design of steel structures 2 -Technology

design of steel structures 2 -Technology
by

1 Answer

Answer :

<i>This answer was deleted by our moderators...</i>
by

Related questions

Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Description : Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Last Answer : [ B ] Doubly reinforced sections

Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Description : Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Last Answer : [ B ] Doubly reinforced sections

Traditional Work Breakdown Structures tend to a. focus on the design of the system as oppose to the needs of the current phase and iteration b. force too many levels of detail early on for large project and they tend to allow too few level of detail for small projects c. be too specific for the project and difficult to compare across projects d. all of the above e. none of the above

Description : Traditional Work Breakdown Structures tend to  a. focus on the design of the system as oppose to the needs of the current phase and  iteration  b. force too many levels of detail early on for large ... project and difficult to compare across projects  d. all of the above  e. none of the above

Last Answer : d. all of the above

In a landscape design, properly located plants and structures. a. Can reduce heat intensity b. Need to be constantly pruned and maintained c. Block the view of the front door d. Are not essential for a good landscape design

Description : In a landscape design, properly located plants and structures. a. Can reduce heat intensity b. Need to be constantly pruned and maintained c. Block the view of the front door d. Are not essential for a good landscape design

Last Answer : Can reduce heat intensity

The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Last Answer : [ C ] 0.67

The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Last Answer : [ C ] 0.67

TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products. c. improve business procedures and product quality, resulting in improved efficiencies and costs structures. d. improve product quality resulting in improved cost structures. e. improve product quality and business procedures.

Description : TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, ... quality resulting in improved cost structures. e. improve product quality and business procedures.

Last Answer : b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products.

Process Management Initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products. c. improve business procedures and product quality, resulting in improved efficiencies and costs structures. d. improve product quality and business procedures.

Description : Process Management Initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required ... improved efficiencies and costs structures. d. improve product quality and business procedures.

Last Answer : a. improve business procedures, resulting in improved efficiencies and cost structures.

The software ................. of a program or a computing system is the structure or structures of the system, which comprise software components, the externally visible properties of those components, and the relationships among them. (A) Design (B) Architecture (C) Process (D) Requirement

Description : The software ................. of a program or a computing system is the structure or structures of the system, which comprise software components, the externally visible properties of those components, and the relationships among them. (A) Design (B) Architecture (C) Process (D) Requirement

Last Answer : (B) Architecture

Write the steps to design a database. -Technology

Description : Write the steps to design a database. -Technology

Last Answer : Steps to Design a DatabaseThere are various steps to design a database which are as follows:Step 1 Determine the purpose of your database The first step of designing a database is to determine the ... that the database structure meets the goals you needed, add all your existing data to the tables.

What are two areas of the Design View of the table? -Technology

Description : What are two areas of the Design View of the table? -Technology

Last Answer : Field description and Field properties.

What are Datasheet View and Design View? -Technology

Description : What are Datasheet View and Design View? -Technology

Last Answer : In MS-Access 2007, two types of views are available to create a table as follows:1. Datasheet View It provides a visual way to create a table. It is a simple view which arranges the ... available properties for each field and can open existing tables in Design View, add, remove or change fields.

What is the purpose of the description column in table Design View? -Technology

Description : What is the purpose of the description column in table Design View? -Technology

Last Answer : (a) A Design View of the table provides three columns as Field Name, Data Type, and Description. The description column provides the facility to write the description about Field Name.

Design View allows users to enter data in the table. -Technology

Description : Design View allows users to enter data in the table. -Technology

Last Answer : False Because Design View is used to edit the table design only.

XML is design to describe data. -Technology

Description : XML is design to describe data. -Technology

Last Answer : True The focus of XML is on the description of data, not its presentation.

Seema wants to give identical design to all the slides and handouts, she is going to print from her presentation. -Technology

Description : Seema wants to give identical design to all the slides and handouts, she is going to print from her presentation. -Technology

Last Answer : 1. Seema can do this in following two ways:(a) Creating same design on each slide and handouts manually.(b) Using slide master and handout master.2. In the first method , the efforts are ... design may creep in. The second method ensures reduce efforts and identical design on each slide and handout.

