What is a flexible object or a full plastic object ?

What is a flexible object or a full plastic object ?
by

1 Answer

Answer :

An object is called a soft object or a full plastic object if it is distorted by applying force on it from outside.
by

Related questions

Where can I find flexible plastic?

Description : Where can I find flexible plastic?

Last Answer : You don't say what you're going to do with your cylinder but could you use something like this, a plastic chair mat, from an office supply store? The plastic is pretty strong, but still flexible. ... little cleats in it like the ones for carpeting. And if you look around you might find one cheaper.

What do you call the flexible plastic used on binder covers and file folders?

Description : What do you call the flexible plastic used on binder covers and file folders?

Last Answer : I think what you are talking about, is a form of Polyethylene.

Floppy disks which are made from flexible plastic material are also called? A) Hard disks B) High-density disks C) Diskettes D) Templates

Description : Floppy disks which are made from flexible plastic material are also called? A) Hard disks B) High-density disks C) Diskettes D) Templates

Last Answer : Answer : C

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

Maximum shear stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Flexible shafts (D) Plastic shafts

Description : Maximum shear stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Flexible shafts (D) Plastic shafts

Last Answer : (B) Steel shafts

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : Diskettes

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : c. Diskettes

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : c. Diskettes

Flexible Job / Freelancer for full income?

Description : Flexible Job / Freelancer for full income?

Last Answer : What are your skills? If you’re looking for a well-paying flexible job that requires little-no education or training, you would probably have better luck catching a leprechaun and finding his pot of gold. Waiting tables or bar tending might be the closest thing I can think of.

Which of the following are benefit of IaaS? A. Flexible and efficient renting of computer hardware. B. Portability, interoperability with legacy applications. C. Full control of the computing resources through administrative access to VMs. D. All of the above

Description : Which of the following are benefit of IaaS? A. Flexible and efficient renting of computer hardware. B. Portability, interoperability with legacy applications. C. Full control of the computing resources through administrative access to VMs. D. All of the above

Last Answer : All of the above

Working with small plastic gears?

Description : Working with small plastic gears?

Last Answer : answer:As long as all the gears will mesh, it's just a matter of counting teeth. For a simple example, if one gear has 10 teeth and a second has 20, then you have a 2/1 or ½ gear ratio ... motor running accurately at 6,000 RPM and a set of gears that reduces that speed by a factor of 6000/1.

How does glow-in-the-dark plastic "trap" light?

Description : How does glow-in-the-dark plastic "trap" light?

Last Answer : answer:Here is a good article. All glow-in-the-dark products contain phosphors. A phosphor is a substance that radiates visible light after being energized. Phosphors have three characteristics: The type of ... The phosphor is mixed into a plastic and molded to make most glow-in-the-dark stuff.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

The wire having a green plastic covering is a _______. (1) Line wire (2) Neutral wire (3) Earth wire (4) None of these

Description : The wire having a green plastic covering is a _______. (1) Line wire (2) Neutral wire (3) Earth wire (4) None of these

Last Answer : (3) Earth wire Explanation: The earth wire is a crucial part of the home electrical system and is designed to protect against electric shock.

The plastic material commonly used for making gear wheels is – (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Description : The plastic material commonly used for making gear wheels is – (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : (2) Nylons Explanation: Popular materials for plastic gears are acetal resins such as DELRIN, Duracon M90; nylon resins such as ZYTEL, NYLATRON, MC901 and acetal copolymers such as ... vary with regard to strength, rigidity, dimensional stability, lubrication requirements, moisture absorption, etc.

Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Description : Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Last Answer : (3) Steel Explanation: In physics, elasticity is a physical property of materials which return to their original shape after the stress that caused their deformation is no longer applied. ... are characterized by a linear relationship between stress and strain (the relative amount of deformation).

Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Description : Substances that elongate considerably and undergo plastic deformation before they break are known as A. brittle substances B. breakable substances C. ductile substances D. elastic substances

Last Answer : ductile substances

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

The index of refraction of a plastic material is 1.5. The speed of light in this material relative to that in a vacuum is: w) 2 x) 1.5 y) 2/3 z) 1/2

Description : The index of refraction of a plastic material is 1.5. The speed of light in this material relative to that in a vacuum is: w) 2 x) 1.5 y) 2/3 z) 1/2

Last Answer : ANSWER: Y -- 2/3

What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Description : What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Last Answer : ANSWER: Y -- YIELD STRENGTH

The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Description : The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Last Answer : ANSWER: Y -- FERROMAGNETIC

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Description : Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Last Answer : Steel

The plastic material commonly used for making gear wheels is (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Description : The plastic material commonly used for making gear wheels is (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : Nylons

What that thin flexible sealing surface tin cans have is called?

Description : What that thin flexible sealing surface tin cans have is called?

Last Answer : It’s a plastic film to keep the food from coming into contact with the metal of the can. Beer cans have it, too. You could call it a barrier.

Is there a downside of being a flexible, optimistic person?

Description : Is there a downside of being a flexible, optimistic person?

