The resistance can be measured most accurately by

by

1 Answer

Answer :

The resistance can be measured most accurately by bridge method.

by

Related questions

E.m.f. of a Weston cell is accurately measured by?

Last Answer : E.m.f. of a Weston cell is accurately measured by electrostatic voltmeter.

Low resistance is measured by

Last Answer : Low resistance is measured by Kelvin’s double bridge.

In which part of the scale does the pointer indicate more accurately

Last Answer :  In about middle of the scale

What would it be like in a world where a person’s emotional and social worth could be accurately measured?

Description : What would it be like in a world where a person’s emotional and social worth could be accurately measured?

Last Answer : It’d be the easiest way to riches. Possibly a more prosperous society, too. Good question. Sucks the world doesn’t operate like that.

How much can be measured accurately using meter scale ?

Description : How much can be measured accurately using meter scale ?

Last Answer : Measurements up to millimeters can be accurately measured using the meter scale.

The instrument by which the rate of growth of stem is accurately measured is Or Growith in langth of a plant can be measured by

Description : The instrument by which the rate of growth of stem is accurately measured is Or Growith in langth of a plant can be measured by

Last Answer : The instrument by which the rate of growth of stem is accurately measured is Or Growith in ... Auxanometer B. Potometer C. Photometer D. Hygrometer

The diameter of the paper pin is measured accurately by using ________.

Description : The diameter of the paper pin is measured accurately by using ________.

Last Answer : The diameter of the paper pin is measured accurately by using ________. (A) Vernier callipers (B) ... (C) metre scale (D) a measuring tape

Very small time intervals are accurately measured by the------? A. Pabsars B. White dwarfs C. Atomic Clocks (Answer) D. None of these

Description : Very small time intervals are accurately measured by the------? A. Pabsars B. White dwarfs C. Atomic Clocks (Answer) D. None of these

Last Answer : C. Atomic Clocks (Answer)

Which of the following is not a characteristic of a marketing objective? A)Consistent with both business -unit and corporate strategy B)Expressed in clear, simple terms C)Written so that it can be measured accurately D)Specifies a time frame for its accomplishment E)Detailed enough for marketing strategy implementation

Description : Which of the following is not a characteristic of a marketing objective? A)Consistent with both business -unit and corporate strategy B)Expressed in clear, simple terms C)Written ... accurately D)Specifies a time frame for its accomplishment E)Detailed enough for marketing strategy implementation

Last Answer : E)Detailed enough for marketing strategy implementation

Personality characteristics, perception, motives, ability, knowledge and attitudes: A)operate independently of environmental influences B)can be measured accurately by marketers C)are psychological forces that may influence consumers'behaviour D)are external forces that affect consumers' behaviour

Description : Personality characteristics, perception, motives, ability, knowledge and attitudes: A)operate independently of environmental influences B)can be measured accurately by marketers C)are psychological ... that may influence consumers'behaviour D)are external forces that affect consumers' behaviour

Last Answer : C)are psychological forces that may influence consumers'behaviour

In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Description : In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Last Answer : In a standard multimeter for measuring AC voltage, parameter of RMS voltage is measured

The power delivered to a 3-phase load can be measured by the use of two wattmeters only

Description : The power delivered to a 3-phase load can be measured by the use of two wattmeters only when the  (a) load is unbalanced (b) load is balanced (c) three phase load is connected to the source through three wires (d) three phase load is connected to the source through four wires

Last Answer : The power delivered to a 3-phase load can be measured by the use of two wattmeters only when the three phase load is connected to the source through three wires 

True value has been 50 whereas measured value is 40 then the percentage error in the reading

Description : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be ______.  (A) 20% (B) 40% (C) 50% (D) 30%

Last Answer : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be 20%. 

The self inductance of a coil can be measured using

Description : The self inductance of a coil can be measured using (A) Wien’s Bridge (B) Schering Bridge (C) Anderson’s Bridge (D) Wheatstone Bridge

Last Answer : The self inductance of a coil can be measured using Anderson’s Bridge

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But

Description : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 ... resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

Last Answer : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, ... resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is 100

Dielectric loss in a capacitor is best measured by

Description : Dielectric loss in a capacitor is best measured by (A) Wien Bridge (B) Schering Bridge (C) Anderson Bridge (D) Heaviside-Campbell Equal Ratio Bridge

Last Answer : Dielectric loss in a capacitor is best measured by Schering Bridge

The dielectric loss of capacitance can be measured by

Last Answer : The dielectric loss of capacitance can be measured by Schering bridge.

