How much more thermally conductive are copper pots and pans compared to aluminum or stainless steel?

How much more thermally conductive are copper pots and pans compared to aluminum or stainless steel?
by

1 Answer

Answer :

Copper is amongst the most thermally conductive material on the market. In most cases, copper is too hot for most cooking purposes, which is why aluminum and stainless steel are more popular.
by

Related questions

Are copper pots and pans better to use than nonstick aluminum pans?

Description : Are copper pots and pans better to use than nonstick aluminum pans?

Last Answer : Copper pots and pans will retain heat for a longer time whereas aluminum pans will heat up quickly but they will not retain that heat for very long. Copper is usually much heavier than aluminum also ... out on the market whereas aluminum is one of the cheapest and is readily available at any store.

What are the health benefits of using copper pots and pans?

Description : What are the health benefits of using copper pots and pans?

Last Answer : Copper is known to decrease inflammation associated with Arthritis and similar diseases. It is also known to inactivate harmful microbes including L. pneumophila, the principal agent of Legionnaire' disease, methicillin-resistant Staphyloccous aureus, and E. Coli.

What are the best types of cooking utensils to use on stainless steel pans?

Description : What are the best types of cooking utensils to use on stainless steel pans?

Last Answer : It is best to use vinyl and silicone cooking utensils with your stainless steel cookware, but other stainless steel utensils are fine too. Since stainless steel does not have a coating that you can scratch off. you can use anything with it!

What are some good ways to clean stainless steel pots that I have burned food in?

Description : What are some good ways to clean stainless steel pots that I have burned food in?

Last Answer : Squeeze some high-quality dish cleanser soap into the middle of the bottom of the pot, then place the pot center under the faucet, with very hot water already flowing, and at high pressure. The water ... bit come off more easily. Allow the pot to soak for a few hours, and then wash normally.

Why do some pots and pans cost more than others?

Description : Why do some pots and pans cost more than others?

Last Answer : And it depends on if it has a famous Chef’s name stuck on it. Paula Deen cookware is expensive.

Do you put your nonstick pots and pans in the dishwasher?

Description : Do you put your nonstick pots and pans in the dishwasher?

Last Answer : I heard that the dishwasher will ruin them. I try to do them by hand.

Which set of Pots and Pans should I buy?

Description : Which set of Pots and Pans should I buy?

Last Answer : “Calphalon”

How are woks different from regular pots and pans?

Description : How are woks different from regular pots and pans?

Last Answer : How funny! I almost bought a wok at IKEA today. But that place is such a wallet-suck, with their .99 oven mitt here and their $1.99 tealight candle holders there Anyway. Woks. It's the shape. The way ... , but the food will stay on the side, as opposed to a pot. This explains it all a bit better.

What do you call those who make pots and pans ?

Last Answer : Those who make pots and pans are called blacksmiths.

How do you clean old pots and pans?

Description : Should I let the black sediment on the bottom of the pots blow away? Or do you use a cleaner for that? Can you advise?

Last Answer : This dirt is removed very poorly and there is actually nothing to do with it. You will never get rid of the blackness that settles on the pans from the gas burner. This should be done immediately and each ... a lot, but never completely. He doesn't have gas anymore, so my dishes are no longer dirty.

Why are the pots and pans made of metal?

Description : Why are the pots and pans made of metal?

Last Answer : Most metal has the ability to conduct and withstand heat for along period of time.For e.g. Stainless Steel cookware with an encapsulated aluminiumbase make heats conduction easy and are also much easier tomaintain and quite indestructible.

What is the best brand of pots and pans to buy these days I want something that will last over the years.?

Description : What is the best brand of pots and pans to buy these days I want something that will last over the years.?

Last Answer : Depends on what your application and budget is. If you want commercial kitchen quality, buy from a commercial kitchen store. If you want to stick with home-type cookware, copper-clad Revere ware has a very good reputation for durability.

Are dishwashers designed to wash pots and pans too?

Description : Are dishwashers designed to wash pots and pans too?

Last Answer : Yes but do not put cast iron pans in them.

Is Belgique cookware good quality pots and pans?

Description : Is Belgique cookware good quality pots and pans?