Which of the following software is/are used for design and manufacturing? (a) CAD (b) C.DA and CAM (c) CAM (d) Both (a) and (c) -Technology

Description : Which of the following software is/are used for design and manufacturing? (a) CAD (b) C.DA and CAM (c) CAM (d) Both (a) and (c) -Technology

Last Answer : (d) CAD and CAM are the two important software used in designing and manufacturing. Using CAD, designers can developed more detailed design and the final design can be combined with CAM.

Ms. Achla, works as a Programmer in a survey firm named “National Survey Foundation”. In her current project, she is supposed to design -Technology

Description : Ms. Achla, works as a Programmer in a survey firm named “National Survey Foundation”. In her current project, she is supposed to design -Technology

Last Answer : S. No.Control used to inputControl1TRAINEE’S NAMETextField2TRAINING LOCATIONRadio Button/Combo Box3GRADE THE SESSION(Excellent, Good, Satisfactory, Unsatisfactory)Radio Button/Combo Box4SUGGESTIONSText Area

Which property is to be used during design time to add a list of countries in the list box? -Technology

Description : Which property is to be used during design time to add a list of countries in the list box? -Technology

Last Answer : Model property

Ms. Juhi, works as an IT Executive in a health insurance company named 'Total Health'. She has been assigned a task to design -Technology

Description : Ms. Juhi, works as an IT Executive in a health insurance company named 'Total Health'. She has been assigned a task to design -Technology

Last Answer : S. No.Control used toControl1CUSTOMER‟S NAMETextField2CUSTOMER‟S CITYComboBox3POLICY TYPE (Individual/Family)RadioButton4INCLUSIONS (Critical Illness/Accidental Coverage/Health Checkup/Others)CheckBox/ListBox

Shambhavi has to design two Web pages with following specifications : -Technology

Description : Shambhavi has to design two Web pages with following specifications : -Technology

Last Answer : (i) Tags →, ,Attribute → type(ii) Tags →,Attribute→ bgcolour

What is design technology? Explain top down design process.

Description : What is design technology? Explain top down design process.

Last Answer : Design technology: Design technology is the manner in which we convert our concept desired system into an implementation. The three main design technologies are 1. Compilation/Synthesis ... general purpose processors and A Gate-level Netlist for special-purpose processors.

What we call the huge steel structures above a goldmine that drive the skips?

Description : What we call the huge steel structures above a goldmine that drive the skips?

Last Answer : What is the answer ?

Explain the formation of micro structures of pearlite, bainite and martensite in steel.

Description : Explain the formation of micro structures of pearlite, bainite and martensite in steel.

Last Answer : If austenite containing about 0.80 percent carbon is slowly cooled through the critical temperature, ferrite and cementite are rejected simultaneously, forming alternate plates or lamellae. This ... This phase has a tetragonal crystal structure and contains carbon in supersaturated solid solution.

Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Description : Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Last Answer : (C) Face centred cubic

Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Description : Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Last Answer : (B) Body centred cubic

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

S code for Steel structures is a) IS 236 b) IS 226 c) IS 456 d) IS 800*

Description : S code for Steel structures is a) IS 236 b) IS 226 c) IS 456 d) IS 800*

Last Answer : d) IS 800*

Which of the following structures is characterized by centralization, high formalization, extensive departmentalization, and a limited information network? (a) Technology model ; (b) Mechanistic model ; (c) Job satisfaction model ; (d) Organic model

Description : Which of the following structures is characterized by centralization, high formalization, extensive departmentalization, and a limited information network? (a) Technology model ; (b) Mechanistic model ; (c) Job satisfaction model ; (d) Organic model 

Last Answer : (b) Mechanistic model ;

If I have an idea for a phone case design, where can I go to create it ?

Description : If I have an idea for a phone case design, where can I go to create it ?

