec. the stiffness of the spring is A. 800 N/m B. 1200 N/m C. 1440 N/m D. 2000 N/m

Description : In spring mass experiment, the natural frequency of 10 kg mass was found to be 12 rad/sec. the stiffness of the spring is A. 800 N/m B. 1200 N/m C. 1440 N/m D. 2000 N/m

Last Answer : C. 1440 N/m

The unit of natural frequency is A. Rad/sec B. Hz C. Both D. No unit

Description : The unit of natural frequency is A. Rad/sec B. Hz C. Both D. No unit

Last Answer : C. Both

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Last Answer : a. 25.62 rad/sec

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec a. 100.5 x 10 3 N-s/m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Last Answer : c. 42 x 10 3 N-s/m

find the value of logarithmic decrement of a vibratory system if its natural frequency is 10rad/sec, its mass is 10kg and its damping constant is 100N.s/m a) 36.27 b)362.7 c)0.3627 d)3.627

Description : find the value of logarithmic decrement of a vibratory system if its natural frequency is 10rad/sec, its mass is 10kg and its damping constant is 100N.s/m a) 36.27 b)362.7 c)0.3627 d)3.627

Last Answer : d)3.627

A car weighing 1000kg deflects its springs by 0.4cm under its load. Determine the natural frequency of 2 car in vertical direction take g=10N/m a) 25 rad/sec b)50 rad/sec c) 2 rad/sec d)none

Description : A car weighing 1000kg deflects its springs by 0.4cm under its load. Determine the natural frequency of 2 car in vertical direction take g=10N/m a) 25 rad/sec b)50 rad/sec c) 2 rad/sec d)none

Last Answer : b)50 rad/sec

The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Description : The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Last Answer : b) 262.5

The group delay of a wave with phase constant 2.5 units and frequency of 1.2 radian/sec is a) 3.7 b) 1.3 c) 3 d) 2.08

Description : The group delay of a wave with phase constant 2.5 units and frequency of 1.2 radian/sec is a) 3.7 b) 1.3 c) 3 d) 2.08

Last Answer : d) 2.08

The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Description : The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Last Answer : a) 6

has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above

Description : has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above

Last Answer : Ans- a. Reciprocating power harrow