I need a central shock absorber for Java

Cheap
by

1 Answer

Answer :

Need Answer
by

Related questions

Can I replace the front fork on my bicycle with a suspension/shock absorber type fork. Should it be done by a pro?

Description : Can I replace the front fork on my bicycle with a suspension/shock absorber type fork. Should it be done by a pro?

Last Answer : You can change the fork and I figure it should probably be done by someone who knows what they are doing.

Does the Casio watch have a built-in shock absorber?

Description : Does the Casio watch have a built-in shock absorber?

Last Answer : Yes, the casio watch has a built in shock absorber.

Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Description : Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Last Answer : (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

The tissues which act as shock absorber is

Description : The tissues which act as shock absorber is 

Last Answer : adipose tissue.

V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Description : V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Last Answer : High

The advantages of electrometric bearings are a) Permits movement of the structure in all directions b) Serves as a shock absorber due to anti-vibration properties of elestomeric c) better dispersion of longitudinal forces to the approaches d) All of the above*

Description : The advantages of electrometric bearings are a) Permits movement of the structure in all directions b) Serves as a shock absorber due to anti-vibration properties of elestomeric c) better dispersion of longitudinal forces to the approaches d) All of the above*

Last Answer : d) All of the above*

Explain the constructional features of Gas filled shock Absorber with sketch.

Description : Explain the constructional features of Gas filled shock Absorber with sketch.

Last Answer : Features: 1. Control tire motion better than non gas shock absorber 2. Vibration is reduced 3. Reduced aeration. 4. Improved handling.

State the function of Shock Absorber

Description : State the function of Shock Absorber

Last Answer : Function of Shock Absorber: The shock absorber is a part of suspension system used as springing device to compromise between flexibility and stiffness. It absorbs the energy of shock converted into the vertical movement of the axle by providing damping and dissipating the same in to heat.

Cytokines are endogenous signals that stimulate: A. Local cell proliferation within the wound. B. The central nervous system to initiate fever. C. The production of “acute-phase proteins.” D. Hypoferremia. E. Septic shock.

Description : Cytokines are endogenous signals that stimulate: A. Local cell proliferation within the wound. B. The central nervous system to initiate fever. C. The production of “acute-phase proteins.” D. Hypoferremia. E. Septic shock.

Last Answer : Answer:ABCD DISCUSSION: Although cytokines exert primarily autocrine and paracrine effects, they may also cause systemic effects

Which services build the SAP Java Central Services Instance for AS Java 7.10 and higher? A. Message Server and EnqueueServer B. Message Server, Enqueue Server and Gateway Service C. Message Server, Enqueue Server and ICM D. Message Server, Enqueue replicated Server and Gateway Service E.

Description : Which services build the SAP Java Central Services Instance for AS Java 7.10 and higher? A. Message Server and EnqueueServer B. Message Server, Enqueue Server and Gateway Service C. Message Server, Enqueue Server and ICM D. Message Server, Enqueue replicated Server and Gateway Service E.

Last Answer : B. Message Server, Enqueue Server and Gateway Service

Which instances of an SAP system require a running database during their startup? Note: there are 2 correct answered to this question. ? A. Java Central Services Instance B. Additional Application Server Instance C.ABAP Central Services Instance D. Primary Application Server Instance

Description : Which instances of an SAP system require a running database during their startup? Note: there are 2 correct answered to this question. ? A. Java Central Services Instance B. Additional Application Server Instance C.ABAP Central Services Instance D. Primary Application Server Instance

Last Answer : B. Additional Application Server Instance

Which of the following quantities need not be fixed before starting the design of a co-current absorber? (A) Heat gain or loss (B) Flow rate of entering liquid (C) Flow rate of gas (D) None of these

Description : Which of the following quantities need not be fixed before starting the design of a co-current absorber? (A) Heat gain or loss (B) Flow rate of entering liquid (C) Flow rate of gas (D) None of these

Last Answer : (B) Flow rate of entering liquid

An absorber separated two chemicals. How do you make one chemical go through one specific pipeline and another chemical go through another one to get to their intended destinations after separation?

Description : An absorber separated two chemicals. How do you make one chemical go through one specific pipeline and another chemical go through another one to get to their intended destinations after separation?

Last Answer : For what I'm working on there is going to be two chemicals in one absorber tower but both are going to have to go separate ways, and I was wondering how do you control which pipes the chemicals take and how do they get in there! I hope somebody can answer my question!

Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Description : Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Last Answer : Ans: d

Outside of cooking utensils are generally left black from below because – (1) it is difficult to clean daily. (2) black surface is a good conductor of heat. (3) black surface is a poor conductor of heat. (4) black surface is a good absorber of heat.

Description : Outside of cooking utensils are generally left black from below because – (1) it is difficult to clean daily. (2) black surface is a good conductor of heat. (3) black surface is a poor conductor of heat. (4) black surface is a good absorber of heat.

Last Answer : (4) black surface is a good absorber of heat. Explanation: The outside surface of a utensil used for heating is coated black so that it may absorb more heat and make heating quicker. This is because black surface is a good absorber of heat.

A white and smooth surface is – (1) good absorber and good reflector of heat (2) bad absorber and good reflector of heat (3) good absorber and bad reflector of heat (4) bad absorber and bad reflector of heat

Description : A white and smooth surface is – (1) good absorber and good reflector of heat (2) bad absorber and good reflector of heat (3) good absorber and bad reflector of heat (4) bad absorber and bad reflector of heat

Last Answer : (2) bad absorber and good reflector of heat Explanation: Shiny surfaces are poor absorbers of heat radiation and the best reflectors of heat radiation. Black surfaces are the best emitters and best absorber of heat radiation.