Last Answer : The downsides, as I see them, are - People take your optimism and flexibility as naivety and a lack of backbone. Also see Why is enthusiasm often perceived as naivety? - The perception that there's ... to you. Just work on a healthy balance and realize what others see in your outlook and actions.

Linux question on screen layout and behavior - how flexible is Ubuntu's standard interface?

Description : Linux question on screen layout and behavior - how flexible is Ubuntu's standard interface?

Last Answer : answer:I know you can do 2] because I've done it so long ago now that I can't remember how, but I would have googled something like linux move taskbar to bottom - and I recall that it was ... the layout more familiar, so there are a lot of forum posts along those lines. Not so sure about 1].

How flexible (or inflexible) should I be about what my son reads?

Description : How flexible (or inflexible) should I be about what my son reads?

Last Answer : answer:I speak from hindsight, so my advice is the one to take!! If I could go back, I would ban TV, movies, school, internet, and pretty much everything. Take my son and go and live on a mountain top. ... what life offers us the lessons it teaches us. The way we want to be, or do not want to be.

Is English a flexible language in word choice?

Description : Is English a flexible language in word choice?

Last Answer : Very. Especially the slang.

Best way to become more flexible?

Description : Best way to become more flexible?

Last Answer : answer:First, if you are not very inflexible be careful about stretching before exercising. You said you stretch during warm up, so I am going to assume you are stretching once you have ... class will increase flexibility also if you want a whole class that works on strength and flexibility.

Portland, OR, CSAs with flexible membership options?

Description : Portland, OR, CSAs with flexible membership options?

Last Answer : answer:LocalHarvest is the #1 stop to find CSAs near you. Although you can't search by share option, each page lists their options: http://www.localharvest.org/search-csa.jsp?map=1&lat=45. ... week share options, but there are plenty of others out there: http://www.localharvest.org/csa/M33886

What are some well-paying jobs with flexible hours that don't require a career?

Description : What are some well-paying jobs with flexible hours that don't require a career?

Last Answer : Some professional actors I know work as freelance, certified personal financial planners and do quite well.

Does anyone know if Flexible Spending Accounts can be used to pay for Sedation Dentistry?

Description : Does anyone know if Flexible Spending Accounts can be used to pay for Sedation Dentistry?

Last Answer : I think it can. You may need something from the dentist stating that this is neccessary for the treatment you are going to have. It is the financial coordinator's (in the dental office) ... before booking your treatment, and to send the treatment plan to the fsa if requested to secure payment.

How do I arrange a flexible presentation using any of the available presentation software tools (such as PowerPoint, Keynote or Sliderocket)

Description : How do I arrange a flexible presentation using any of the available presentation software tools (such as PowerPoint, Keynote or Sliderocket)

Last Answer : I know in Powerpoint, you can create links to specific slides in the presentation. So you could, for example, have a slide at the end of your presentation that has links to all your anticipated answer slides, and click on the appropriate link when a given question is asked.

How to buy a cheap open ended or flexible airline ticket?

Description : How to buy a cheap open ended or flexible airline ticket?

Last Answer : Not the best suggestion, but maybe find a sympathetic airline employee to sell you a "buddy" pass (at least that's what Frontier calls them). That'll let you fly standby for around $50 (or possibly $50 per ... , of course, is that if the flight is full, you'll have to wait for the next open flight.

Anyone know a good pottery studio in New York with flexible open studio hours?

Description : Anyone know a good pottery studio in New York with flexible open studio hours?

Last Answer : I really wish this got answered.

--------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : b.Programmable

Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Last Answer : a.Work handling system

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)

From the following which is the main components of Flexible manufacturing system(FMS). a.Main frame computer b.Automated guided vehicle c.Material handling system d.All of the above

Description : From the following which is the main components of Flexible manufacturing system(FMS). a.Main frame computer b.Automated guided vehicle c.Material handling system d.All of the above

Last Answer : d.All of the above

____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Description : ____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above

Last Answer : a.Flexible manufacturing system

____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Description : ____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Last Answer : b.Group technology

what causes my juniperus horizontalis to turn a light tan color, the leaves are still flexible and not dry

Description : what causes my juniperus horizontalis to turn a light tan color, the leaves are still flexible and not dry

Last Answer : Need Answer

My three brothers, my cousin and I are stood in a line. I am the shortest of all my brothers and I am at one end of the line. At the other end of the line is my cousin, who is the fattest out of all of us. My tallest brother is in the middle of the line. We cannot move away from where we stand and yet we are very flexible. We are very useful; people would struggle without us. What are we? -Riddles

Description : My three brothers, my cousin and I are stood in a line. I am the shortest of all my brothers and I am at one end of the line. At the other end of the line is my cousin, who is the ... stand and yet we are very flexible. We are very useful; people would struggle without us. What are we? -Riddles

Last Answer : Fingers.

What is the impact of flexible labour laws on workers? -SST 10th

Description : What is the impact of flexible labour laws on workers? -SST 10th

Last Answer : Flexibility in labour laws has badly affected the workers. MNCs employ them on a temporary basis in order to cut costs. They do not pay throughout the year.During peak seasons, workers are made to ... are also not given fair wages. This forces them to lead a very hard and highly insecured life.