Last Answer : Belgique cookware from Tools of the Trade are a set of stainless steel pots and pans that have rounded sides to them rather than straight to distribute heat in a more efficient manner. Belgique ... appearance so this series sets itself apart from the standard products that Tools of the Trade offers.

Does it matter what your pots and pans are made of?

Description : Does it matter what your pots and pans are made of?

Last Answer : Typically, your pots that are made from iron will take a little longer to eat up as opposed to aluminum. There is some comound in the aluminum that allows the heat to spread quicker through it and thereby cook your food faster.

Are copper pans more durable than steel or ceramic?

Description : Are copper pans more durable than steel or ceramic?

Last Answer : Copper pans are a lot more durable than ceramic pans. However, they are not as durable as steel pans.

What is the reason for the use of aluminum in cooking pots ?

Description : What is the reason for the use of aluminum in cooking pots ?

Last Answer : : Aluminum is usually used in cooking pots because it conducts heat quickly and cooks food quickly.

Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Last Answer : Ans:(b)

Which of the following metals is used in the electromagnets? (a) Soft iron (b) Stainless steel (c) Cobalt (d) Copper

Description : Which of the following metals is used in the electromagnets? (a) Soft iron (b) Stainless steel (c) Cobalt (d) Copper

Last Answer : Ans:(a)

The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4

Description : The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4

Last Answer : Ans:(a)

Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Last Answer : (C) Tin

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Last Answer : (C) Reinforced concrete lined with lead

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Description : Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Last Answer : A. Chromium (Answer)

Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Last Answer : (C) Lead

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Last Answer : (B) Plain carbon steel

Material of construction of the electrode used in the electric resistance welding is (A) Stainless steel (B) Graphite (C) Copper (D) Steel

Description : Material of construction of the electrode used in the electric resistance welding is (A) Stainless steel (B) Graphite (C) Copper (D) Steel

Last Answer : Option C

Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Description : Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Last Answer : Option B

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

Which of the following materials is a good insulator? A. steel B. aluminum C. glass D. copper

Description : Which of the following materials is a good insulator? A. steel B. aluminum C. glass D. copper

Last Answer : Answer: C

The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Last Answer : Answer: D

The outside of the steel can is protected from rust by a thin layer of ____. a. tin c. aluminum b. copper d. silver

Description : The outside of the steel can is protected from rust by a thin layer of ____. a. tin c. aluminum b. copper d. silver

Last Answer : a. tin

Can I use copper pans on my induction stove?

Description : Can I use copper pans on my induction stove?

Last Answer : It is not common for copper pans to be compatible with induction stoves. All-Clad has recently designed Copper Core that wasn't previously compatible but is now. Also you can purchase an adapter plate from Max Burton at Amazon.com

Will copper pans impart a bad taste to food that I cook in them?

Description : Will copper pans impart a bad taste to food that I cook in them?

Last Answer : No copper will not pass on any bad taste too your food when you cook. Copper is a great metal for cookwar due too its even heat displacement.

Is there anyone/and store in the SF bay area who can re-surface copper pots.

Description : Is there anyone/and store in the SF bay area who can re-surface copper pots.

Last Answer : You mean like these guys? I've seen their name pop up on a few pages thanks to my googling. I also saw this posted with a very enthusiastic review: F. Nicholas Retinning 4641 Telegraph Road Los Angeles, CA ... 263-0028 Hopefully, one of them can help. :) That's the closest I could find to San Fran.

Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most stable thermally?

Description : Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most stable thermally?

Last Answer : Metal carbonates decompose on heating to give metal oxide and carbon dioxide. Which of the metal carbonates is most ... C. `SrCO_(3)` D. `BaCO_(3)`

A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is thermally stable and has octahedral geometry. `X

Description : A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is thermally stable and has octahedral geometry. `X

Last Answer : A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is ... and has octahedral geometry. `X` can be

A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is thermally stable and has octahedral geometry. `X

Description : A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is thermally stable and has octahedral geometry. `X

Last Answer : A yellow coloured crystalline substance gave a colourless gas `X` on reaction with fluorine, which is thermally stable ... `SF_(2)` D. `S_(2)F_(6)`