On what does the resistance of conductive wire depend ?

1 Answer

Answer :

Depending on the area of the cross section

Related questions

Description : What are the conductors of electric charge in electrically conductive metal wire ?

Last Answer : Free electrons in electrically conductive metal wires are conductors of electricity.

Description : What electricity is used in conductive wire ?

Last Answer : Conductive wires are used to conduct electricity.

Description : How does the resistance of a wire depend on its dimensions?

Last Answer : Feel Free to Answer

Description : Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Last Answer : c. will depend on the type of material of the wire

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

Description : Overall thermal resistance for conductive heat transfer through a series of flat resistances is equal to the (A) Maximum resistance in the series (B) Sum of all resistances (C) Average of all resistances (D) Minimum resistance presents in the series

Last Answer : (B) Sum of all resistances

Description : The spring constant of a helical compression spring does not depend on a. Coil diameter b. Material strength c. Number of active turns d. wire diameter

Last Answer : b. Material strength

Description : resistivity of wire depend on?

Last Answer : Resitivity of wire depends on material, electrical resistance of that material, area of cross section and length.

Description : Are lip studs (and other body jewelry) electro-conductive?

Last Answer : Normally, studs and the like are of silver or gold which are excellent electrical conductors.

Description : The conductive qualities of water will allow electrical current to travel through it. But, is there a point where there is too much water for the electricity to administer a fatal or severe shock?

Last Answer : Electricity always follows the path of least resistance, so, no, the current is not “diluted.” A fatal shock can only occur if the current flows through the heart.

Description : How do magnetic fields around connected conductive materials take shape?

Last Answer : I think that while the current supplied by the wire is flowing through the metal balls they will generate a magnetic field in the same way a field surrounds a wire with electricity flowing through it. ... that in the same way it passes between atoms in a wire their magnetism will not repel them.

Description : Do you think we could have a nationwide electrical grid that depends on highly conductive quantum nanowire?

Last Answer : I don’t know much about conductive quantum nanowire, but I have read Pattington Bear.

Description : Is human existence in the shadow of a nanny state conductive to "Aristotelian happiness"?

Last Answer : Are you implying that we are heading toward a nanny state? Is that what’s behind this question?

Description : What is non-conductive ?

Last Answer : Substances through which electric current cannot flow are called insulators . Such as- glass , wood , rubber , plastic etc. non-conductive material. The electrical conductivity of non-conductive matter is very low ... radiation is very high. The relative radius of the insulator is about 10 12 Ω m .

Description : How to make pure water electrically conductive ?

Last Answer : Pure water does not conduct electricity. This is because the ions required for the conduction of electricity are not found in pure water. But in pure water , water carries electricity if the ... the presence of sufficient amount of ions in pure water can be ensured, it conducts electricity.

Description : What are the properties of electrically conductive matter ?

Last Answer : Characteristics are 1) High electrical conductivity 2) High tensile strength 3) Must be cheap in price 4) Should not be brittle.

Description : Why are metals called electrically conductive ?

Last Answer : Electrons can move freely through metals , so metals are called electrically conductive.

Description : What is a conductor ? What is a conductive substance ?

Last Answer : Substances that have sufficient amount of free electrons and through which electricity can flow easily are called conductors.

Description : Why is the human body called conductive ?

Last Answer : Electricity flows through the human body so it is called conductive

Last Answer : Covalent qualified electrical conductor

Last Answer : Ionic compounds are electrically conductive

Last Answer : A substance that cannot conduct electricity is called non-conductive

Last Answer : Features These Hall , 1 ) high Electricity Conductivity 2 ) High Pull Tolerance Power 3 ) Price Cheap To be Will be 4 ) Fragile To be It won't work.

Description : computer In the case Information Of transportation For Conductive On the way What? Say ?

Last Answer : Computer In the case Information Of transportation For Conductive On the way Live Says.

Description : What is a conductive shirt?

Last Answer : Conductive? Maybe such ..... to be seductive, seductive (inlove)

Description : How much more thermally conductive are copper pots and pans compared to aluminum or stainless steel?

Last Answer : Copper is amongst the most thermally conductive material on the market. In most cases, copper is too hot for most cooking purposes, which is why aluminum and stainless steel are more popular.

Description : Where can I buy conductive gel in Mississauga?

Last Answer : if you are looking for a speciality item, take a look here. I hope this was what you meant, since it can also be confused with other things. http://www.therapistschoice.com/Products/pproducts.asp?pMode=New&NavbarMode=Product&pCategory=PAIN%20MANAGEMENT

Description : Are All Conductive Polymers, Conjugated Polymer?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Description : Coast Guard Regulations (46 CFR) require each switchboard to have ___________. A. non-conductive deck covering at the frount B. non-conductive deck coverings at the rear C. a name plate for each circuit breaker D. all the above

Last Answer : Answer: D

Description : Define photo conductive polymer. Give its examples and applications.