Last Answer : answer:If you're talking about the art you create for the phone case: Your work is under copyright protection the moment it is created and fixed in a tangible form that it is perceptible either directly or ... like this, so I can't tell you much else. Probably someone else can! Best of luck!

I know I have a habit of trying to design Utopias, but it looks like someone beat me to it. What do you think of the Venus Project?

Description : I know I have a habit of trying to design Utopias, but it looks like someone beat me to it. What do you think of the Venus Project?

Last Answer : answer:With the society we live in now, the only difference would be that this area would be the suburbs, except for a smaller, elite group. It’s all about money, remember. That’s amazing, though.

If you could order/design the perfect, custom, utilitarian/functional household or workplace robot what would it's specifications be?

Description : If you could order/design the perfect, custom, utilitarian/functional household or workplace robot what would it's specifications be?

Last Answer : answer:It must have a fresh pot of coffee ready for me, cup in my hand once I wake up. Weed my garden. Wash my clothes. I don’t ask fo much.

What software (platform, utility, whatever) is used to design Q & A websites like this one?

Description : What software (platform, utility, whatever) is used to design Q & A websites like this one?

Last Answer : This site is written in Python and uses the Django framework.

In the design of elastomeric bearings, why are steel plates inserted inside the bearings?

Description : In the design of elastomeric bearings, why are steel plates inserted inside the bearings?

Last Answer : For elastomeric bearing to function as a soft spring, the bearing should be allowed for bulging laterally and the compression stiffness can be increased by limiting the amount of lateral bulging. To ... , the presence of metal plates does not affect the shear stiffness of the elastomeric bearings.

Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Description : Steel beam theory is used for (A) Design of simple steel beams (B) Steel beams encased in concrete (C) Doubly reinforced beams ignoring compressive stress in concrete (D) Beams if shear exceeds 4 times allowable shear stress

Last Answer : Answer: Option C

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

The design yield stress of steel according to IS: 4561978 is: (A) 0.37 fy (B) 0.57 fy (C) 0.67 fy (D) 0.87 fy Where fy is the characteristic yield strength of steel

Description : The design yield stress of steel according to IS: 4561978 is: (A) 0.37 fy (B) 0.57 fy (C) 0.67 fy (D) 0.87 fy Where fy is the characteristic yield strength of steel

Last Answer : Answer: Option D

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Regarding the working stress design of under reinforced concrete section, (a) The neutral axis depth will be greater than that of a balanced section. (b) The stress in steel intension will reach its maximum permissible value first. (c) The moment of resistance will be less than that of the balanced section. (d) The concrete on the tension side is also be considered for calculating the moment of resistance of the section.

Description : Regarding the working stress design of under reinforced concrete section, (a) The neutral axis depth will be greater than that of a balanced section. (b) The stress in steel intension will reach ... on the tension side is also be considered for calculating the moment of resistance of the section.

Last Answer : both b&c

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

Design shear strength of concrete is a function of i.Percentage of tension steel ii.Grade of concrete iii.Grade of steel [ A ] i and ii [ B ] ii only [ C ] i and iii [ D ] i, ii and iii

Description : Design shear strength of concrete is a function of i.Percentage of tension steel ii.Grade of concrete iii.Grade of steel [ A ] i and ii [ B ] ii only [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i and ii

Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Description : Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Last Answer : [ B ] 0.87 fy

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ A ] 1.15

Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Description : Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Last Answer : [ B ] 0.87 fy

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Description : Partial safety factor for strength in steel m Limit state design is [ A ] 1.15 [ B ] 1.25 [ C ] 1.5 [ D ] 1.65

Last Answer : [ A ] 1.15

Working stress method of design results in -------------- percentages of compression steel than that of a limit state method of design [ A ] Equal [ B ] Larger [ C ] Smaller [ D ] Half of the

Description : Working stress method of design results in -------------- percentages of compression steel than that of a limit state method of design [ A ] Equal [ B ] Larger [ C ] Smaller [ D ] Half of the

Last Answer : [ B ] Larger