V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High
by

1 Answer

Answer :

High
by

Related questions

Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Description : Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Last Answer : (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Can I replace the front fork on my bicycle with a suspension/shock absorber type fork. Should it be done by a pro?

Description : Can I replace the front fork on my bicycle with a suspension/shock absorber type fork. Should it be done by a pro?

Last Answer : You can change the fork and I figure it should probably be done by someone who knows what they are doing.

I need a central shock absorber for Java

Description : Cheap

Last Answer : Need Answer

Does the Casio watch have a built-in shock absorber?

Description : Does the Casio watch have a built-in shock absorber?

Last Answer : Yes, the casio watch has a built in shock absorber.

The tissues which act as shock absorber is

Description : The tissues which act as shock absorber is 

Last Answer : adipose tissue.

The advantages of electrometric bearings are a) Permits movement of the structure in all directions b) Serves as a shock absorber due to anti-vibration properties of elestomeric c) better dispersion of longitudinal forces to the approaches d) All of the above*

Description : The advantages of electrometric bearings are a) Permits movement of the structure in all directions b) Serves as a shock absorber due to anti-vibration properties of elestomeric c) better dispersion of longitudinal forces to the approaches d) All of the above*

Last Answer : d) All of the above*

Explain the constructional features of Gas filled shock Absorber with sketch.

Description : Explain the constructional features of Gas filled shock Absorber with sketch.

Last Answer : Features: 1. Control tire motion better than non gas shock absorber 2. Vibration is reduced 3. Reduced aeration. 4. Improved handling.

State the function of Shock Absorber

Description : State the function of Shock Absorber

Last Answer : Function of Shock Absorber: The shock absorber is a part of suspension system used as springing device to compromise between flexibility and stiffness. It absorbs the energy of shock converted into the vertical movement of the axle by providing damping and dissipating the same in to heat.

Using an organic fluid that boils at a low temperature means that energy could be regeneratedfrom waste fluids is known as ________. a) Heat exchanger b) Heat remover c) Heat pumps d) Heat absorber`

Description : Using an organic fluid that boils at a low temperature means that energy could be regeneratedfrom waste fluids is known as ________. a) Heat exchanger b) Heat remover c) Heat pumps d) Heat absorber

Last Answer : Heat pumps

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

What Are The Advantages And Disadvantages Of V Belt?

Description : What Are The Advantages And Disadvantages Of V Belt?

Last Answer :  The main advantages of V belt are it has more gripping power, long life and it occupies less space.  Disadvantages are it is not fit for long distances and cross belt drive.

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Description : An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Last Answer : blackbody

What is considered as a perfect absorber as well as a perfect emitter?  A. Gray body  B. Black body  C. Real body  D. White body

Description : What is considered as a perfect absorber as well as a perfect emitter?  A. Gray body  B. Black body  C. Real body  D. White body

Last Answer : Black body

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Description : Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Last Answer : Large Capacity of water

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Description : What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Last Answer : B. Helmholtz resonator

A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Description : A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Last Answer : ANSWER: Y -- THERMAL EXPANSION

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Benefits of mechanization of agriculture is ….. a) it increases production c) low cost of work b) it increases efficiency d) all of the above

Description : Benefits of mechanization of agriculture is ….. a) it increases production c) low cost of work b) it increases efficiency d) all of the above

Last Answer : all of the above

Traditionally, waste heat of low temperature range ________ has not been used for electricitygeneration despite efforts by ORC companies, mainly because the Carnot efficiency is rather low. a) 0-250 °C b) 0-150 °C c) 0-200 °C d) 0-120 °C

Description : Traditionally, waste heat of low temperature range ________ has not been used for electricitygeneration despite efforts by ORC companies, mainly because the Carnot efficiency is rather low. a) 0-250 °C b) 0-150 °C c) 0-200 °C d) 0-120 °C

Last Answer : 0-120 °C

What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Last Answer : L = 2C + 1.57 (D +d ) + (D+d)2/ 4C

What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Last Answer : L = 2C + 1.57 (D + d) + (D-d)2 /4C

What Are The Rules For Belt Drives?

Description : What Are The Rules For Belt Drives?