Last Answer : Photo conductive polymer: These are the polymers which conduct electricity only in the presence of light. Examples: i) PVK or poly(N-vinyl carbazole ) ii) Poly (vinylpyrene),iii) poly(2- ... resistors are often used include camera light meters, street lights, clock radios and infrared detectors.  

Description : Define the terms: i) Photo conductive polymers ii) Liquid crystal polymers 

Last Answer : i) Photo conductive polymers: These are the polymers which conduct electricity only in the presence of light.  ii) Liquid crystal polymers: These are a class of aromatic polyester polymers. These polymers have tendency to align their chains parallel over a long distance from their melt or solution.

Description : If the conductive loop on the rotor of a simple two -pole, single-phase generator rotates at the rate of 400 rps. The frequency of the induced output voltage will be: A. 40 Hz B. 100 Hz C. 400 Hz D. indeterminable

Last Answer : If the conductive loop on the rotor of a simple two -pole, single-phase generator rotates at the rate of 400 rps. The frequency of the induced output voltage will be: 400 Hz

Description : A highly conductive material must have?

Last Answer : A highly conductive material must have highest conductivity, lowest temperature co-efficient, good mechanical strength, good corrosion resistance, easy solderable and drawable quality.

Description : Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

Last Answer : Answer : On its density. Because it depends on how close or how far the atom must be seen.

Description : How does the resistance of the conductor depend on the length and cross section of the conductor ?

Last Answer : Conductor resistance is proportional to the length of the conductor and disproportionate to the cross section .

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

Description : The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Last Answer : (A) Area of surface in contact

Description : How do I work out the area or length of a wire when I only know the resistance/conductance and the length/area?

Last Answer : if cunductance = conductivity x area/length then length = conductivity / conductance x Area i think, if the equation is transposed correctly, it’s been a while since school maths. better check that one though.

Description : Which wire has more resistance ?

Last Answer : The longer the wire, the greater the resistance of the wire.

Description : A copper wire has a resistance of \( 0.60 hm \). Anozner copper wire of the samemass as the first one is dou ble in length of the first. Find the resistance of the second wire.

Last Answer : A copper wire has a resistance of \( 0.6 0hm \). Another copper wire of the same mass as ... of the first. Find the resistance of the second wire.

Description : The resistance of a silver wire at `0^(@)C " is " 1.25 Omega`. Upto what temperature it must be heated so that its resistance is doubled ? The tempera

Last Answer : The resistance of a silver wire at `0^(@)C " is " 1.25 Omega`. Upto what temperature ... temperature be same for all silver conductors of all shapes ?

Description : The temperature coefficent of resistance of a wire is 0.00125 per `.^(@)C`, At 300 K, its resistance is `1Omega`. At what temperature will its resista

Last Answer : The temperature coefficent of resistance of a wire is 0.00125 per `.^(@)C`, At 300 K, ... At what temperature will its resistance become `2 Omega` ?

Description : A plantinum wire has resistance of `10 Omega` at `0^(@)C` and `20 Omega` at `273^(@)C`. Find the value of coefficient of resistance.

Last Answer : A plantinum wire has resistance of `10 Omega` at `0^(@)C` and `20 Omega` at `273^(@)C`. Find the value of coefficient of resistance.

Description : A wire whose resistance is 90 ohm is cut into 3 pieces of equal lengths which are then arranged in parallel. Calculate the resistance of the combinati

Last Answer : A wire whose resistance is 90 ohm is cut into 3 pieces of equal lengths which are then ... in parallel. Calculate the resistance of the combination.

Description : A uniform wire which connected in parallel with the 2 m long wire, will give a resistance of `2.0 Omega`.

Last Answer : A uniform wire which connected in parallel with the 2 m long wire, will give a resistance of `2.0 Omega`.

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

Description : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its resistance is `1 Omega`. At what temperature the resistance o

Last Answer : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its ... the resistance of the wire will be `2 Omega` ?

Description : A uniform wire is cut into four segments. Each segment is twice as long as the earlier segment. If the shortest segment has a resistance of `4 Omega`,

Last Answer : A uniform wire is cut into four segments. Each segment is twice as long as the earlier segment. ... Omega`, find the resistance of the original wire.

Description : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in the ratio ` 3 : 2`. If the resistance of the wire B is

Last Answer : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in ... `180 Omega`, find the resistance of the wire A.