The EMF of Weston standard cell is measured using

Last Answer : The EMF of Weston standard cell is measured using Potentiometer.

The induction of a high Q inductor can be measured by a

Last Answer : The induction of a high Q inductor can be measured by a Hay Bridge.

The power of a n-phase circuit can be measured by using a minimum of

Last Answer : The power of a n-phase circuit can be measured by using a minimum of (n - 1) wattmeter elements

The frequency can be measured by using:

Last Answer : Weins bridge 

Alternating current is measured by?

Last Answer : Alternating current is measured by induction ammeter.

In an Anderson bridge, the unknown inductance is measured in terms of?

Last Answer : In an Anderson bridge, the unknown inductance is measured in terms of known capacitance and resistance.

A direct current can be measured by?

Last Answer : A direct current can be measured by a D.C. potentiometer in conjunction with a standard resistance.

A voltage of about 200 V can be measured?

Description :

Last Answer : A voltage of about 200 V can be measured a D.C. potentiometer in conjunction with a volt ratio box.

Resistances can be measured with the help of?

Last Answer : Resistances can be measured with the help of ohmmeters and resistance bridges.

A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is

Description : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is A) Manganin wire of 20 m Ω B) Constantan wire of 20 m Ω C) Manganin wire of 25 m Ω D) Constantan wire of 25 m Ω

Last Answer : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is Manganin wire of 25 m Ω

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD)

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Last Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

An ammeter has a current change of 0—5A and its internal resistance is 0.2 ohm. In order to Change the range

Description : An ammeter has a current change of 0-5A and its internal resistance is 0.2 ohm. In order to Change the range to 0-25 A, wear need to add a resistance of  A) 0.8 ohm in series with the meter B) ... series with the meter C) 0.04 ohm in parallel with the meter D) 0.05 ohm in parallel with the meter

Last Answer : An ammeter has a current change of 0—5A and its internal resistance is 0.2 ohm. In order to Change the range to 0-25 A, wear need to add a resistance of 0.05 ohm in parallel with the meter

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

Resistance grounding is normally used for :

Description : Resistance grounding is normally used for :  (A) high voltage long over head transmission lines  (B) low voltage short over head transmission lines  (C) extra high voltage long over head transmission lines  (D) all the above

Last Answer : Resistance grounding is normally used for : low voltage short over head transmission lines

A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω

Description : A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is (A) 2.5 W (B) 5 W (C) 32.5 W (D) 35 W

Last Answer : A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is 35 W

When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially

Description : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance

Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm

Description : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Last Answer : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

The transducer with negative temperature co-efficient of resistance is

Description : The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

The internal resistance of the ammeter should ideally be

Last Answer : The internal resistance of the ammeter should ideally be Zero.

The absolute measurement of resistance is done by

Last Answer : The absolute measurement of resistance is done by Lorenz method.

The internal resistance of an ammeter should be

Last Answer : The internal resistance of an ammeter should be Very small.

The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. ...

Description : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used?

Last Answer : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. 99.99 K ohms is the value of series resistor to be used.

The material used to make standard resistance is:

Last Answer : The material used to make standard resistance is: Manganin

In a dynamo-meter type of moving coil instrument a swamping resistance is provided in order to:

Last Answer : In a dynamo-meter type of moving coil instrument a swamping resistance is provided inorder to: Provide equal time constant for moving coil and fixed coil, when used for ac measurement

To measure a resistance with the help of a potentiometer it is?

Last Answer : To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

For measuring a very high resistance we should use?

Last Answer : For measuring a very high resistance we should use Meggar.

When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially...

Description : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is ?

Last Answer : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is all right.

The resistance in the circuit of the moving coil of a dynamometer wattmeter should be?

Last Answer : The resistance in the circuit of the moving coil of a dynamometer wattmeter should be high.

Which is an instrument which measures insulation resistance of an electric circuit relative to earth and one another?

Last Answer : Meggar is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.

A moving-coil permanent-magnet instrument can be used as what by using a low resistance shunt?

Last Answer : A moving-coil permanent-magnet instrument can be used as ammeter by using a low resistance shunt.

do ammeters have resistance?

Last Answer : Yes ammeter has its own resistance Not only ammeter every electrical devices has there own resistance practicaly

can voltmeter measure resistance?

Last Answer : Voltmeter is used to measure voltage in a circuit.Ohmmeter is used to measure the resistance of a component in a circuit.