Before X-ray examination (coloured Xray) of the stomach, patients are given suitable salt of barium because. (1) barium is a good absorber of X-rays and helps stomach to appear clearly (2) barium salts are white in colour and this helps stomach to appear clearly (3) barium allows X-rays to pass through the stomach (4) barium salts are easily available

Description : Before X-ray examination (coloured Xray) of the stomach, patients are given suitable salt of barium because. (1) barium is a good absorber of X-rays and helps stomach to appear clearly (2) barium ... clearly (3) barium allows X-rays to pass through the stomach (4) barium salts are easily available

Last Answer : (1) barium is a good absorber of X-rays and helps stomach to appear clearly

The earth is a – (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Description : The earth is a – (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Last Answer : (3) good absorber and good radiator of heat Explanation: The earth's surface radiates as a black body, since it aborts and radiates with nearly 100 percent efficiency for its temperatures. Gases, on the contrary, are selective absorbers and radiators.

What is the difference between the lightning arrester and surge absorber?

Description : What is the difference between the lightning arrester and surge absorber?

Last Answer : Lightning arrester limits the duration and amplitude of the follow current while a surge absorber reduces the steepness of the wave front for a particular surge

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Description : Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Last Answer : D. Membrane absorber

What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Description : What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Last Answer : B. Helmholtz resonator

Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Description : Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Last Answer : (C) Both (A) & (B)

Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Description : Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Last Answer : (C) Poor absorber of neutrons

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Last Answer : (C) Karbate

In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Description : In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Last Answer : (B) Chemical stoneware

‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Description : ‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Last Answer : (A) Absorption factor

If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Description : If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Last Answer : (A) L/G

In an absorber, HETP does not vary with the (A) Flow rate of liquid (B) Flow rate of gas (C) Type and size of packing (D) None of these

Description : In an absorber, HETP does not vary with the (A) Flow rate of liquid (B) Flow rate of gas (C) Type and size of packing (D) None of these

Last Answer : (D) None of these

The operating line for an absorber is curved, when plotted in terms of (A) Mole fractions (B) Mole ratios (C) Partial pressure (D) Mass fractions

Description : The operating line for an absorber is curved, when plotted in terms of (A) Mole fractions (B) Mole ratios (C) Partial pressure (D) Mass fractions

Last Answer : (C) Partial pressure

Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Description : Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Last Answer : (C) > 1

In case of an absorber, the operating (A) Line always lies above the equilibrium curve (B) Line always lies below the equilibrium curve (C) Line can be either above or below the equilibrium curve (D) Velocity is more than the loading velocity

Description : In case of an absorber, the operating (A) Line always lies above the equilibrium curve (B) Line always lies below the equilibrium curve (C) Line can be either above or below the equilibrium curve (D) Velocity is more than the loading velocity

Last Answer : (A) Line always lies above the equilibrium curve

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is, N+2 = 6 log (yin /yout ).For 98% recovery of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Description : Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays ( ... of acetone, the number of trays required is/are: (A) 4 (B) 8 (C) 9 (D) 10

Last Answer : (C) 9

For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Description : For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Last Answer : (C) Dilute solution and isothermal operation

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

When both the fluids flow concurrently in an absorber, the slope of the operating line is (A) -ve (B) +ve (C) 1 (D) -1

Description : When both the fluids flow concurrently in an absorber, the slope of the operating line is (A) -ve (B) +ve (C) 1 (D) -1

Last Answer : (A) -ve

For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Description : For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Last Answer : (B) Mole ratio

The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Description : The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Last Answer : (C) -ve

The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Description : The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Last Answer : (C) Tangential to the equilibrium curve

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

For the same system, if the same liquid used in an absorber is decreased, the tower height will (A) Increase (B) Decrease (C) Remain unaffected (D) Decrease or increase; depends on the type of liquid

Description : For the same system, if the same liquid used in an absorber is decreased, the tower height will (A) Increase (B) Decrease (C) Remain unaffected (D) Decrease or increase; depends on the type of liquid

Last Answer : (A) Increase

H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Description : H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S ... by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Last Answer : (A) 2.0

. A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : . A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. In centrifugal pendulum absorber , the natural frequency in cycle per second can be given by A Fn =N √(R/L) B Fn =1/N √(R/L) C Fn =N/2 √(R/L) D Fn =N2 √(R/L)

Description : . In centrifugal pendulum absorber , the natural frequency in cycle per second can be given by A Fn =N √(R/L) B Fn =1/N √(R/L) C Fn =N/2 √(R/L) D Fn =N2 √(R/L)

Last Answer : A Fn =N √(R/L)

In a dynamic vibration absorber system, under tuned conditions which of the following relation holds good? A K 1 K 2 =M 1 M 2 B K 1 M 2 =M 1 K 2 C K 1 M 1 = K 2 M 2 D none of the mentioned

Description : In a dynamic vibration absorber system, under tuned conditions which of the following relation holds good? A K 1 K 2 =M 1 M 2 B K 1 M 2 =M 1 K 2 C K 1 M 1 = K 2 M 2 D none of the mentioned

Last Answer : B K 1 M 2 =M 1 K 2

Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Description : Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Last Answer : B constant speed machines

Frequency of centrifugal pendulum absorber is always proportional to A) Oscillating motion B) Transfer motion C) Speed of rotating body D) All of the above

Description : Frequency of centrifugal pendulum absorber is always proportional to A) Oscillating motion B) Transfer motion C) Speed of rotating body D) All of the above

Last Answer : C) Speed of rotating body

The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Description : The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Last Answer : B) 0.801 ; 1.248