Last Answer :  The distance between two pulleys should not be less than three times the diameter of the larger pulley.  The slack side should be uppermost which may increase the arc of contact.  The ratio of ... should not exceed 6:1.  If necessary ,a jockey pulley should be used to minimize the slip.

Write Short Notes On Creep And Slip In Belt Drive?

Description : Write Short Notes On Creep And Slip In Belt Drive?

Last Answer :  The movement of belt upon the face of rim or outer surface of driver and driven pulleys within the area of arc of contact is called creep in belt drive.  If the belt is loosely fitted on pulleys, it slips down which is called slip in belt drive.

What Is Dressing In Belt Drive?

Description : What Is Dressing In Belt Drive?

Last Answer : To avoid slip or creep, the resin powder or paste is poured in between the outer surface of pulley and belt for increasing the tension is called dressing.

Define Crowning In Belt Drive?

Description : Define Crowning In Belt Drive?

Last Answer : The outer surface or face of rim of the pulley is made in convex form to keep the belt in center when it is in movement, it is called crowning.

What Are The Points To Be Noted When Selecting A Belt?

Description : What Are The Points To Be Noted When Selecting A Belt?

Last Answer :  Load of the machine.  Speed of the machine.  Capacity of machine.  Atmosphere of the climate.

What Are The Reasons For Slipping Of Belt?

Description : What Are The Reasons For Slipping Of Belt?

Last Answer :  The belt is loosely fitted.  Overloading on belt drive.  Misalignment of pulleys.

What Is Meant By A Belt Drive?

Description : What Is Meant By A Belt Drive?

Last Answer : When power is driven from driver pulley to driven pulley by means of belt , it is known as belt drive. In open belt drive both the pulleys run in the same direction and in cross belt drive both the pulleys run in opposite direction to each other.

seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Description : seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Last Answer : ans c

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Weeping in a distillation column (A) Increases tray efficiency (B) Provides large interfacial surface for mass transfer (C) Results due to very high gas velocity (D) Results due to very low gas velocity

Description : Weeping in a distillation column (A) Increases tray efficiency (B) Provides large interfacial surface for mass transfer (C) Results due to very high gas velocity (D) Results due to very low gas velocity

Last Answer : (D) Results due to very low gas velocity

To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Description : To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Last Answer : (A) Interfacial surface between liquid and gas phase should be large

Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Description : Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Last Answer : (A) Compressive strength

Hanging Valley is very common in – (1) high mountains (2) sub-Arctic region (3) glaciated areas (4) coastal belt

Description : Hanging Valley is very common in – (1) high mountains (2) sub-Arctic region (3) glaciated areas (4) coastal belt

Last Answer : (2) sub-Arctic region Explanation: When the glaciers melt, the tributary troughs are left as hanging valleys high on the walls of the main glacial valley. A hanging valley is a tributary ... commonly associated with U-shaped valleys when a tributary glacier flows into a glacier of larger volume.

Hanging Valley is very common in (1) high mountains (2) sub-Arctic region (3) glaciated areas (4) coastal belt

Description : Hanging Valley is very common in (1) high mountains (2) sub-Arctic region (3) glaciated areas (4) coastal belt

Last Answer : glaciated areas

Which of the following are the benefits of E-marketing? i) Speed ii) Reach and Penetration iii) Ease and Efficiency iv) Low Cost v) Targeted audience A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v

Description : Which of the following are the benefits of E-marketing? i) Speed ii) Reach and Penetration iii) Ease and Efficiency iv) Low Cost v) Targeted audience A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

(v) The theory of the Arab origin is supported by the long coat with embroidered waist-belt they wear. (para 3) -Other

Description : (v) The theory of the Arab origin is supported by the long coat with embroidered waist-belt they wear. (para 3) -Other

Last Answer : (v) draws support from

The V-belt on the washing machine slips

Description : Is there anything you can do about it? Or does he have to buy a new one? Sometimes when the washing machine is full it slips.

Last Answer : For most washing machines, you just need to put it on.

The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Description : The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Last Answer : c) 15 mm

V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Description : V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Last Answer : c. both (a) and (b)

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device