What is the function of MCB ?

What is the function of MCB ?
by

1 Answer

Answer :

MCB's job is to automatically disconnect the circuit from the source by turning it on and off.
by

Related questions

State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch.

Description : State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch. 

Last Answer : i) MCB: Provide short circuit protection & over load protection to electrical loads.  ii) ELCB: Provides protection by detecting the unsafe magnitudes leakage currents flowing to earth and disconnecting ... rating.  iv) Switch: Make and break the electrical connection to the load manually.

What is the function of transformer bushing ?

Description : What is the function of transformer bushing ?

Last Answer : Answer : The transformer is brought out of the tank by bushing at the winding terminals. These bushings are made of very fine porcelain. These are attached to the lid of the tank with a gasket ... the transformer winding. Their number , size and method of connection depend on the amount of voltage.

What is the function of Transformer's conservator ?

Description : What is the function of Transformer's conservator ?

Last Answer : Oil increases in volume when it is hot and decreases in volume when it is cold. A drum is placed on the tank to facilitate growth and reduction. This drum is called Conservator. It is ... the conservator, while when the volume decreases, the oil comes down from the conservator to the tank.

What is the function of phase limiter ?

Description : What is the function of phase limiter ?

Last Answer : A special part of the FM radio receiver is the limiter. If any type of amplitude modulation is present within the specified amplitude of the FM signal, it can be removed with the help of limiter by FM detection method. As a result, the operation of the FM discriminator is well accomplished.

What is the function of UPS ?

Description : What is the function of UPS ?

Last Answer : : UPS function UPS or Uninterruptable Power Supply is a device which automatically charges itself during the power supply and allows the LED to run from the AC line .

What is the function of logic gate ?

Description : What is the function of logic gate ?

Last Answer : Signals can be exchanged through binary arithmetic solutions.

What is the function of network hub ?

Description : What is the function of network hub ?

Last Answer : The hub of the network provides data exchange.

What is the function of capacitor ?

Description : What is the function of capacitor ?

Last Answer : The job of a capacitor is to hold an electric charge. Capacitors have the same capacity as a rechargeable battery to hold a charge , but in a very short range.

What is the function of charge controller ?

Description : What is the function of charge controller ?

Last Answer : Protect the battery from various damages. For example: overcharging battery swelling.

What is the function of solar panel ?

Description : What is the function of solar panel ?

Last Answer : : The function of a solar panel is to convert solar energy into electrical energy in the presence of sunlight.

What is the function of main switch ?

Description : What is the function of main switch ?

Last Answer : The function of the main switch is to control the entire user's circuit.

What is the function of control device ?

Description : What is the function of control device ?

Last Answer : The function of the control device is to control the current flow in the circuit.

What is the function of fuse ?

Description : What is the function of fuse ?

Last Answer : The function of the fuse is to protect the whole circuit from overheating due to high voltage.

What is the function of brush in DC generator ?

Description : What is the function of brush in DC generator ?

Last Answer : The brush on the DC generator looks a lot like a rectangle. The brush is used for contacts that supply the output. It is made of carbon graphite.

What is the function of oil in transformer ?

Description : What is the function of oil in transformer ?

Last Answer : The job of transformer oil is to cool the transformer. So that the transformer does not get hot and burn.

What is the function of damper in transmission line ?

Description : What is the function of damper in transmission line ?

Last Answer : : Using a damper on the transmission line protects the pole from vibration.

What is the full form of MCB ?

Last Answer : MCB Full: Mauritius Commercial Bank.

What are the difference MCB and CB?

Description : What are the difference MCB and CB?

Last Answer : The main difference between MCB, RCCB, and Isolators Isolators are generally used in power system while on the other hand, MCB is the circuit breaker. Isolators are manually-operated device, and on the contrary, the circuit breaker is the automatically-operated device.

What is the difference between MCB & MCCB, Where it can be used?

Description : What is the difference between MCB & MCCB, Where it can be used?

Last Answer : A: MCB is miniature circuit breaker which is thermal operated for overload condition and magnetically operated for short circuit protection. It is available in small current rating. MCCB is moulded case ... frequency may be inbuilt. Normally it is used where normal current is more than 100 A.

What are the points to be considered for MCB (miniature circuit breaker selection)?

Description : What are the points to be considered for MCB (miniature circuit breaker selection)?

Last Answer :  I(L)x1.25=I(MAX) maximum current. Mcb specification is done on maximum current flow in circuit.

What is the difference between MCB & MCCB, Where it can be used?

Description : What is the difference between MCB & MCCB, Where it can be used?

Last Answer : MCB is miniature circuit breaker which is thermal operated and use for short circuit protection in small current rating circuit. ▪ Normally it is used where normal current is less than 100A. ▪ MCCB ... under frequency may be inbuilt. ▪ Normally it is used where normal current is more than 100A.

Working of MCB practical

Description : Working of MCB practical

Last Answer : Practical Significance The switches and MCBs are the most important components of an electrical installation. They provide the safety & ease in smooth operation of the installation. It is essential to know the working ... . iii. Close the knife switch. iv. Observe the working of MCB.

Explain the use of the following components in electrical wiring system and give specification of each: (i) MCB (ii) ELCB

Description : Explain the use of the following components in electrical wiring system and give specification of each: (i) MCB (ii) ELCB

Last Answer : i) MCB (Miniature Circuit Breaker)  * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with load and ELCB is ... The low sensitivity ELCB are used for electrical machine the rating is in between the 3A to 10 A

State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Explain MCB and ELCB with connection diagram supplying single phase load.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

State the types of protections provided by MCB.

Description : State the types of protections provided by MCB. 

Last Answer : The types of protections provided by MCB: 1. MCB provides short circuit protection. 2. MCB provides overload protection

Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Explain the meaning of following terms: i) MCB ii) Socket outlet iii) Neutral iv) Fuse-link

Description : Explain the meaning of following terms: i) MCB ii) Socket outlet iii) Neutral iv) Fuse-link

Last Answer : i) MCB:  Miniature circuit breaker operates automatically at the time of fault or over load. And it is used for the protection of electrical installation. They are available from 0.5 A to 100 Amps. ... melts automatically at the time of fault or over load. Fuse must be replaced after the fault.

What is MCB?

Description : What is MCB?

Last Answer : MCB is a miniature circuit breaker. MCB is used for overcurrent protection. MCB have low rating as compared to MCCB. MCB have thermal trip unit and magnetic trip unit. MCB can also be ... faster as compared to thermal trip unit it disconnect very quickly and used for short circuit protection.

Current ratings of MCB for Air conditioners is generally used as _________.

Description : Current ratings of MCB for Air conditioners is generally used as _________. A. 10/15 Amp B. 5/10 A C. 20/25 Amp D. none of these 

Last Answer : Current ratings of MCB for Air conditioners is generally used as 10/15 Amp. 

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.